• No results found

Suction and injection

Nanofluid Effects on the Flow with Suction or Injection Over a Moving Surface and Heat Transfer in Boundary Layer

Nanofluid Effects on the Flow with Suction or Injection Over a Moving Surface and Heat Transfer in Boundary Layer

... Abstract— In this study effect of boundary layer flow over flat plate in a nanofluid with two dimensional boundary layer. Uniform suction and injection on the flow field and heat transfer is analyzed. The ...

6

EFFECTS OF NON-UNIFORM SLOT SUCTION/INJECTION AND CHEMICAL REACTION ON MIXED CONVECTIVE MHD FLOW ALONG A VERTICAL WEDGE EMBEDDED IN A POROUS MEDIUM

EFFECTS OF NON-UNIFORM SLOT SUCTION/INJECTION AND CHEMICAL REACTION ON MIXED CONVECTIVE MHD FLOW ALONG A VERTICAL WEDGE EMBEDDED IN A POROUS MEDIUM

... or injection has attracted considerable attention of researchers due to frequent occurrence in many branches of science and ...of suction and injection has an importance in many engineering ...

13

Turbulent characteristics in flow subjected to bed suction and jet injection as a pier-scour countermeasure

Turbulent characteristics in flow subjected to bed suction and jet injection as a pier-scour countermeasure

... with suction as a result of local flow abstraction and out of the scour hole, z/h ≥ 0, the w-components is practically ...the suction and injection zone) which w-component decreased from w/U = ...bed ...

9

Heat Transfer of non-Newtonian Williamson Fluid Flow past a Circular Cylinder with Suction and Injection

Heat Transfer of non-Newtonian Williamson Fluid Flow past a Circular Cylinder with Suction and Injection

... Table 1 it can be observed from the table that increases Prandtl number Pr , Williamson fluid parameter  behavior of skin friction coefficient and nusselt number. Fig. 2(a)-2(b) are plotted to see the Prandtl number ...

5

Unsteady Stokes Flow through Porous Channel with Periodic Suction and Injection with Slip Conditions

Unsteady Stokes Flow through Porous Channel with Periodic Suction and Injection with Slip Conditions

... Abstract. This work is concerned with the influence of slip conditions on unsteady stokes flow between parallel porous plates with periodic suction and injection. The obtained unsteady govern- ing equations ...

9

Comparing thermal enhancement of Ag-water and SiO2-water nanofluids over an isothermal stretching sheet with suction or injection

Comparing thermal enhancement of Ag-water and SiO2-water nanofluids over an isothermal stretching sheet with suction or injection

... The boundary layer flow and heat transfer past a stretching sheet have received a wide range of attention among researchers. Crane [6] was the first who obtained an analytical solution for laminar boundary layer flow ...

13

A STUDY OF MAGNETIC EFFECT ON FLOW BETWEEN TWO PLATES WITH SUCTION OR INJECTION WITH SPECIAL REFERENCE TO CASSON FLUID

A STUDY OF MAGNETIC EFFECT ON FLOW BETWEEN TWO PLATES WITH SUCTION OR INJECTION WITH SPECIAL REFERENCE TO CASSON FLUID

... b) Suction Case(A > 0): The velocity of the fluid, when the plates approaching or receding each other are given in ...with suction and injection ...

9

Unsteady boundary layer flow of a micropolar fluid near a stagnation point with uniform suction or injection

Unsteady boundary layer flow of a micropolar fluid near a stagnation point with uniform suction or injection

... The studies mentioned above deal with steady flows, but many problems of practical interest may be unsteady. The problem of unsteady forced convection flow has long been a major subject in fluid mechanics because of its ...

17

Laminar Viscous Flow of Micropolar Fluid through Non-Darcy Porous Medium Undergoing Uniform Suction or Injection

Laminar Viscous Flow of Micropolar Fluid through Non-Darcy Porous Medium Undergoing Uniform Suction or Injection

... through suction or injection in a non-Darcy porous medium with high mass transfer is ...during injection and slight radial velocity decrease for suction ...during injection while during ...

