• No results found

Samples used for the gold layer characterisation

The presence of residual gold nanoparticles in samples interferes with the RT-qPCR assay used for gene expression profiling

The presence of residual gold nanoparticles in samples interferes with the RT-qPCR assay used for gene expression profiling

... Conclusions Although many different effects of AuNPs in PCR have been published, it is not being applied to the field of toxicology or nano-toxicology studies. There is a con- tinuing problem with assay interference ...

26

Characterisation of Irish sandstones used for building

Characterisation of Irish sandstones used for building

... The compressive strength of the Killaloe sandstone is very high ranging from 108 to 156N/mm 2 . The rock is a stiff material with a modulus of elasticity ranging from 13-15 GPa. Similarly to the other sandstones, the ...

6

The characterisation and modelling of a double-layer dunnage bag

The characterisation and modelling of a double-layer dunnage bag

... is used to provide a range of possible outcomes along with the probability that it will ...originally used for risk ...(2005) used a Monte Carlo Simulation to generate random values for thread ...

137

Optimization of Sensitivity and Stability of Gold/Silver bi-Layer Thin Films Used in Surface Plasmon Resonance Chips

Optimization of Sensitivity and Stability of Gold/Silver bi-Layer Thin Films Used in Surface Plasmon Resonance Chips

... composite layer was put on it so that the metal came into contact with the ...The layer chemical stability test was evaluated by placing the sample in a 200 cm 3 beaker containing 50 cm 3 2 M NaCl solution ...

5

The characterisation of ultrafiltration membranes used in water purification

The characterisation of ultrafiltration membranes used in water purification

... industrially used membranes probing information regarding structure, polymer composition and miscibility through a variety of NMR ...techniques. Samples used in the study are industrially used ...

150

Characterisation of High-Carbon Steel Surface Welded Layer

Characterisation of High-Carbon Steel Surface Welded Layer

... In Fig. 5 a change of fatigue crack growth rate during crack propagation from WM to HAZ is clearly shown, i.e. there is an obvious transition in the curve slope (lower slope, lower crack growth rate in WM and higher ...

6

ACQUISITION OF CARLIN TREND GOLD PROJECT WITH SAMPLES UP TO 92 g/t GOLD

ACQUISITION OF CARLIN TREND GOLD PROJECT WITH SAMPLES UP TO 92 g/t GOLD

... grab samples were randomly taken over an area of 1m 2 ...was used to obtain 1m samples from which 3 kg was pulverised to produce a 30 g charge for fire ...coarse gold that has inherent ...

13

Geochemical characterisation of gold tailings footprints on the Central Rand Goldfield

Geochemical characterisation of gold tailings footprints on the Central Rand Goldfield

... tool used for characterising environmental site contaminations and predicting environmental ...were used to anticipate pollution sources and impacts and implementation of strategies to minimise leaching of ...

169

Identification, characterisation and quantification of proteins used in chemical communication

Identification, characterisation and quantification of proteins used in chemical communication

... Chapter 3: Quantification of mouse major urinary proteins 112 technology that allows both qualitative and quantitative analysis. The Waters G2 Synapt has QuanTof technology which incorporates novel detector electronics ...

309

A Gold Anaphora Annotation Layer on an Eye Movement Corpus

A Gold Anaphora Annotation Layer on an Eye Movement Corpus

... not used hand-constructed experimental ...we used the English part of the Dundee Cor- pus: a resource of eye movement data from ten participants reading newspaper ...then used the reading times from ...

5

Characterisation of the nanotubular oxide layer formed on the ultrafine-grained titanium

Characterisation of the nanotubular oxide layer formed on the ultrafine-grained titanium

... Mechanical characterisation The nanoindentation test was performed on the sample surface using the Nanoindenter G200, Agilent ...oxide layer) for anodized sample were ...thin layer using ...

10

Characterisation of self-assembled engineered proteins on gold nanoparticles and their application to biosensing

Characterisation of self-assembled engineered proteins on gold nanoparticles and their application to biosensing

... Therefore, samples with high levels of order, such as a packed SAM, can be easily observed as the signal from the highly repetitive units is reinforced to give sharp, distinct features in the reflectivity ...

203

Synthesis, characterisation and its antimicrobial studies of silver and gold
nanoparticles and their nanoalloys

Synthesis, characterisation and its antimicrobial studies of silver and gold nanoparticles and their nanoalloys

... of gold nanoparticles (GNPs) has known advantages but usually provides the products with low nanoparticle concentration and limits its ...was used for evaluating antimicrobial property of AgNps-AuNps ...

7

Characterisation of the transverse thermoelastic properties of natural fibres used in composites

Characterisation of the transverse thermoelastic properties of natural fibres used in composites

... 3 volume fraction of 70% can be achieved through vacuum infusion as it reduces the voids in the composites. The process of vacuum infusion of natural fibre composite is discussed further by Symington [12]. Fibre mats ...

11

Resonant mode characterisation of a cylindrical Helmholtz cavity excited by a  shear layer

Resonant mode characterisation of a cylindrical Helmholtz cavity excited by a shear layer

... This paper investigates the interaction between the shear-layer over a circular cavity with a rela- tively small opening and the flow-excited acoustic response of the volume within to shear-layer ...

12

Utilising phytanic acid diastereomers for the characterisation of archaeological lipid residues in pottery samples

Utilising phytanic acid diastereomers for the characterisation of archaeological lipid residues in pottery samples

... Higher SRR/RRR ratios have been reported in marine animal tissues 24–26 compared to terrestrial, and more subtle differences in the diastereomer ratios have been used as a means to authenti- cate organic ruminant ...

6

Metagenomics detection and characterisation of viruses in faecal samples from Australian wild birds

Metagenomics detection and characterisation of viruses in faecal samples from Australian wild birds

... platforms used 1,6–10 ...biological samples by the same research group 11–13 ...biological samples with known viruses, which would have served as a useful positive control to validate the ...faecal ...

24

Growth and Characterisation of Gold-seeded Indium Gallium Arsenide Nanowires for Optoelectronic Applications

Growth and Characterisation of Gold-seeded Indium Gallium Arsenide Nanowires for Optoelectronic Applications

... SEM is a powerful technique widely used for characterisation of materials. Electron microscopes use a beam of electrons generated either by tungsten or a field emission gun. This allows the SEM to reach ...

182

Characterisation of some Clays Used for Whiteware Ceramics, II. Technological Characterization

Characterisation of some Clays Used for Whiteware Ceramics, II. Technological Characterization

... CARO [%] 92.18 7.82 Clay ESV3 [%] 64.64 35.36 Siltic clay Technological characteristics of the clays When mixed with water, the clay particles with negative surface charges behave as macroanions due to the presence of ...

8

Ultrasonic Characterisation of Heat Treated Tungsten Alloys used for TIG welding

Ultrasonic Characterisation of Heat Treated Tungsten Alloys used for TIG welding

... are used to fully define the elastic behaviour of the material ...Alloy Samples under analysis were obtained from the velocities of ultrasound that were assessed with ultrasonic pulse echo velocity ...

7

Show all 10000 documents...

Related subjects