• No results found

voltage-source converters control

DECOUPLED DQ-CURRENT CONTROL OF GRID-TIED VOLTAGE SOURCE CONVERTERS

DECOUPLED DQ-CURRENT CONTROL OF GRID-TIED VOLTAGE SOURCE CONVERTERS

... grid-connected voltage source inverters ...current control strategies to maintain system stability and are more susceptible to interference caused by grid voltage distortion because of ...

9

A Novel Dc Voltage Control System For D -Statom On Hybrid Convertor Using Renewable Energy Source

A Novel Dc Voltage Control System For D -Statom On Hybrid Convertor Using Renewable Energy Source

... DC voltage is considered by some ...H-bridge converters with unequal DC voltage supplies. The mentioned control method is not suitable for STATCOM system because the DC sources are replaced by ...

6

Investigation of the impact of interoperability of voltage source converters on HVDC grid fault behaviour

Investigation of the impact of interoperability of voltage source converters on HVDC grid fault behaviour

... high voltage, a large number of IGBTs must be connected in series to ensure even voltage sharing between individual IGBTs during turn- on and ...to control the gate signals of the IGBTs for reduced ...

6

Cascaded H-Bridge Five Level Inverter for Harmonics Mitigation and Reactive Power Control

Cascaded H-Bridge Five Level Inverter for Harmonics Mitigation and Reactive Power Control

... as voltage sag, swell, harmonics flicker ...provides voltage support, while a DSTATCOM is employed at the distribution level or at the load end for dynamic ...any control algorithm should be to make ...

8

Design and implementation of SVPWM based Voltage Source Converters with Extended Selective Harmonic Compensation

Design and implementation of SVPWM based Voltage Source Converters with Extended Selective Harmonic Compensation

... age source convert ers in AC p ower ...or control algorithm in VSC provides different functions such as reactive power compensation for Power fact or correct ion, Harmonic Elimination, Load balancing for ...

10

An Optimal Energy Management Strategy for Standalone DC Microgrids

An Optimal Energy Management Strategy for Standalone DC Microgrids

... main control objective is to find out the stability of dc micro grid that can be obtained from the stability of dc bus voltage level ...The voltage level of grid-connected dc micro grids can be ...

6

Design and Control of Power Converters for Medium Voltage DC Applications Enabled by Medium Voltage SiC-MOSFETs.

Design and Control of Power Converters for Medium Voltage DC Applications Enabled by Medium Voltage SiC-MOSFETs.

... DC/DC converters with medium frequency transformers are used in the DC grid instead of the large and bulky AC ...several voltage steps are needed ...medium voltage DC distribution ...

228

Hierarchical control of offshore wind farm connected by parallel diode-rectifier based HVDC and HVAC links

Hierarchical control of offshore wind farm connected by parallel diode-rectifier based HVDC and HVAC links

... to control the offshore frequency and voltage. Thus, WT converters have to behave as grid-forming converters to establish the offshore AC voltage and ...A voltage and frequency ...

10

Control Techniques and Low-Cost Permanent Magnet Synchronous Generator Design for Small Wind Power Generation Plant K. S. L. Kaashyap

Control Techniques and Low-Cost Permanent Magnet Synchronous Generator Design for Small Wind Power Generation Plant K. S. L. Kaashyap

... full-scale voltage source converters is a promising configuration, but still not used popularly ...robust control systems for maximum wind power extraction and grid ...a voltage ...

5

Performance of DC Voltage Control of Multi- Terminal VSC- HVDC Systems

Performance of DC Voltage Control of Multi- Terminal VSC- HVDC Systems

... Voltage source converters (VSC) on the other hand do not need reversal of polarity for changing the direction of power flow and also are capable of independent control of active and reactive ...

7

High frequency unity power factor resonant converter with adjustable brightness for electronic ballast lamp applications

High frequency unity power factor resonant converter with adjustable brightness for electronic ballast lamp applications

... the source and also inject harmonics in the ...AC voltage needs to be converted to DC with DBR (Diode Bridge Rectifier) with an attachment of high rating capacitor for reduction of ripples in the DC output ...

7

Active-forced-commutated bridge using hybrid devices for high efficiency voltage source converters

Active-forced-commutated bridge using hybrid devices for high efficiency voltage source converters

... actively control the turn-on and turn-off of the main thyristor bridge by applying a stepped transition volt- age with appropriate magnitude and polarity, which offers soft switching and forced commutation to the ...

5

Review Grid Connected Wind Photovoltaic Cogeneration Using Back to Back Voltage Source Converters

Review Grid Connected Wind Photovoltaic Cogeneration Using Back to Back Voltage Source Converters

... (PV) control is an alternate guaranteeing clean energy wellspring a result it will be worldwide Furthermore could a chance to be utilized without utilizing a rotational ...PV control need aid to some degree ...

5

Unified Power Flow Controller: Modeling And Dynamic Characteristic

Unified Power Flow Controller: Modeling And Dynamic Characteristic

... two Voltage Source Converters (VSC) connected respectively in shunt and in series with the transmission line, and connected to each other by a common DC link including a storage ...for voltage ...

9

Multiport power electronics circuitry for integration of renewable energy sources in low power applications : a thesis presented in partial fulfilment of the requirements for the degree of Doctor of Philosophy in Electrical Engineering at Massey Universit

Multiport power electronics circuitry for integration of renewable energy sources in low power applications : a thesis presented in partial fulfilment of the requirements for the degree of Doctor of Philosophy in Electrical Engineering at Massey University, Palmerston North, New Zealand

... pulsating source cells (PSCs) are extracted from the six basic non-isolated converters like buck, boost, buck–boost, Cuk, Zeta, and SEPIC ...input converters (MICs) have been generated by inserting ...

181

Design and Control of Single Phase PWM Rectifier using Two IGBT

Design and Control of Single Phase PWM Rectifier using Two IGBT

... load voltage and source ...and control circuit are modelled and verified for required load voltage and source current is controlled inphase with the source ...connected, ...

6

CONTROL OF PARALLEL -CONNECTED MODULAR MULTILEVEL CONVERTERS

CONTROL OF PARALLEL -CONNECTED MODULAR MULTILEVEL CONVERTERS

... HIGH voltage direct current (HVDC has been applied widely to increase the capability for power transmission and link different ac networks together ...either voltage-source converter (VSC) based or ...

6

Control Topology for Emulating the Behavior of Synchronous Machines in Voltage Source Converters

Control Topology for Emulating the Behavior of Synchronous Machines in Voltage Source Converters

... torque control loop adjusts the dc-link voltage in a way such that the damping and synchronizing torques are generated within the controller during transients similar to ...torque control loop ...

7

Voltage Control for DC-DC Converters

Voltage Control for DC-DC Converters

... output voltage of the buck converter to ...pulse source which was used to trigger a positive edge of 0 to 10A, and negative edge of 10 to 0A at the load ...output voltage was well regulated near ...

7

Impedance Source Inverter for Wind Energy Conversion System

Impedance Source Inverter for Wind Energy Conversion System

... suppress voltage ripple and serve temporary ...impedance source inverter have two inductors and two ...suppress voltage as well as current ...

13

Show all 10000 documents...

Related subjects