1.6. Switching Switching the the System System On On and and Off Off
4.1.4. System System Technique/Pro Technique/Process cess Technique Technique
4.1.4. System System Technique/Pro Technique/Process cess Technique Technique
The system-technical and the process-technical parameter
The system-technical and the process-technical parameters are set in the TOOLBOX II s are set in the TOOLBOX II withwith the tool "OPM II".
the tool "OPM II".
The information concerning the operation can be found in the
The information concerning the operation can be found in theTOOLBOX II User Manual,TOOLBOX II User Manual, chapter "OPM II"
chapter "OPM II" ..
The description of
The description of the system-technical and process-technicthe system-technical and process-technical functions can be al functions can be found in thefound in the TM 1703 mic CP-60xx/CPC60 System Manual,
TM 1703 mic CP-60xx/CPC60 System Manual, chapter "Telecontrol" chapter "Telecontrol" ..
4.1.4.1.
4.1.4.1. System-technical System-technical Settings Settings
The parameter setting is carried out in the plant tree of the window S
The parameter setting is carried out in the plant tree of the window SYSTEM TECHNIQUEYSTEM TECHNIQUE, under , under the selected basic system element:
the selected basic system element:
•
• Common settings of the system elementsCommon settings of the system elements
•
• TopologyTopology
•
• Time managementTime management
•
• Data Flow Data Flow
•
• Communication (protocol)Communication (protocol) Under the level of the Ax
Under the level of the Ax peripheral bus, the configured peripheral elements with the process-peripheral bus, the configured peripheral elements with the process-technical signals, which have been set in the windo
technical signals, which have been set in the windo w Ew EDITDITIIMAGEMAGE, are displayed:, are displayed:
•
• Hardware pinsHardware pins
•
• Software data pointsSoftware data points
By means of the context menu of a hardware pin,
By means of the context menu of a hardware pin, function Efunction EDIT IMAGEDIT IMAGE, one directly reaches the, one directly reaches the process-technical parameter setting.
process-technical parameter setting.
4.1.4.2.
4.1.4.2. Process-technical Process-technical Settings Settings
The definition of
The definition of process-technicaprocess-technical signals (I/Os) and l signals (I/Os) and their parameters for the technologicaltheir parameters for the technological processing takes place in the plant tree of the window E
processing takes place in the plant tree of the window EDITDITIIMAGEMAGE, below the selected station:, below the selected station:
•
• AddressingAddressing
•
• Preprocessing of signalsPreprocessing of signals
•
• Postprocessing of signalsPostprocessing of signals The description of the
The description of the technological processing of inputs and outputs (process peripheral sig-technological processing of inputs and outputs (process peripheral sig-nals) can be found in the manual
nals) can be found in the manualTM 1703 mic CP-60xx System Manual, chapter TM 1703 mic CP-60xx System Manual, chapter "Telecon- "Telecon-trol", section "Process Periphery"
trol", section "Process Periphery" ..
The description of the parameters can be found in the
The description of the parameters can be found in theTOOLBOX II User Manual, chapter "Pa-TOOLBOX II User Manual, chapter "Pa-rameter Documentation"
rameter Documentation" ..
4.1.4.3.
4.1.4.3. Configuration Configuration of of the the Communication Communication Protocol Protocol
The protocol is determined by configuring a protocol element suitable for the existing The protocol is determined by configuring a protocol element suitable for the existing applica-tion and its parameter setting.
tion and its parameter setting.
4.1.4.4.
4.1.4.4. Transform Transform Parameters Parameters
Before loading into th
Before loading into th e target system, the set parameters of e target system, the set parameters of the process-technical plant mustthe process-technical plant must be transformed. This is carried out with the tool "OPM II" through selection of the function be transformed. This is carried out with the tool "OPM II" through selection of the function D
DESTINATION SYSTEMSESTINATION SYSTEMS| SICAM 1703… | SICAM 1703 T| SICAM 1703… | SICAM 1703 TRANSFORMERRANSFORMER..
System-technical parameters are automatically transformed when saved.
System-technical parameters are automatically transformed when saved.
4.1.4.5.
4.1.4.5. Upload Upload Parameters Parameters
The loading of the pa
The loading of the parameters of a process-technicrameters of a process-technical plant from PC to the target system takesal plant from PC to the target system takes place with the tool "OPM II"
place with the tool "OPM II" via the context menu of the automation unit (right mouse button,via the context menu of the automation unit (right mouse button, P
P ARAMETER ARAMETER||LOADINGLOADING).).
All parameter settings, that have been perform
All parameter settings, that have been performed in the TOOLBOX II, are thereby stored to-ed in the TOOLBOX II, are thereby stored to-gether on the SIM card in the master control element:
gether on the SIM card in the master control element:
•
• Configuration parametersConfiguration parameters
•
• System parametersSystem parameters
•
• Process-technicProcess-technical parameters (if al parameters (if previously parameters have been previously parameters have been transformed)transformed)
•
• Application program (if previously Code has been generated)Application program (if previously Code has been generated) After the loading of the parameters a startup of t
After the loading of the parameters a startup of the target system is performhe target system is performed automatically.ed automatically.
In the error output window
In the error output window of the "OPM II" the displayof the "OPM II" the displayParameters are loaded and upParameters are loaded and up to date
to dateappears subsequently.appears subsequently.
For the loading of the parameters there are different variants available. The details thereto can For the loading of the parameters there are different variants available. The details thereto can be found in the
be found in theTOOLBOX II User Manual, chapter "Parameter Loader" TOOLBOX II User Manual, chapter "Parameter Loader" ..
