mechanical finite element results
A PARAMETRIC STUDY OF WINDTURBINE SPARCAP IN BASALT FIBER USING FINITE ELEMENT ANALYSIS
... the mechanical properties of glass/ basalt fibre composite materials with experiments and the Finite Element Method (FEM) and The results showed that the glass/hybrid structure composite with ...
8
Characterization and Modeling of the Mechanical Behavior of Aeronautical Alloy Based Composite
... and mechanical behavior modeling of aeronautical alloy based composite to simulate tension test by finite element method and experimental ...numerical finite element simulation allowed ...
10
Mechanical characterization and finite element analysis of composite material
... Impact test results are summarized in the following table. The addition of the reinforcement into the epoxy increases the impact strength. SL-1 pendulum impact tester machine is used to carry out the impact test. ...
5
Analysis of air flow in the mouthguard design by using CFD approach
... dentistry, finite element analysis was used to stimulate the process of bone remodeling, to examine the internal pressure acting on the teeth, different type of dental material and to optimize the shape of ...
5
Finite Element Analysis of the Crankshaft Mechanical Strength of an 8L265 Diesel Engine
... Firstly, a 3-D model corresponding to practical conditions was set up by using Pro/E. Secondly it was imported into ANSYS-Workbench for meshing. Pre-treatment should been done on the imported model before mesh, such as: ...
5
Paper 03-2014-2
... 3D finite element mechanical cochlea model and 1D state–space electro–mechanical cochlea model show good matching with experimental measurements in terms of frequency ...The mechanical ...
9
Analysis of Electro-Mechanical Generator Casing by using Finite Element Method
... In this paper some significant aspects Electro-Mechanical system casing is discussed. Analysis is carried out on total casing and critical individual parts using Ansys 15 software, by using finite ...
6
Finite element analysis of mechanical properties for 2D woven Kenaf composite
... Finite element analysis and analytical methods are powerful tools for studying the mechanical properties of woven ...the mechanical properties. So, various finite element ...
36
Mechanical Performance and Finite Element Analysis of Bi-directional Barbed Sutures.
... In section 1.1, Problem Statement, it is explained that certain types of sutures and polymers, such as PDS II, Prolene, Ethilon and Maxon produce stiff barbs that stand out and mechanically engage the surrounding tissue, ...
126
Experimental and Numerical Studies on Composite Deck Slabs
... and finite element modelling of Composite deck slabs with and without ...slabs, mechanical interlocking in the form of embossments or shear connectors were used to transfer shear between the outer ...
11
Mechanical Properties of Kenaf Fiber Reinforced Composites Using Fem
... the finite element analysis of the natural fiber (Kenaf) composite material, processed by means of hand lay-up ...volume element using suitable assumption and analyzed by means of finite ...
5
Development of a Numerical Technique for Bus Rollover Test Simulation by the F.E.M.
... the results of the material strain rate, steel mechanical properties variation has been incorporated to the finite element calculation ...
5
Estimation of Stiffness Characteristics of LRB Bearings by Finite Element Analysis
... the finite element model of a lead rubber bearing (LRB) which is a typical base ...the mechanical characteristics of the rubber by strain energy function in order to develop a finite ...
10
Applied mechanics of the Puricelli osteotomy: a linear elastic analysis with the finite element method
... These results also suggest greater stability of bone segments and surgi- cal results provided by the diminished lever ...contact results in faster healing, decreased displacement due to muscle ...
7
INFLUENCE OF CERAMIC COATING ON PISTON SURFACE IN I.C ENGINE
... [7]. Telkar Mahesh1 Sunil Kumar2 V.Vinay3 P.Saisrikanth Goud4 have written a paper on “Temperature and Thermal Stress Analyses of a Ceramic-Coated Aluminium Alloy Piston in a Diesel Engine” IJSRD || National Conference ...
7
Steering design for a formula SAE-A open wheel race car
... It was decided to place the steering box just above the top chassis bars at the front of the vehicle. It would have been easier to get good geometry with it below the chassis rails but there was physically no room there ...
154
Interpreting finite element results for brittle materials in endodontic restorations
... Background: Finite element simulation has been used in last years for analysing the biomechanical performance of post-core restorations in endodontics, but results of these simulations have been ...
16
Recent advances in 3D printing of biomaterials
... They key advantage of SLS/SLM/EBM is the ability to directly make metallic implants that promote either bone ingrowth and regeneration for load-bearing applications in which high fracture toughness and mechanical ...
14
Finite Element Analysis and Topology Optimization Design for Front Platen of Injection Molding Machine
... Analysis of results. According to the result nephogram, it is found that the center hole in the back of platen has the maximum deformation, which is up to 0.130mm. The deformation is gradually decreased from ...
6
A Finite Element Thermo Mechanical Stress Analysis of IC Engine Piston
... In this section FE based stress analysis piston is carried out using ANSYS Workbench software. The ANSYS software is very important tool for the stress analysis, use to solve the problem related to the structure analysis ...
6