• No results found

Wind Energy in Built Environment

Integration of aero elastic belt into the built environment for low energy wind harnessing: current status and a case study

Integration of aero elastic belt into the built environment for low energy wind harnessing: current status and a case study

... Xie et al. [46] proposed triboelectric nanogenerator (TENG) that was able to harvest miniature wind energy ambient in normal human habitats developed utilising common materials. This system had a rotating ...

45

Wind Turbine Power Output Assessment in Built Environment

Wind Turbine Power Output Assessment in Built Environment

... the wind velocity profile in the built ...the wind velocity profile in the built environment is very important for finding out the energy content in the wind and also to ...

10

Application of a Passive Cooling Wind Catcher within the Built Environment: Numerical and Experimental Analysis

Application of a Passive Cooling Wind Catcher within the Built Environment: Numerical and Experimental Analysis

... of wind catchers as a low energy alternative to HVAC systems has the potential to improve the thermal comfort of occupants, the indoor air quality and reduce energy consumption and greenhouse gas ...

12

The role of built environment energy efficiency in a sustainable UK energy economy

The role of built environment energy efficiency in a sustainable UK energy economy

... building energy standards and, to date, the mechanisms for improvement have been government- sponsored voluntary initiatives promoting efficiency upgrades or low-carbon ...renewable energy systems, heat ...

5

Integration of aero-elastic belt into the built environment for low-energy wind harnessing : current status and a case study

Integration of aero-elastic belt into the built environment for low-energy wind harnessing : current status and a case study

... The work investigates the effect of various wind speeds and aero-elastic belt locations on the performance of the device giving insight on the potential for integration of the harvester [r] ...

39

Integration of aero-elastic belt into the built environment for low-energy wind harnessing: Current status and a case study

Integration of aero-elastic belt into the built environment for low-energy wind harnessing: Current status and a case study

... The work investigates the effect of various wind speeds and aero-elastic belt locations on the performance of the device giving insight on the potential for integration of the harvester [r] ...

40

Preparing the built environment for climate change

Preparing the built environment for climate change

... of wind, storm damage and driving rain, in contrast to Shimoda (2003) who deals almost entirely with warming in the urban heat ...of energy in urban areas, and many of the technical measures discussed by ...

11

Evaluation of the integration of the Wind-Induced Flutter Energy Harvester (WIFEH) into the built environment : experimental and numerical analysis

Evaluation of the integration of the Wind-Induced Flutter Energy Harvester (WIFEH) into the built environment : experimental and numerical analysis

... Electrical signal open-circuit voltage of the Wind-Induced Flutter Energy harvester WIFEH without membrane retensioning under 5m/s flow velocity The membrane of the WIFEH was then retens[r] ...

42

Evaluation of the integration of the Wind-Induced Flutter Energy Harvester (WIFEH) into the built environment: Experimental and numerical analysis

Evaluation of the integration of the Wind-Induced Flutter Energy Harvester (WIFEH) into the built environment: Experimental and numerical analysis

... Open-circuit voltage of the Wind-Induced Flutter Energy Harvester WIFEH without membrane retensioning under 2.3 m/s flow velocity Without prior retensioning the membrane, the wind tunnel[r] ...

43

Evaluation of the integration of the Wind Induced Flutter Energy Harvester (WIFEH) into the built environment: experimental and numerical analysis

Evaluation of the integration of the Wind Induced Flutter Energy Harvester (WIFEH) into the built environment: experimental and numerical analysis

... Open-circuit voltage of the Wind-Induced Flutter Energy Harvester WIFEH without membrane retensioning under 2.3 m/s flow velocity Without prior retensioning the membrane, the wind tunnel[r] ...

42

What are the factors that could influence the future of work with regard to energy systems and the built environment?

What are the factors that could influence the future of work with regard to energy systems and the built environment?

... Permanent repository link: http://openaccess.city.ac.uk/12253/ Link to published version: http://dx.doi.org/10.1016/j.enpol.2008.09.068 Copyright and reuse: City Research Online aims to [r] ...

6

Modelling dependency structural of the wind energy in Lebanon

Modelling dependency structural of the wind energy in Lebanon

... renewable energy in 20 years, and some of this production could be provided by wind ...put wind turbines everywhere but, unlike solar energy, the wind turbine produces more power over a ...

12

Integrating Solar Energy in Rome's Built Environment: A Perspective for Distributed Generation on Global Scale

Integrating Solar Energy in Rome's Built Environment: A Perspective for Distributed Generation on Global Scale

... solar energy technologies in Rome’s built environment epitomizes the needed general adoption of distributed generation via functionalization of buildings of all size and end use across the world, to ...

10

Developing a New Management Model for the Built Environment: The Built Environment Management Model BEM2 and BEM3

Developing a New Management Model for the Built Environment: The Built Environment Management Model BEM2 and BEM3

... “Built Environment Management Model” (BEM2), as well as its complementing assessment tool, the “Built Environment Management Maturity Model” (BEM3), present industry neutral instruments to ...

9

What are the factors that could influence the future of work with regard to energy systems and the built environment?

What are the factors that could influence the future of work with regard to energy systems and the built environment?

... The paper begins by discussing the challenge of prediction of future trends, especially in a field apparently so reliant upon technological change and innovation. Because of these problems, the paper concerns itself not ...

26

Review of Wind Energy Market Ankita C. Bagul, Arun M. Kulkarni, Amol S. Dayma

Review of Wind Energy Market Ankita C. Bagul, Arun M. Kulkarni, Amol S. Dayma

... Wind policy framing in India happens at the central and state levels. The central government through the MNRE and its agencies develop federal level policies, and the states are allowed to develop their own ...

6

The built environment interdiscipline: A theoretical model for decision makers in research and teaching

The built environment interdiscipline: A theoretical model for decision makers in research and teaching

... It will be seen that each of these definitions describes the field in terms of its various fields of application, rather than by attempting to define its cognitive base. This is entirely appropriate for an applied field ...

14

Impact of Culture on Rural Built Environment

Impact of Culture on Rural Built Environment

... on built environment Age proves to be an influencing factor and younger people stay more critical at architectural ...for built environments that differ from their familiar urbanized ones; any ...

7

Sustainable refurbishment for an adaptable built environment

Sustainable refurbishment for an adaptable built environment

... its energy consumption. The general trend is for energy prices to rise, despite some intermittent falls, which are often mitigated in the retail price by increasing related taxes (IEA, 2016; ITRE, ...The ...

23

APA referencing for Built Environment students

APA referencing for Built Environment students

... articles. Use it when there is one. They are usually long, so copy and paste... Where a journal article comes from the Internet, the simplest way to reference it is to insert [Electroni[r] ...

13

Show all 10000 documents...

Related subjects