Caution Caution
During a loading operation, the switching off of
During a loading operation, the switching off of the master control element is to be absolutely avoided,the master control element is to be absolutely avoided, since the data on the SIM card could be destroyed as a result.
since the data on the SIM card could be destroyed as a result.
4.1.4.6.
4.1.4.6. Parameter Parameter comparison comparison
With the parameter comparison function it can be ascertained whe
With the parameter comparison function it can be ascertained whe ther the parameter status inther the parameter status in the destination system is current. The comparison can be started with the tool "OPM II" via the the destination system is current. The comparison can be started with the tool "OPM II" via the context menu of the automation unit (right mouse button, P
context menu of the automation unit (right mouse button, P ARAMETER ARAMETER| C| COMPARISONOMPARISON).).
In the error output window
In the error output window of the "OPM II"appears the display whether the pof the "OPM II"appears the display whether the p arameters of thearameters of the selected automation unit are current or not current.
selected automation unit are current or not current.
4.1.5. Documentation 4.1.5. Documentation
The documentation of all engineering data of a
The documentation of all engineering data of a TM 1703 mic system is created with the helpTM 1703 mic system is created with the help of the TOOLBOX II.
of the TOOLBOX II.
4.1.5.1.
4.1.5.1. HW HW Configuration Configuration
The documentation of the automation unit slots occupied with system elements can be The documentation of the automation unit slots occupied with system elements can be cre-ated with the tool
ated with the tool "HW-"HW-FW conFW configuration". The output takes place optionally as preview on figuration". The output takes place optionally as preview on thethe screen or to a printer.
screen or to a printer.
4.1.5.2.
4.1.5.2. Assembly Assembly Technique Technique
With the tool "Assembly-technical Documentation" the assignment of all hardware pins With the tool "Assembly-technical Documentation" the assignment of all hardware pins withinwithin an assembly-technical plant can be documented. The output takes place to a file as table an assembly-technical plant can be documented. The output takes place to a file as table (format
(formatcsvcsv).).
Selection options:
Selection options:
•
• All automation unitsAll automation units
•
• Selected automation unitsSelected automation units
•
• All system elements of an automation unitAll system elements of an automation unit Selected system elements of an automation unit Selected system elements of an automation unit The following information is displayed:
The following information is displayed:
•
• Physical structure of the system elementPhysical structure of the system element
•
• System-technical address of each pin within System-technical address of each pin within a messagea message
•
• Process-technical address of each pin within a Process-technical address of each pin within a messagemessage
•
• General information about a pin (long text)General information about a pin (long text) Assignment of the pin to a link imag
Assignment of the pin to a link image in e in "OPM II""OPM II"
The details thereto can be found in the
The details thereto can be found in theTOOLBOX II User Manual, TOOLBOX II User Manual, chapter “Engineering Man-chapter “Engineering Man-ager EM II”, section
ager EM II”, section "Assembly Techniq"Assembly Technique Documentation" ue Documentation" ..
4.1.5.3.
4.1.5.3. Interface Interface to to Elcad Elcad
For the coupling with the design tool ELCAD,
For the coupling with the design tool ELCAD, it is possible to transfer images that are attachedit is possible to transfer images that are attached to a TM 1703 mic system element via this defined interface. The output ta
to a TM 1703 mic system element via this defined interface. The output ta kes place to a textkes place to a text file (format
file (formatascasc).).
The generation of the file takes place with
The generation of the file takes place with the tool "OPM II" via selection of the functionthe tool "OPM II" via selection of the function D
DESTINATION SYSTEMSESTINATION SYSTEMS| SICAM 1703… | SICAM 1703 T| SICAM 1703… | SICAM 1703 TRANSFORMERRANSFORMER..
The details thereto can be found in the
The details thereto can be found in theTOOLBOX II User Manual, TOOLBOX II User Manual, chapter "OPM II", sectionchapter "OPM II", section
"Elcad"
"Elcad" ..
4.1.5.4.
4.1.5.4. Telecontrol Telecontrol Function Function
The documentation of the
The documentation of the system-technical and process-tecsystem-technical and process-technical parameters can be createdhnical parameters can be created with the tool "OPM II". The output takes place optionally as preview on the screen or to a with the tool "OPM II". The output takes place optionally as preview on the screen or to a
printer.
printer.
•
• System-technical parametersSystem-technical parameters ─
─ Window SWindow SYSTEM TECHNIQUEYSTEM TECHNIQUE::
Documentation of a selected automation unit or a system element.
Documentation of a selected automation unit or a system element.
•
• Process-technicProcess-technical al parametersparameters ─
─ Window EWindow EDITDITIIMAGEMAGE::
Documentation of a selected hierarchical level.
Documentation of a selected hierarchical level.
─
─ Window BWindow BULK EDITULK EDIT::
Documentation of the
Documentation of the current content (process-technical addresses and parameters).current content (process-technical addresses and parameters).
The details thereto can be found in th
The details thereto can be found in th eeTOOLBOX II User Manual, chapter TOOLBOX II User Manual, chapter "OPM II", section"OPM II", section
"General", section "Documentation"
"General", section "Documentation" ..
4.1.6.
4.1.6. Test Test Functions Functions
Note Note
The online test functions provided by the
The online test functions provided by the TOOLBOX II are not supported for TM 1703 TOOLBOX II are not supported for TM 1703 mic. Online testmic. Online test functions are only available via a webbrowser.
functions are only available via a webbrowser.