• No results found

[PDF] Top 20 Carbon Coated SnO2 Nanorod Array for Lithium Ion Battery Anode Material

Has 10000 "Carbon Coated SnO2 Nanorod Array for Lithium Ion Battery Anode Material" found on our website. Below are the top 20 most common "Carbon Coated SnO2 Nanorod Array for Lithium Ion Battery Anode Material".

Carbon Coated SnO2 Nanorod Array for Lithium Ion Battery Anode Material

Carbon Coated SnO2 Nanorod Array for Lithium Ion Battery Anode Material

... uniformly coated carbon, electrons can easily reach any positions where Li ? -ion intercalation takes ...the battery is cycled at a high current ... See full document

5

Lithium Ion Battery Anodes Produced from Densified, Silicon Coated, Carbon Nanotube Arrays.

Lithium Ion Battery Anodes Produced from Densified, Silicon Coated, Carbon Nanotube Arrays.

... A vapor phase catalyst deposition method was used to grow carbon nanotubes. A low pressure chemical vapor deposition system (LPCVD) suitable for this method was custom built as shown in Figure 3.2. The furnace ... See full document

110

Nanorod Cuprous Oxide as Anode for Sodium Ion Battery

Nanorod Cuprous Oxide as Anode for Sodium Ion Battery

... The anode consists of synthetic cuprous oxide, acetylene black, sodium carboxymethylcellulose in a ratio of ...the anode was prepared using CMC as a binder, the above materials were mixed with deionized ... See full document

8

Critical Influence of Carbon Nitride Self-assembly Coating on the Electrochemical Performance of SnO2-TiO2 Nanocomposite Anode Material for Lithium Ion Battery

Critical Influence of Carbon Nitride Self-assembly Coating on the Electrochemical Performance of SnO2-TiO2 Nanocomposite Anode Material for Lithium Ion Battery

... of lithium ion batteries (LIBs) to electrical vehicles, grid energy storage, and other large power applications ...an anode material in commercial lithium secondary ...when ... See full document

12

Self-sacrificed Synthesis of Amorphous Carbon-Coated SiOx as Anode Materials for Lithium-Ion Batteries

Self-sacrificed Synthesis of Amorphous Carbon-Coated SiOx as Anode Materials for Lithium-Ion Batteries

... carbon coating, all Li-battery cells were tested by electrochemical impedance spectroscopy (EIS) measurement after 70th cycling test (Figure 7d) with detailed data summarized in Table 1. According to the ... See full document

14

Capacity Improvement of Tin-Deposited on Carbon-Coated Graphite Anode for Rechargeable Lithium Ion Batteries

Capacity Improvement of Tin-Deposited on Carbon-Coated Graphite Anode for Rechargeable Lithium Ion Batteries

... KANTO chemical) was used as the electrolyte. The electrolyte was used as received without further purification and was stored in an Ar-filled glove box. Electrochemical measurement was performed using a 2-electrode ... See full document

12

Rate Performance Enhancement of Anode for Lithium-Ion Battery via Composition of Hard Carbon And Silicon-Carbon Nanofiber

Rate Performance Enhancement of Anode for Lithium-Ion Battery via Composition of Hard Carbon And Silicon-Carbon Nanofiber

... the anode electrode, the mixed slurry was coated on a copper foil (18 μm thick), dried at 120°C under vacuum for 12 h, pressed using a roll-type mill under 100 MPa of pressure, cut into discs (12 mm in ... See full document

8

Cu2+1O coated polycrystalline Si nanoparticles as anode for lithium ion battery

Cu2+1O coated polycrystalline Si nanoparticles as anode for lithium ion battery

... expansion. Carbon, metal, metal oxide and conducting polymers are used as the shell materials, which can act as both conduct- ing and mechanical supporting material ... See full document

6

Synthesis of Novel Azophenylbenzotriazole and Its Application as Anode Materials for Lithium Ion Batteries

Synthesis of Novel Azophenylbenzotriazole and Its Application as Anode Materials for Lithium Ion Batteries

... conductive carbon black were uniformly ground in an agate mortar. The anode material to be tested was added after around 30 minutes and the compound was further ground for about 30 ...evenly ... See full document

11

Synthesis of Porous CoO Nanorods @ N-doped Carbon as High- Performance Lithium Ion Battery Anode

