• No results found

Numerical results on the IEEE 57-bus system

Prediction of Weakest Area and Line in IEEE 57 Bus System

Prediction of Weakest Area and Line in IEEE 57 Bus System

... ABSTRACT: This paper presents a method of finding weakest area and line in complex power system network which comprises of a 57 bus and 6 generator system (IEEE 57-bus ...

8

Computational Analysis of IEEE 57 Bus System Using N-R Method

Computational Analysis of IEEE 57 Bus System Using N-R Method

... From load flow study, we can ensure that bus voltage should be near to the rated values and the generation operates within real and reactive power limits. We can insure that transmission lines and transformers are ...

11

Power Flow Analysis of Simulink IEEE 57 Bus Test System Model using PSAT

Power Flow Analysis of Simulink IEEE 57 Bus Test System Model using PSAT

... an IEEE 57 bus test system model for conducting the power flow ...Power System Analysis Toolbox (PSAT) is used for designing the ...Simulink IEEE 57 bus test ...

9

Survey of Different Types of IEEE Bus System with FACTS Technology

Survey of Different Types of IEEE Bus System with FACTS Technology

... 1, 2 Control & Instrumentation Department, Rajasthan technical University, kota Abstract: Now-a-days the Flexible AC Transmission Systems (FACTS) is very popular and essential device in power systems. After introducing ...

5

Transient Stability Improvement of IEEE 14 Bus System with STATCOM

Transient Stability Improvement of IEEE 14 Bus System with STATCOM

... power system is always a difficult task, when the rapid expansion of the power system ...standard IEEE bus system using ...compensated system can be find out by simulation ...

5

TRANSIENT STABILITY ANALYSIS AND ENHANCEMENT OF IEEE- 9 BUS SYSTEM

TRANSIENT STABILITY ANALYSIS AND ENHANCEMENT OF IEEE- 9 BUS SYSTEM

... ABSTRACT System stability study is the important parameter of economic, reliable and secure power system planning and ...Power system studies are important during the planning and conceptual design ...

11

A New VSC HVDC model with IEEE 5 bus system

A New VSC HVDC model with IEEE 5 bus system

... IEEE5 bus system is proposed in this ...HVDC system is considered as the tap changing transformer because each converter is connection of voltage source converter and its ...IEEE5 bus ...

14

Congestion Management in IEEE Bus System Using GSA Optimization

Congestion Management in IEEE Bus System Using GSA Optimization

... A. IEEE-30 Bus System Used in GSA(gravitational search algorithm) Optimization Congestion management is necessary to tackle load demand in power ...The IEEE 30 bus system ...

6

Survey Paper on IEEE 14-bus System with FACTS Technology

Survey Paper on IEEE 14-bus System with FACTS Technology

... ABSTRACT: Now-a-days the Flexible AC Transmission Systems (FACTS) is very popular and essential device in power systems. After introducing the FACTS technology, power flow along the transmission lines becomes more ...

5

Optimal Placement of Statcom Using IEEE 5 Bus System   

Optimal Placement of Statcom Using IEEE 5 Bus System   

... neural system comprises of hubs known as neurons, at everything about the contributions from past layers are aggregated while being expanded with a few ...neural system has the ensuing fundamental ...the ...

6

Load Flow analysis & simulation on IEEE 30 bus system

Load Flow analysis & simulation on IEEE 30 bus system

... the system and voltage at different point in the system for evaluation and regulation of the performance of the power ...power system network, power system study is a signification tool for a ...

10

Transmission Pricing  in Deregulated Power System  for IEEE 30 bus

Transmission Pricing in Deregulated Power System for IEEE 30 bus

... transmission system is one of the basic topics to allow competition among participants in the energy ...of system participants’ bid behaviour and its effect on the systems ...the IEEE 30-bus ...

6

LINE FLOW ANALYSIS OF IEEE BUS SYSTEM WITH THE LOAD SENSITIVITY FACTOR

LINE FLOW ANALYSIS OF IEEE BUS SYSTEM WITH THE LOAD SENSITIVITY FACTOR

... the system operation. For the mighty interconnected grid system, the power shortage results continuous hike in ...grid system modern system theory and optimization techniques are being ...

6

Design and Allocation of UPFC and Generator in IEEE Bus System for Improvement of Voltage

Design and Allocation of UPFC and Generator in IEEE Bus System for Improvement of Voltage

... standard IEEE 14-bus network is used for the numerical ...The IEEE 14-bus network can be decomposed into: a transmission system (69 KV) referred by « zone A » and a distribution ...

10

Comparative Study of Depending Factors of CCT in IEEE 14 Bus System

Comparative Study of Depending Factors of CCT in IEEE 14 Bus System

... power system is expected to serve the needs of the customers with improved reliability and security parameters of the ...power system which offers uninterrupted service to its customers is said to be highly ...

7

OPTIMAL LOCATION OF STATCOM USING PSO IN IEEE 30 BUS SYSTEM

OPTIMAL LOCATION OF STATCOM USING PSO IN IEEE 30 BUS SYSTEM

... STATCOM bus. The bus introduced four parameters, the same number as the system ...The bus the STATCOM is connected to remains a load bus and so is the STATCOM ...

10

Economic Load Dispatch for IEEE 30-Bus System Using PSO

Economic Load Dispatch for IEEE 30-Bus System Using PSO

... 39 | P a g e 6.1 CONCLUSION: In this report, three techniques (Lambda Iteration, Genetic Algorithm & PSO) have been applied to solve the ELD problem to compare the superiority among them. PSO showed high quality ...

40

324 IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY, VOL. 57, NO. 1, JANUARY /$ IEEE

324 IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY, VOL. 57, NO. 1, JANUARY /$ IEEE

... show results in ...the system, to the authors’ knowledge, is not possible, as this would require knowing the distribution of signals that have been low-pass ...

11

Improvement of Voltage Stability in 57- Bus System Employing Wind Generation using UPQC

Improvement of Voltage Stability in 57- Bus System Employing Wind Generation using UPQC

... in 57- Bus system is successfully designed, modeled & simulated using MATLAB ...of results of 57- Bus system with & without multiple wind generation UPQC’s indicating that ...

12

Dynamic Voltage Stability Studies using a Modified IEEE 30-Bus System

Dynamic Voltage Stability Studies using a Modified IEEE 30-Bus System

... Although, different FACTs devises and a well modelled generator controller helps in enhancing voltage stability of a system. However, this cannot be compared to the benefit which HVDC systems offers, namely; ...

9

Show all 10000 documents...

Related subjects