finite element structural model
Analysis of Vibration and Sound Radiation Characteristics of Resilient Wheel in Metro
... analysis model of metro vehicle was established by using UM software and was researched by numerical calculation method, the wheel-rail contact force under irregularity excitation was ...calculation model ...
9
A simplified finite element model for assessing steel fibre reinforced concrete structural performance
... the model assumes elastic behaviour in compression (mainly for numerical stability purposes), this does not seem to affect accuracy as the predictions obtained concerning certain important aspects of ...
36
Seismic Response of the ACR(TM) Reactor Building
... stick model that captures both mass and stiffness characteristics of the reactor ...3D finite element model that captures areas of irregularities and stress concentration is used in the ...
8
Structural and Contact Analysis of Disc Brake Assembly during Single Stop Braking Event
... thermal model and finite element based techniques to provide a reliable method to calculate the temperature rise, thermal stress and distortion under a given brake ...MSC/Marc finite ...
8
Seismic Damage Assessment of Reinforced Concrete Containment Structures (K565)
... shell finite element using layered approach and appropriate inelastic material ...at element and structural ...tendon model, the special PSC shell element improves the reinforced ...
6
Sensor Placement based on FE Modal Analysis: Dynamic Characteristic of Cable Stayed Penang (I) Bridge
... mathematical model is provided by the Malaysian highway authority as depicted in Figure 3 ...3D Finite element model was tuned manually to reduce the errors and discrepancy of modelling ...
7
A New Model Updating Method for Quadratic Eigenvalue Problems
... finite element model (1.2) for structural dynamics, the analytical mass and stiffness matrices are, in general, clearly defined by physical parameters and evaluated by static ...finite element ...
6
Fracture Energy and Size Effect Studies for Nuclear Concrete Structures
... the structural size ...of structural size effect remains an enigma as the results obtained from such model and specimen tests cannot be directly used for predicting the inelastic and fracture ...
10
Calculation of the Stress Intensity Factor in an Inclusion Containing Matrix
... micromechanical model, based on the FEA (finite element analysis) of the behavior of cracks initiated at micro structural features such as inclusions, has been developed using LEFM (Linear ...
12
Analytical and Experimental Investigation of I Beam-to-CFT Column Connections under Monotonic Loading (RESEARCH NOTE)
... of structural joints is of utmost importance for designing partial strength joints in combination with a plastic global analysis or under seismic ...finite element program ABAQUS compared against ...
14
The impact of temperature on wave interaction with damage in composite structures
... of structural damage has been an extensive field of study over the recent ...analytical finite element (SAFE) model is developed in [18] to predict guided wave response under varying ...
38
Research on establishing numerical model of geo material based on CT image analysis
... meso-structural finite element models, such as lattice model, beam-particle model, random aggregate model, and random mechanical properties model ...the model has ...
11
Numerical Simulation of Vibration and Structural Born Noise Analysis of Industrial Gearbox
... using Finite Element Analysis ...and Structural born noise calculation for a single stage helical gearbox casing by employing Finite Element ...3D model of gearbox was prepared ...
7
Earthquake Response Analysis of NPP Buildings with Reactor WWER 440 Including Site Effects
... Establish soil model, properties, and layer boundaries to be used for the foundation, Perform SSI analysis in one or two steps, using structural finite element models... The lower b[r] ...
8
Loading Estimation of Flapping Wings under Aeroelastic Effect Using Finite Element Method
... a finite element model based on BFS element was established to simulate the structural dynamic behavior of flapping ...aerodynamic model. To validate the structural ...
12
Finite element model of a double-stage helical gear reduction.
... ANSYS model was built using BEAM188, MASS21, COMBIN14, and MATRIX27 ...beam element for 3D analysis. MASS21 is a structural mass point element also suitable for 3D ...per element w ith ...
117
Preface: Oceanographic processes on the continental shelf: observations and modeling
... There are, of course, several other interesting aspects that should be encompassed when dealing with coupled numeri- cal models (Carniel et al., 2016b). In this special issue, Olita et al. (2015) study the impact of ...
7
Finite Element Analysis Of Bridge Cranes’ Proof Load Test Data
... the Element Nodal Variable Function; c) setting up Element Derivatives and constitutive Relationships; d) deriving the stiffness matrix: i) Direct equilibrium method, ii) work or energy method, iii) ...
16
Quasi-Static and Dynamic Behaviors of Helical Gear System with Manufacturing Errors
... global finite element model and a par- tial finite element model are used to obtain the global flexibility matrix of potential contact points in the same engagement position ...
9
Structural Analysis Of Tig Welded Joints Of Inconel 718 Using Ansys
... Finite element analysis was first developed for the use of aerospace and nuclear industries where the safety of structure is ...commercial finite element packages exist that can solve the most ...
7