8

Local nonsimilarity solution for the impact of the buoyancy force on heat and mass transfer in a flow over a porous wedge with a heat source in the presence of suction/injection

Local nonsimilarity solution for the impact of the buoyancy force on heat and mass transfer in a flow over a porous wedge with a heat source in the presence of suction/injection

... Abstract: Combined heat and mass transfer in free, forced and mixed convection flows along a porous wedge with internal heat generation in the presence of uniform suction or injection is[r] ...

11

Comparing the role of subcision suction method with and without the injection of platelet-rich plasma in the treatment of depressed scars

Comparing the role of subcision suction method with and without the injection of platelet-rich plasma in the treatment of depressed scars

... by injection of PRP is most effective in the treatment of post-acne scars and all de- pressed facial ...PRP injection is a new and promis- ing modality for the treatment of scars without the risk of ...

10

On unsteady MHD mixed convection in a nanofluid due to a stretching/shrinking surface with suction/injection using the spectral relaxation method

On unsteady MHD mixed convection in a nanofluid due to a stretching/shrinking surface with suction/injection using the spectral relaxation method

... with suction/injection subject to a number of source terms including Dufour and Soret effects, heat generation, an applied magnetic field and viscous dissipa- ...

17

Temperature profile of a power-law fluid over a moving wall with arbitrary injection/suction and internal heat generation/absorption

Temperature profile of a power-law fluid over a moving wall with arbitrary injection/suction and internal heat generation/absorption

... an injection/suction term in the boundary conditions of the governing equations for a power-low fluid flowing over a moving ...arbitrary injection/suction ...

12

Thermal and Solutal Mixed Marangoni Boundary Layers with Suction or Injection Effects

Thermal and Solutal Mixed Marangoni Boundary Layers with Suction or Injection Effects

... the suction/ injection parameter increases from injection to suction, the velocity, temperature and concentration boundary layers thickness decrease but injection increases ...

10

MHD FLOW IN A CIRCULAR HORIZONTAL PIPE UNDER HEAT SOURCE/SINK WITH SUCTION/INJECTION ON WALL

MHD FLOW IN A CIRCULAR HORIZONTAL PIPE UNDER HEAT SOURCE/SINK WITH SUCTION/INJECTION ON WALL

... and Kondaxakis (2007) checked the time-dependent viscous flow in a suction porous pipe. They introduced a correct answer as time-differing suction on the porous wall. Cox and Hill (2011) have examined the ...

8

PULSATILE MOTION OF BLOOD IN A CIRCULAR TUBE OF VARYING CROSS-SECTION WITH SLIP FLOW

PULSATILE MOTION OF BLOOD IN A CIRCULAR TUBE OF VARYING CROSS-SECTION WITH SLIP FLOW

... Abstract Pulsatile motion of blood in a circular tube of varying cross-section has been developed by considering slip flow at the tube wall and the blood to be a non- Newtonian biviscous incompressible fluid. The tube ...

10

Scaling group transformation for MHD boundary layer flow of a nanofluid past a vertical stretching surface in the presence of suction/injection

Scaling group transformation for MHD boundary layer flow of a nanofluid past a vertical stretching surface in the presence of suction/injection

... On the other ary layer thicknesses but decreases the thermal and nanoparticle hand if is showed that the seoaration factor for common nanofluids volume fraction boundary layers thickness[r] ...

7

Boundary layer flow of nanofluid over an exponentially stretching surface

Boundary layer flow of nanofluid over an exponentially stretching surface

... In this study, we have discussed the boundary layer flow of nanofluid over an exponentially stretching sur- face with suction and injection. To the best of our knowledge, the nanofluid over an exponentially ...

6

Heat transfer characteristic of nanofluids on 
		MHD stagnation point flow 
		towards stretching or shrinking plate in the presence of injection or 
		suction

Heat transfer characteristic of nanofluids on MHD stagnation point flow towards stretching or shrinking plate in the presence of injection or suction

... Figure-11 and Figure-12, depicts the influence of Eckert number (Ec). Ec is nothing but the parameter for viscous dissipation. Viscous dissipation is the frictional loss of energy, when the fluid is sheared. In Figure-11 ...

10

Vol 6, No 10 (2015)

Vol 6, No 10 (2015)

... viscosity, suction and injection velocity, couple stress parameter, and external uniform magnetic field, on the unsteady flow and temperature distributions of an electrically conducting viscous ...

8

Show all 10000 documents...

Related subjects