Ti-Co
Electric and Thermoelectric Properties of LaFeO3 Compounds Doped by Ti, Co and Cu ions
... Decreases in J c were observed for higher number of laser pulses of BSO deposition, which might be explained by the crystallinity degradations of the BSO-added GdBCO films, whic[r] ...
6
Elemental Analysis of Soil around Ikot Abasi L.G.A, Nigeria Using Edxrf.
... The EDXRF technique was capable of detecting the presence of fourteen elements (K, Ca, Ti, V, Mn, Fe, Co, Zn, Pb, Br, Sr, Zr, Nb and Mo). This technique has been able to determine the presence of Pb and Zn ...
6
Atomic Layer Deposition of Pt Nanoparticles for Microengine with Promoted Catalytic Motion
... [38]. These factors also cause the change of the shapes of Pt nanoparticles when they are deposited on nanomem- branes with oxide and metal top layer. However, it should be mentioned that, for the sake of simplicity, we ...
8
Osteocompatibility of Stainless Steel, Co Cr Mo, Ti 6Al 4V and Ti 15Zr 4Nb 4Ta Alloy Implants in Rat Bone Tissue
... the Co concentration in the tibia tissue with the Co–Cr–Mo alloy implant was low, and it increased up to 24 weeks and slightly decreased at 48 weeks after ...or Co–Cr–Mo alloy implant. Minute ...
8
Ab Initio Prediction of Atomic Location of Third Elements in B2 Type TiNi
... prefers Ti site because the Sc-Ni bonding is optimal. Mn, Fe and Co prefer Ni site because the Ti-Mn, Ti-Fe and Ti-Co bondings are ...
6
Site Preference and Stabilization of Antiferromagnetism in M Substituted Mn2−xMxSb (M = Ti, Cr, Co, or Cu)
... magnetic ground state cannot be distinguished between FR or AF. Unfortunately, our results for M = Ti or Co disagree with the experimental results, 2) because the FR (AF) state is more stable than the AF ...
9
The oxidation behaviour of alloys based on the Ni–Co–Al–Ti–Cr system
... Ni– Co–Al–Ti–Cr quinary system have been ...and Ti content, increasing Cr concentrations from 10 to 20 ...and Co, resulted in a systematic reduction in the mass gained after a 100-hour ...in ...
17
ASSESSING EOLIAN DUST INPUTS TO SOILS IN DRY CREEK EXPERIMENTAL WATERSHED, SW IDAHO
... versus Ti concentrations for the bedrock, soils, loess, and basalt. In U-Ti compositional space, it appears that the soils plot between the space occupied by the bedrock and loess fields, which is ...
92
The microstructure and hardness of Ni-Co-Al-Ti-Cr quinary alloys
... The solvus temperatures measured using DSC can be used to account for the relative precipitate sizes observed in Figures 2, 3 and 4. Since the material was not subjected to an ageing heat treatment to modify the ...
21
Characteristics and Catalytic Properties of Ni/Ti Si Composite Oxide Catalysts via CO<sub>2</sub> Hydrogenation
... between 23 and 26 wt%, while Ti contents were at 22.3 and 21.4 wt% for NiTiSSP and NiTiMCM, respectively. The XPS (The depth of XPS analysis is about 10Å) convinces the external surface element concentrations ...
11
The formation of ordered clusters in Ti-7Al and Ti-6Al-4V
... is impossible, and also in samples that have been subjected to hydrogen-related hot salt stress corrosion cracking [10]. Moreover, planar slip was reported to occur [14] in alloys which were aged at 500 C, with the slip ...
27
CORROSION BEHAVIOR OF BIOCOMPATIBLE (CP-TI) AND (TI-SI) ALLOYS
... alkalis. Ti-alloys also display superior resistance to cavitation, erosion or impingement attacks in the environment over an extensive range of aggressiveness, and importantly their accepted mechanical properties ...
9
Comparative Evaluation of Shear Bond Strength of Heat Polymerised Acrylic Resin to Surface Treated Cobalt-Chromium and Titanium Alloys: An In Vitro Study
... and Co-Cr and Ti alloy with two metal primers containing 4-META and MDP respectively and concluded that primer containing MDP is more effective at bonding than carboxylic primers such as ...and Co-Cr ...
132
“Bioaccumulation of Heavy Metals in Bones, and Brains of Some Aquatic Species at the Northwestern part of Suez Gulf” by E. A. Omayma, E. Mona, A. F. Nazik, Egypt.
... to various disorders, including cancer, allergic disease, liver damage and lung irritation. Cobalt is beneficial for humans because it is a part of vitamin B12, however, exposure to high levels of cobalt can result in ...
17
Biocompatibility Evaluation of Ti 15Al 33Nb(at%) and Ti 21Al 29Nb(at%)
... and Ti–21Al–29Nb-treated calvaria slides were observed using the OM at 40 magnification, see ...CP Ti treated calvaria showed intense reddish- brown staining indicating larger quantities of T-cells com- ...
9
Enhanced Phenomena in Metals with Electric and Magnetic Fields: II Magnetic Fields
... mono-variant ordered domain was obtained from disordered single crystal of Fe–49.8%Pd alloy when the alloy was aged in a field of 10 T at temperatures at which the ordering occurred by nucleation and growth. Though not in ...
5
Comparative evaluation of the microgap at the implant-abutment interface with premachined and customized laser-sintered cobalt-chromium abutments: An In Vitro study
... less bacterial colonization, tissue alteration, and tension on retaining screws. 2,23 The main abutment manufacturing techniques are milling, casting and laser-sintering. The control of roughness on the mating surfaces ...
170
A Non-Enzymatic Glucose Sensor Based on Pd-Fe/Ti Nanocomposites
... synthesis, Ti plates were immersed into the aqueous solutions of Pd and Pd-Fe particles, and sodium borohydride was used as reducing agent under optimal temperature and reagent ...the Ti plates, but also to ...
11
Fatigue Property of Super Elastic Ti Ni Alloy Dental Castings
... and Co–Cr alloy, the wire should be bent in the shape of coil or loop to adjust the delivered ...super-elastic Ti–Ni alloy, and a simple, hygienic and esthetic method was developed for orthodontic ...
9
Dissimilar Metal Joining of 2024 and 7075 Aluminium Alloys to Titanium Alloys by Friction Stir Welding
... by Ti alloy chips. The hardness near the joint interface of the Ti alloy side was higher than that of the Ti alloy base ...the Ti alloy side was much wider than that of the mixed region ...
5