• No results found

microfluidic devices

Materials matter in microfluidic devices

Materials matter in microfluidic devices

... a microfluidic system, surface characteristics will have a profound influence on the activity of such components, which will subsequently influence their ...fabricate microfluidic devices and ...

5

Peptide Modified Microfluidic Devices for the Affinity Isolation of Circulating Tumor Cells.

Peptide Modified Microfluidic Devices for the Affinity Isolation of Circulating Tumor Cells.

... selection microfluidic devices utilize various microchannel geometries to optimize CTC ...of microfluidic geometry is critical to generate efficient recovery of rare cells while simultaneously ...

61

Lattice Boltzmann simulation of droplet behaviour in microfluidic devices

Lattice Boltzmann simulation of droplet behaviour in microfluidic devices

... We developed a lattice Boltzmann model to investigate the droplet dynamics in microfluidic devices. In our model, a stress-free boundary condition was proposed to conserve the total mass of flow system and ...

12

Particle separation in microfluidic devices - SPLITT fractionation and microfluidics

Particle separation in microfluidic devices - SPLITT fractionation and microfluidics

... Microfluidic devices are increasingly being used to separate particles in a wide range of biological and clinical analyses. This review paper focuses on field-flow fractionation (FFF) and split-flow-thin ...

22

Research Article Immobilization Techniques and Integrated Signal Enhancement for POC Nanocolor Microfluidic Devices

Research Article Immobilization Techniques and Integrated Signal Enhancement for POC Nanocolor Microfluidic Devices

... nanocolor microfluidic devices are new promising bioassay platforms, which employ nanoparticle- (NP-) protein conjugates for the immunodetection of medically relevant markers in biologic samples such as ...

11

Development of a Projection Stereolithography 3D Printing System for Rapid Prototyping of Microfluidic Devices

Development of a Projection Stereolithography 3D Printing System for Rapid Prototyping of Microfluidic Devices

... are devices which have been designed to carry out disease diagnostics in POC settings, with a precisely controllable microenvironment, and examine chemical and biological processes with a high level of precision ...

7

Development of multidimensional separations using microfluidic devices for proteomics applications

Development of multidimensional separations using microfluidic devices for proteomics applications

... Microfluidic devices provide a fundamentally different platform for performing chemical ...microfabricated devices, also known as Lab-on-a-Chip or Micro Total Analysis Systems, are characterized by a ...

170

Fabrication of integrated microfluidic devices for point of collection analysis of biological and environmental samples

Fabrication of integrated microfluidic devices for point of collection analysis of biological and environmental samples

... integrated devices where complementary functionality is realized using differences in material ...process, microfluidic devices can be fabricated containing (i) an optically transparent structure for ...

82

Biologically Inspired Electronic, Photovoltiac and Microfluidic Devices Based on Aqueous Soft Matter.

Biologically Inspired Electronic, Photovoltiac and Microfluidic Devices Based on Aqueous Soft Matter.

... the microfluidic channels can be easily formed in the hydrogel substrate by soft lithographic ...based microfluidic devices could find many potential applications, especially related to biological ...

170

An Investigation into the Use of Polymer Bound Boronic Acid for Glucose Detection in Paper Based Microfluidic Devices

An Investigation into the Use of Polymer Bound Boronic Acid for Glucose Detection in Paper Based Microfluidic Devices

... based microfluidic devices or microPADs (Figure ...are devices made out of paper or other porous membranes that are patterned with hydrophobic inks to produce networks of hydrophilic channels and ...

83

Micro milling of thin mould for continuous 
		productions of polymer microfluidic devices

Micro milling of thin mould for continuous productions of polymer microfluidic devices

... This paper reports an attempt to produce thin embossing mould by using micro-milling process and subsequently tested in fabricating polymer microfluidic devices using hot roller embossing process. Two ...

6

Planar microfluidic devices and selective detection in gas chromatography : techniques and applications

Planar microfluidic devices and selective detection in gas chromatography : techniques and applications

... planar microfluidic devices that hold promise to enable the techniques cited to be practiced in an efficient and reliable manner, further enhancing chromatographic ...Planar microfluidic systems ...

85

Nanoscale surface modifications to control capillary flow characteristics in PMMA microfluidic devices

Nanoscale surface modifications to control capillary flow characteristics in PMMA microfluidic devices

... polymer devices can be varied by plasma treatment [13-16] and the coating of diamond-like carbon (DLC) film [17,18] on the microchannel surfaces with numerous simulations describing the effects of surface ...

12

Microfluidic devices fabricated using fast wafer scale LED Lithography patterning

Microfluidic devices fabricated using fast wafer scale LED Lithography patterning

... of microfluidic devices, we have explored solu- tions to simplify the photolithography step by exploit- ing progress in solid-state LED sources operating in the UV ...

6

Integrated Microfluidic Devices for Cell Culture and Assay

Integrated Microfluidic Devices for Cell Culture and Assay

... In addition, this configuration mimics the in vivo interstitial environment as fast convective flow dominates the fluid delivery level that resembles blood flow in tissue and diffusion dominates the cell culture level ...

167

The study and characterisation of plasma microfluidic devices

The study and characterisation of plasma microfluidic devices

... Controlling the behaviour of atmospheric pressure plasmas and their interaction with polymeric materials is of major interest for surface modification applications across multidisciplinary fields intersecting biomedical ...

197

Analysis of liquid–liquid droplets fission and encapsulation in single/two layer microfluidic devices fabricated by xurographic method

Analysis of liquid–liquid droplets fission and encapsulation in single/two layer microfluidic devices fabricated by xurographic method

... layer microfluidic devices with flexibility in channel dimension for different purposes of droplet manipulation, ...hybrid devices such that a connection between different materials with fixed ...

17

Volumetric flow rate in simulations of microfluidic devices

Volumetric flow rate in simulations of microfluidic devices

... Abstract. In this work, we examine the volumetric flow rate of microfluidic devices. The volumetric flow rate is a parameter which is necessary to correctly set up a simulation of a real device and to check ...

8

Study on chemotaxis and chemokinesis of bone marrow-derived mesenchymal stem cells in hydrogel-based 3D microfluidic devices

Study on chemotaxis and chemokinesis of bone marrow-derived mesenchymal stem cells in hydrogel-based 3D microfluidic devices

... using microfluidic devices have greatly received attention enabling one to assay behav- iors of stem cells in a controlled microenvironment with spatiotemporal conditions of the ...

8

Optimization of Tetrapolar Impedance Electrodes in Microfluidic Devices for Point of Care Diagnostics using Finite Element Modeling

Optimization of Tetrapolar Impedance Electrodes in Microfluidic Devices for Point of Care Diagnostics using Finite Element Modeling

... Abstract— Electrophoresis is widely applied in the field of biochemistry and molecular biology. Tetrapolar electrical impedance sensing (TEIS) has been shown capable of replacing the conventional detection technology in ...

5

Show all 4048 documents...

Related subjects