• No results found

Light-emitting devices

High Performance Polymer Light Emitting Devices

High Performance Polymer Light Emitting Devices

... polymer light-emitting devices, driving voltages, current efficiency, luminance and power efficiency of different cathode metals such as Ca/Al, CsF/Al, LiF/Al and LiF/Ca/Ag were ...polymer ...

5

Device Fabrication and Properties of quantum-dot Light-emitting devices

Device Fabrication and Properties of quantum-dot Light-emitting devices

... (light-emitting devices) and lasers form an integral part of optical transceivers but silicon-based light sources have remained one of the main challenges for silicon photonics as silicon is a ...

5

Solution Processed Hybrid Light Emitting Devices Comprising TiO2 Nanorods and WO3 Layers as Carrier Transporting Layers

Solution Processed Hybrid Light Emitting Devices Comprising TiO2 Nanorods and WO3 Layers as Carrier Transporting Layers

... of devices were performed with a JEOL 6700 F ...of light-emitting devices were measured using an Agilent 4155C semiconductor analyzer and a calibrated silicon ...

9

The Effect of Electrode Materials on the Optical Characteristics of Infrared Quantum Dot-Light Emitting Devices

The Effect of Electrode Materials on the Optical Characteristics of Infrared Quantum Dot-Light Emitting Devices

... dot light emitting devices (IR QD- ...the light outcoupling efficiency of IR QD-LEDs based on SWCNT as anode was increased nearly by a factor of 4 relative to that one based on indium-tin ...

13

Electromagnetic Modeling of Outcoupling Efficiency and Light Emission in Near-Infrared Quantum Dot Light Emitting Devices

Electromagnetic Modeling of Outcoupling Efficiency and Light Emission in Near-Infrared Quantum Dot Light Emitting Devices

... Dot-light emitting devices ...emitted light can be classified into the following modes: Substrate, indium tin oxide (ITO)/organic waveguided, surface plasmonic modes, and external emitted ...

21

Erbium and Silicon Nanocrystals based Light Emitting Devices for lightwave circuits

Erbium and Silicon Nanocrystals based Light Emitting Devices for lightwave circuits

... based light emitting devices have been fabricated and such devices can reach efficiency up to ...(IR) devices, because the work done in this thesis will be focalized on both of these ...

168

Electroluminescent Characteristics of DBPPV–ZnO Nanocomposite Polymer Light Emitting Devices

Electroluminescent Characteristics of DBPPV–ZnO Nanocomposite Polymer Light Emitting Devices

... polymer light emitting devices with metal Zinc Oxide (ZnO) nanoparticles and 2,3-dibutoxy-1,4-poly(phenylenevinylene) ...of devices with ZnO nanoparticles are much better than those of device ...

6

Silicon Nanocrystal Based Light Emitting Devices for Silicon Photonics

Silicon Nanocrystal Based Light Emitting Devices for Silicon Photonics

... Traditional light emitting diodes (LEDs) work by injecting minority charge carriers into complementarily doped regions across the depletion width of a semiconductor pn-junction in forward ...pumped ...

139

Diffusion-Driven Charge Transport in Light Emitting Devices

Diffusion-Driven Charge Transport in Light Emitting Devices

... area light emitters for electroluminescent cooling devices such as thermophotonic heat pumps ...injected light emitting diode (DILED) [38–40] and surface InGaN QW located on top of gallium ...

15

Comparative Investigation on Structural and Optical Properties of a Yellow-Emitting Zn 3(Vo4)2: Ce3+ Phosphor for Applications in White Light Emitting Devices

Comparative Investigation on Structural and Optical Properties of a Yellow-Emitting Zn 3(Vo4)2: Ce3+ Phosphor for Applications in White Light Emitting Devices

... white light emitting diodes (wLEDs) is expanding ...white light can be generated by combining a blue-emitting Indium Galium Nitride (InGaN) chip witha yellow-emitting ...

100

Development and Integration of Stretchable Electronic Components into Light-Emitting Devices

Development and Integration of Stretchable Electronic Components into Light-Emitting Devices

... Figure 1. Seven categories of additive manufacturing processes: (a) Material Extrusion [9], (b) Powder Bed Fusion [10], (c) Vat Photo Polymerization [11], (d) Binder Jetting [12], (e) Material Jetting [13], (f) Sheet ...

177

Electrospray deposition of polymer thin films for organic light emitting diodes

Electrospray deposition of polymer thin films for organic light emitting diodes

... organic light-emitting devices [OLEDs] due to their potential applicability to flat panel displays and solid-state lighting ...5-in. devices have been commercialized ...

7

White light emitting diode based on purely organic fluorescent to modern thermally activated delayed fluorescence (TADF) and perovskite materials

White light emitting diode based on purely organic fluorescent to modern thermally activated delayed fluorescence (TADF) and perovskite materials

... organic/polymer light emitting diode (WOLED/WPLED) processed from solution has attracted significant research interest in recent years due to their low device production cost, device flexibility, easy ...

28

Investigation of temperature regime and luminous flux of light emitting 
		element of light emitting diode lamp

Investigation of temperature regime and luminous flux of light emitting element of light emitting diode lamp

... stripe-patterned light emitting ...the light output ...°C) light output makes 85–90% of the value at a temperature of ...of light emitting diodes does not give a noticeable ...

5

New high intensity fibreoptic phototherapy devices in healthy newborns: a single pad wrapped around the neonate body in comparison with a double pad device

New high intensity fibreoptic phototherapy devices in healthy newborns: a single pad wrapped around the neonate body in comparison with a double pad device

... (FPT) devices, equipped with a pad placed directly in contact with the infant skin, allow to lower total serum bilirubin (TSB) levels in healthy neonates maintained in rooming-in with their mothers, avoiding ...

5

DESIGNING OF LIGHT EMITTING DIODE

DESIGNING OF LIGHT EMITTING DIODE

... When p-n junction in forward biased with a voltage greater than 1.5V,electron –hole recombination takes place. During recombination process, the electron release energy in the form of light show in figure (a).In ...

5

Mid infrared GaSb based resonant tunneling diode photodetectors for gas sensing applications

Mid infrared GaSb based resonant tunneling diode photodetectors for gas sensing applications

... 2330 nm, and 3395 nm respectively) in this spectral window. 14 In recent years, research covering this spectral range was driven by both, the emitter and detector part. For tunable laser absorption spectroscopy, single ...

12

Solvent immersion nanoimprint lithography of fluorescent conjugated polymers

Solvent immersion nanoimprint lithography of fluorescent conjugated polymers

... the light emitting film on a nanostructured ...the emitting material can take advantage of the greater refractive index contrast between the polymer (n ...

6

GROWTH AND CHARACTERIZATION OF TRANSITION METAL DOPED CDS NANOSTRUCTURES FOR BLUE, CYAN AND GREEN LIGHT EMISSION

GROWTH AND CHARACTERIZATION OF TRANSITION METAL DOPED CDS NANOSTRUCTURES FOR BLUE, CYAN AND GREEN LIGHT EMISSION

... The nanostructures of CdS have been prepared by Green Chemical Synthesis method by using Starch as a green capping agent. Transition metal Copper was doped for emission of visible wavelengths of light for ...

7

Effects of Light Emitting Diode  in Erythrocytes

Effects of Light Emitting Diode in Erythrocytes

... The increased presence of hemolysis favored the investigation of specific concentration of hemoglobin that have absorption peaks between 415 - 630 nm. However, there are no reports that the LED 515 - 570 nm, green ...

7

Show all 10000 documents...

Related subjects