OPTIONAL FEATURES
1.
Mobile Trailer Units
The MacGen range of generator units are available on mobile road-tow chassis up to 200kVA. Fully galvanised and constructed from folded steel, these units provide much needed portability where necessary. Supplied with all electrical lights and connections and a choice of towing hitches, the mobile generator is ready to move whenever it is needed, supplying reliable power in the most flexible way. Weight restrictions may apply.
2.
Auto Start Packages
The AMF/ATS panel is used to monitor a mains supply and automatically start the standby generator in the event of a mains power failure. The module also provides indication of operational status and fault conditions, automatically shutting down the generator and indicating failures by means of the LCD display and appropriate flashing LED on the front panel. Selected timers and alarms can be altered by the customer from the front panel. The interface also provides real time diagnostic facilities. Synchronizing options also available.
3.
3-Way Fuel Valve Kits
This kit enables the user to select a fuel source either from the generators own internal bunded tank or an appropriate external tank via the valve. The kit is also supplied with non-return, quick-release fittings available in either 1/2”, 3/8” or 1/4” sizes.
4.
Water Fuel Pre-Filter
Due to different fuel qualities or possible condensation build up in large external storage tanks a certain amount of water can occur in the fuel system. The water fuel pre-filter separates this water from the diesel in order to avoid the water damaging the injection system and engine.
5.
distribution Boxes
Distribution boxes are available on all soundproof generators, excluding the MPG13 model, with a large and varied range of socket configurations from 16amp to 125amp.
1
2
3
4
6.
high Capacity Fuel Tank
This steel-bunded, high-capacity fuel tank significantly increases the fuel capacity of the generator over the standard version. These tanks are available for the complete soundproof range. Sizes available from 100 to 3960 litres (model dependant).
7.
Electronic Governor
The electronic governor regulates the generator’s engine speed. Due to its rapid response to load demand changes, it can maintain the generator's output frequency much more efficiently, especially when working within narrow limits such as computer hardware or electronic plant equipment.
8.
Lift and drag Skids
The lift and drag skids are designed to allow the user more flexibility when positioning the generator on site. In addition to the lifting hook and fork truck pockets, the drag skid allows the unit to be pulled into position. It also protects the chassis and canopy from damage caused by small machinery as the base protrudes outwards from the main canopy frame.
9.
Battery Trickle Charger
After prolonged period of inactivity batteries can discharge. The battery trickle charger prevents this discharge from occuring by keeping the batteries charged to their maximum capacity. When maximum capacity is achieved, the battery trickle charger switches off until it is next required (external power source required).
10.
Switchable dual Frequency
The MacGen generator range is supplied with 50Hz as standard. However they can be reconfigured to provide both 50 and 60Hz through a combination of adjustments to the MacGen CEM controller and the engine.
6
7
8
9
10
• Programmable Timer: The programmable timer informs the controller about the current date and time which in turn allows the weekly programming of
events such as programmed start and stop, programmed blocking, failure data log, energy counters (day, month, year).
• Marine Alternator: This additional protective coating can be added to the main alternator to protect it from the harshest environments.
• Battery Isolator: The battery isolator is normally located within the engine compartment of the generator its primary purpose being to isolate all power
from the batteries to the controller.
• Water Jacket Heater: This thermostatically controlled unit warms the engine coolant allowing the generator to start and accept load quicker. • Low Water Level Sensor: This unit will automatically shutdown the engine when the coolant level reaches its minimum mark.
• Customised Color: The complete range of generators can be customised to meet any bespoke company branding and aesthetics.
COMMUNICATIONS OPTIONS
|
FOR OFFSITE MONITORING AND MANAGEMENT
1. Repetitive Visualisation Display
This remote display acts as a second viewer allowing the user to monitor and control the generator via a hard wire connection up to 1km.
2. MPS5.0 Synchronising Control System
The MPS5 module allows up to 8 generators to be linked together for the purpose of synchronization and load sharing.
3. CAN-BUS monitoring
This option allows the user full control and monitoring of the generator from a PC via CAN-USB connection up to 1km away (achieved through hard wire connection).
4. CAN-LAN monitoring
Similar to the CAN-BUS system but connection is made via Ethernet, which allows any PC connected to the same network to control and monitor the generator.
5. GSM Modem Remote Monitoring
Allows the user full control and monitoring of the generator from a PC connected to a GSM/Cellphone network, it can also send an SMS text alert informing start/stop of the generator to a mobile phone.*
6. Internet Remote Monitoring
This option allows the user full control and monitoring of the generator from a PC connected to the internet.*
1
* ADDITIONAL 3RD PARTY INTERNET OR MOBILE CHARGES WILL APPLY
34!24 34/0 2%3%4 $)%3%, 42!.3& !54/ 34!24 34/0 2%3%4 $)%3%, 42!.3& !54/
2
3
6
5
4
COMMUNICATIONS OPTIONS
|
FOR OFFSITE MONITORING AND MANAGEMENT
1. Repetitive Visualisation Display
This remote display acts as a second viewer allowing the user to monitor and control the generator via a hard wire connection up to 1km.
2. MPS5.0 Synchronising Control System
The MPS5 module allows up to 8 generators to be linked together for the purpose of synchronization and load sharing.
3. CAN-BUS monitoring
This option allows the user full control and monitoring of the generator from a PC via CAN-USB connection up to 1km away (achieved through hard wire connection).
4. CAN-LAN monitoring
Similar to the CAN-BUS system but connection is made via Ethernet, which allows any PC connected to the same network to control and monitor the generator.
5. GSM Modem Remote Monitoring
Allows the user full control and monitoring of the generator from a PC connected to a GSM/Cellphone network, it can also send an SMS text alert informing start/stop of the generator to a mobile phone.*
6. Internet Remote Monitoring
This option allows the user full control and monitoring of the generator from a PC connected to the internet.*
1
* ADDITIONAL 3RD PARTY INTERNET OR MOBILE CHARGES WILL APPLY
34!24 34/0 2%3%4 $)%3%, 42!.3& !54/ 34!24 34/0 2%3%4 $)%3%, 42!.3& !54/