Synthesis of Porous CoO Nanorods @ N-doped Carbon as High- Performance Lithium Ion Battery Anode

... As lithium ion battery anode, the porous CoO nanorods @ N doped carbon should be ...surface carbon can effectively improve its electrochemical conductivity, resulting in enhanced ... See full document

11

Preparation of SnO2 Nanoparticle and Performance as Lithium-ion Battery Anode

Preparation of SnO2 Nanoparticle and Performance as Lithium-ion Battery Anode

... As early as 2000, Tarascon’s research group reported that electrodes made of nanoparticles of transition-metal oxides (MO, where M is Co, Ni, Sn or Fe) demonstrated electrochemical capacities of more than 700 mAh g -1 ... See full document

7

SnO2 Nanowires on Carbon Nanotube Film as a High Performance Anode Material for Flexible Li-ion Batteries

SnO2 Nanowires on Carbon Nanotube Film as a High Performance Anode Material for Flexible Li-ion Batteries

... rechargeable lithium batteries are required for various applications such as wearable devices and hybrid electric ...full battery is high due to the price of copper foil in the ... See full document

6

High Rate Capability of Nd-Doped Li4Ti5O12 as an Effective Anode Material for Lithium-Ion Battery

High Rate Capability of Nd-Doped Li4Ti5O12 as an Effective Anode Material for Lithium-Ion Battery

... as carbon, Ag and polyacene ...an anode with very low power tap density, which significantly decrease the volumetric density of ...Coating carbon on the surface or compositing with carbon ... See full document

9

Preparation and electrochemical properties of carbon-coated Li4Ti5O12 anode materials for Lithium Ion Batteries

Preparation and electrochemical properties of carbon-coated Li4Ti5O12 anode materials for Lithium Ion Batteries

... the lithium storage performance of ...active material decreases as the rate increases ...the carbon layer has not coated the LTO particles continuously in the LTO/C-c material, which ... See full document

11

Application of Electrospun Carbon Nanofibers as Sodium-ion Battery Anode Materials.

Application of Electrospun Carbon Nanofibers as Sodium-ion Battery Anode Materials.

... in lithium-ion battery system, but SEI in sodium-ion battery system is different and more progress is still ...in lithium-ion batteries due to the high soluble SEI ... See full document

222

Coiled Spring-Like Hard Carbon as an Anode Material for Lithium-ion Batteries

Coiled Spring-Like Hard Carbon as an Anode Material for Lithium-ion Batteries

... as-prepared material, XRD was employed, as shown in ...CMC material, the (002) plane diffraction peak can also be found at ~24°, which represents a shift close to a lower angle, suggesting an increase in ... See full document

14

Fabrication of Hollow MgFe2O4 Microspheres for High Performance Anode of Lithium Ion Battery

Fabrication of Hollow MgFe2O4 Microspheres for High Performance Anode of Lithium Ion Battery

... density[6]. The poor rate and cycling stability leaves huge challenging for excellent anode materials. Construction of inorganic hollow microspheres materials have attracted growing interest over the years because ... See full document

11

A Facile Hydrothermal Synthesis of Ultrasmall Sn Nanoparticles in Carbon Matrices as Anode for Lithium Ion Battery

A Facile Hydrothermal Synthesis of Ultrasmall Sn Nanoparticles in Carbon Matrices as Anode for Lithium Ion Battery

... as carbon, is an attractive method to resolve the above ...the anode, and present abuffering effect to accommodate the volume expansion during lithiation-delithiation ... See full document

10

Separation of Co (II) and Li (I) using Saponified P507/n Hexanol/n Heptane Salting Out Agent Free Microemulsion

Separation of Co (II) and Li (I) using Saponified P507/n Hexanol/n Heptane Salting Out Agent Free Microemulsion

... P507 was from Fengxing Chemical Reagent Jiangxi Corp. (Jiangxi, China) and used without any further purification. N-heptane and n-hexanol (both A.R.) are from Fuchen Chemical Reagent Tianjin Corp. (Tianjin, China). ... See full document

6

Metal Sulfides as Anode for Lithium Ion and Sodium Ion Battery

Metal Sulfides as Anode for Lithium Ion and Sodium Ion Battery

... advanced Lithium-ion battery has received significant attention for the last two decades due to the high energy density of lithium, high battery capacity which is successfully taken ... See full document

147

Show all 10000 documents...