Wear scar
Method for the location of primary wear scars from retrieved metal on metal hip replacements
... explaining wear behaviour of hip implants because the effect and importance of many var- iables are currently ...hip wear, such as primary wear scar ...
5
A REVIEW ON ADDITION OF ZINC DIALKYLDITHIOPHOSPHATE IN VEGETABLE OIL AS PHYSICAL PROPERTIES IMPROVER
... In conclusion, addition of ZDDP as additive in lubricant will give better performance and act as an improver of physical properties in certain vegetables oil and other additives compare to vegetables oils without ZDDP. ...
5
An in-situ synchrotron XAS methodology for surface analysis under high temperature, pressure and shear
... the wear scar and thus make it easier to be ...the wear scar to be scanned during the XAS experiments and thus obtaining a more accurate averaged ...
21
Friction and wear behaviour of Mo − W doped carbon based coating during boundary lubricated sliding
... the wear tracks and the wear scar produced on the counterpart using optical and scanning electron microscopy (SEM), surface profilometer and Raman ...the wear tracks was carried out by ...
51
A Statistical Model For Deterimining Friction And Wear Of SK 11 In Engine Oil
... between wear scar diameter and contact resistance, the specific speed method has larger contact resistance than the standard test method because it possess a better initial lubricant ...no wear scars ...
24
Performance evaluation of HVOF deposited cermet coatings under dry and slurry erosion
... material loss, as identified by previous research [21,22] can be attributed to cutting and scoring of the ductile surface. Repeated impact leads to the formation of lips, as indicated in Figure 14a. Continued exposure to ...
37
Tribological properties of aluminum lubricated with palm olein at different load using pin-on-disk machine
... The increased global demand for biofuels has prompted the search for alternatives to edible oils for bio- lubricant production. Today, vegetable oil much desired for its application as lubricant in various application ...
15
Engine oil wear resistance
... reduce wear by creating lubricating film between the moving parts hence reduce metal-to-metal ...the wear scar, the better the lubricant since the lubricant can protect the moving surfaces from ...
11
Tribological evaluation on various formulation of modified RBD palm olein as sustainable metalworking fluids for machining process
... balls wear test method (ASTM D4172) using a four ball tester machine DUCOM TR-30 L to evaluate the tribology behaviours of ...mean wear scar diameter (MWSD) of the stationary balls was measured ...
5
Enhanced approach of assessing the corrosive wear of engineering materials under impingement
... Corrosive wear phenomena are apparent in hydraulic machinery that handle ...of wear scar depths and volumes, that yield the quantification of the various material degradation processes that occur ...
14
Friction and wear of bearing material under water contaminated compressor oil
... Water has been defined as a destructive contaminant which may cause a detrimental impact on bearing performance. Nevertheless, many previous studies only made the research after the lubrication failure occurred, but they ...
11
The Effect on Diesel Injector Wear, and Exhaust Emissions by Using Ultralow Sulphur Diesel Blending with Biofuels
... the wear scar diameter for various loads for pure petroleum diesel and petroleum diesel adding 20 mass% biodiesel are shown in ...the wear scar diameter of the ball increases with the applied ...
6
CFD study of fluid flow changes with erosion
... Different turbulence models were assessed for the jet impingement. The first one was the k − model [21], which has repeatedly been used to predict erosion in the jet impingement test as well as other configurations [6, ...
39
Antimony Dithiocarbamates as Multifunctional Lubricant Additives
... of wear scar diameter and coefficient of friction was observed due to the presence of FeO / FeS/ SbS 3 / Sb 2 O 3 film formed by the interaction of the decomposition ...
6
Friction and wear phenomena of vegetable oil based lubricants with additives at severe sliding wear conditions
... in wear resistance at extreme contact condition, the addition of ZDDP additive in both PO and SBO has seen improvement in wear scar appearance in which narrower width of wear scars were ...
32
Tribo-corrosion properties of cobalt-based medical implant alloys in simulated biological environments
... Figure 9 Co 2p3/2 peaks obtained from the wear scar for HC CoCrMo in DMEM and 0.36% NaCl Figure 10 Anodic polarization AP curves for HC CoCrMo in a DMEM b 0.36% NaCl under sliding and in[r] ...
28
Corrosive wear behaviour of various stainless steel alloys and a Stellite 6 weld cladding
... corrosive wear behaviour of UNS S31600, a low hardness (280Hv) UNS S42000, a high hardness (480Hv) UNS S42000 and a single layer Stellite 6 (UNS R30006) weld cladding on a low alloy carbon steel (UNS ...losses, ...
12
Erosion-corrosion behaviour of Zirconia WC-6Co, WC-6Ni and SS316
... The wear scar produced by the testing regime is analysed using Scanning Electron Microscopy (SEM) and Optical 3D Imaging and the findings will be ...
25
Sliding wear analysis of cobalt based alloys in nuclear reactor conditions
... of wear on the test components over the temperature and load ...the wear of the alloys are impacted by load and temperature in conditions reproducing nuclear reactor ...ball scar and wear ...
20
Influence of Ag Nanoparticles for the Anti-wear and Extreme Pressure Properties of the Mineral Oil Based Nano-cutting Fluid
... the wear scar and friction coefficient along with a huge enhancement in thermal performance, even for the small fraction of ...flank wear and nodal temperature by ...and wear preventive ...
8