low density polyethylene
Studies of acute and subchronic systemic toxicity associated with a copper/low-density polyethylene nanocomposite intrauterine device
... This study, a logical extension of our previous work, aimed to investigate the safety of a novel contraceptive device, the copper/low-density polyethylene nanocomposite intrauterine de[r] ...
14
Melt Rheology of Poly(Lactic Acid)/Low Density Polyethylene Polymer Blends
... In this work, rheological properties of poly(lactic acid) (PLA), low density polyethylene (LDPE) polymer blends were investigated in the molten state. The experiments were carried on a capillary ...
7
9. Study of Physico-Mechanical Properties of Recycled Low Density Polyethylene/Sisal Fiber Composite
... Recycled Low Density Polyethylene and the treatedsisalcomposites were formedusing two roll mill with model ...recycled Low Density Polyethylene was introduced to the two roll ...
8
Low-loss ARROW waveguide with rectangular hollow core and rectangular low-density polyethylene/air reflectors for terahertz waves
... mode using realistic values of refractive index at 1 THz operating frequency. The structure employs rectangular hollow-core and low-density polyethylene/air anti-resonant reflecting bilayers, which ...
17
Minimal Conditions to Degrade Low Density Polyethylene by Aspergillus terreus and niger
... Plastics pollution is a major worldwide concern because there is strong evidence about marine influence on the human trophic chain. Thus, we experimented with the biodegradation of low density ...
8
Compatibility And Degradability Of Kenaf-Filled Linear Low Density Polyethylene Polyvinyl Alcohol Composites
... Linear low-density polyethylene/poly (vinyl alcohol)/kenaf bast fiber (LLDPE/PVOH/KNF) composites: effect of lysine. 4.7.1[r] ...
24
The performance of mengkuang leaf fiber reinforced low density polyethylene composites
... reinforced low density polyethylene (LDPE) composites with different fiber volume and different mesh sizes were ...composites; polyethylene; ...
11
Conversion of Hospital Low Density Polyethylene Waste into Hydrocarbons Using Fly Ash as Catalyst
... Hydrocarbons have been obtained from waste saline bottles, made of low density polyethylene (LDPE), by degradation using fly ash as catalyst. When cat/pol ratio was 0.1 97% degradation was observed ...
11
Thermo-Oxidation and Biodegradation Study of Low-Density Polyethylene /Starch Films by IR Spectroscopy
... of low-density polyethylene/starch films (LDPE/starch) by infrared spectroscopy: Films of LDPE/Starch blends of different composition (starch content range from 0 to 15% w/w), were prepared and ...
10
ac aging and space charge characteristics in low density polyethylene polymeric insulation
... in low-density polyethylene 共 LDPE 兲 ...and polyethylene loaded with carbon black, it was found that the electrode has an important role in the formation of charge, hence subsequent changes ...
7
Analysis of Effects of High Density and Low Density Polyethylene Wastes on Bitumen for Highway Construction
... compare the effects of waste plastics namely High-density polyethylene (HDPE) and Low-density polyethylene (LDPE) in base bitumen. For this purpose, four modified bitumen with polymer ...
5
The effect of gamma irradiation on space charge behaviour and dielectric spectroscopy of low-density polyethylene
... as low density polyethylene (LDPE), these traps are thought to be “cavity” defect traps in the amorphous region and defects at the crystalline ...
5
The influence of oxidation on space charge formation in gamma irradiated low density polyethylene
... irradiated low-density polyethylene after being electrically stressed under dc ...voltage. Polyethylene plaques both with and without antioxidant were irradiated upto 500 kGy using a 60 Co ...
9
A Study on Recycling Of Crumb Rubber and Low Density Polyethylene Blend on Stone Matrix Asphalt
... Abstract- Stone Matrix Asphalt (SMA) is hot mixture asphalt consisting of a coarse aggregate skeleton and a higher binder content mortar. To minimize the pollution from waste tires and to improve the properties of SMA, ...
16
Predictions of Storage Modulus of Glass Bead Filled Low Density Polyethylene Composites
... The focus of this paper is to investigate the factors af- fecting the storage moduli of polymer composites filled with inorganic particles, and to propose a quantitative characterization based on the previous work stated ...
7
Transport Characteristics of Benzene through Palm Mesocarp Fibre/Low Density Polyethylene Composites
... Abstract - The transport characteristics of benzene through palm mesocarp fibre (PMF)-reinforced low density polyethylene (LDPE) composites have been studied in the temperature range 40–80 °C. The ...
14
Comparative Study for Melt Flow Index of High Density Polyethylene, Low Density Polyethylene and Linear Low Density Polyethylene
... of polyethylene were study; high density polyethylene (HDPE), linear low density polyethylene (LLDPE) and low density polyethylene ...different ...
8
Effect of Elevated Temperature on Mechanical Properties of Waste Polymers Polyethylene Terephthalate and Low Density Polyethylene Filled Normal Concrete Blocks
... waste low density polyethylene aggregates which were used as partial replacement of sand in the production of concrete blocks ...where low temperature and minimal load bearing applications are ...
8
Oxygen-barrier films based on low-density polyethylene/ ethylene vinyl alcohol/ polyethylene-grafted maleic anhydride compatibilizer
... I n this research, high oxygen-barrier films were organized based on low-density polyethylene (LDPE)/ ethylene vinyl alcohol (EVOH)/ polyethylene-grafted maleic anhydride (LDPE-g-MA) ...
11
Optimization of Injection Moulding Process Parameters in the Moulding of Low Density Polyethylene (LDPE)
... Abstract:- Injection moulding is one of the most popular polymer processing methods due to its high production rate as well as its ability to produce very intricate geometries at very cheaper cost and within few seconds. ...
5