Polishing Systems
Comparative evaluation of enamel surface roughness after debonding using four finishing and polishing systems for residual resin removal—an in vitro study
... Our results showed that Soflex disc group created roughest enamel surface in comparison to other three groups. Results were in accordance with the results of Challa et al. [15], who assessed the effectiveness of five ...
10
The effect of various composite polishing systems on the surface roughness and micro hardness of nanofill and nanohybrid composite resin restoratives” An in vitro study
... and polishing systems are being marketed to achieve the best overall ...and polishing of different composite restoration materials (Mohammed, ...
5
Comparison of One Step and Multistep Polishing Systems for the Surface Roughness of Resin Composites
... and polishing systems on the surface roughness of a microfilled (Amaris), and a nanofilled resin composite (Clearfil Majesty Esthetic) using Scanning electron microscope (SEM) analysis and surface roughness ...
8
Effects of different polishing systems on the surface roughness and microhardness of a silorane-based composite
... tain polishing systems, such as felt disk and diamond paste (G2) and silicone tips (G4), will cause the silorane-based resin composite to be more prone to plaque accu- mulation, due to the production of ...
10
A Comparative Evaluation of Surface Roughness and Immediate Colour stability of Two Nanocomposites After Polishing with Two Different Polishing Systems: An In Vitro study
... before polishing using spectrophotometer ...different polishing systems, 1 .Astropol with its finishing grit, polishing grit and high gloss polishing grit ...after polishing ...
120
The Influence of Different Polishing Systems on the Surface Roughness and Microhardness of Nanocomposites after Exposure to Acid Drink
... and polishing procedures were performed by the same ...technique polishing systems (Table 1): G1 – Control group (no polishing treatment); G2 - Soft- Lex Discs; G3 - Diamont Master Discs; G4 - ...
8
The effect of two finishing and polishing systems on the surface roughness of two composite resins
... While, Vera et al. , 38 reported that the final surface texture was material and technique dependent. In the present study the final polish obtained on a composite restoration would be determined by two factors; ...
6
Effect of two polishing systems on the surface roughness of different composite restorative materials
... surface treatment as a control groups, while (B,E) were polished by SJK dent system and(C, F) polished by Opti4 dental AZ system. Surface roughness of each samples were investigated by Digital Portable Tester ...
6
Evaluation of Surface Roughness and Streptococcus mutans Adhesion to Bulk Fill Resin Composites Polished with Different Systems
... The polishing systems used in this study were Sof-Lex multi-step, PoGo one step, and Mylar ...the polishing systems were significant (p < ...Mylar polishing system revealed the ...
15
Efficiency of a natural wetland for effluent polishing of a septic tank
... treatment systems for effluent purification has developed rapidly over the last 30 years with the increasing scientific documentation of the role of plants in wastewater purification [23, ...wetland systems ...
7
The Effects of Porcelain Polishing Techniques on the Color and Surface Texture of Different Porcelain Systems
... porcelain polishing techniques on the color change and surface roughness of feldspathic porcelains and lithium disilicate glass-ceramic ...porcelain systems and polishing techniques (p < ...
7
Iterative Document Representation Learning Towards Summarization with Polishing
... of polishing process: Next, to fully investigate how the iterative process influences the extracting results, we draw heatmaps of the ex- tracting probabilities for each decoder at each it- ...
10
Investigating The Force Imposed In Polishing Process For Comau Robot
... course, polishing process on these three types of surface require a difference force ...in polishing, drilling, grinding and any work type that involved a ...do polishing process of three different ...
24
Polishing the craft of genetic diversity creation in directed evolution
... Genome engineering is the art of genome-scale alteration that gives rise to a desired phenotype. Other than allowing us to experimentally probe biological and medical questions (e.g., understanding molecular mechanisms ...
16
Research on edge-control methods in CNC polishing
... For polishing in the semiconductor sector it can be important because of depth-of-focus limitations of photolithography, and the need to maximize silicon useful ...in polishing, one studying the parametric ...
13
The use of copper-based antifoulings on aluminium ship hulls
... C [at.-%] 2 2 4 1 70 1 5 7 8 Figure 15 Self Polishing Copolymer x120 Surface of the SPC after immersion Table 6 Self Polishing Copolymer x120 As seen EDX results of SPC surface after imm[r] ...
9
Electrochemical Polishing of Metallic Titanium in Ionic Liquid
... Anodic decomposition of ionic liquid at higher potential The anolyte of TMHA-Tf2 N ionic liquid after the potentiostatic electrolysis at +10.0 V were investigated.. The two-compartment c[r] ...
6
Design of Shoe Sole Cleaning with Polishing Machine
... in polishing the shoe, where the liquid polish is manually applied to the shoe by the ...with polishing machine is a complete set up produced for cleaning the shoe in order to maintain dust free environment ...
8
Using FEM technology for optical surfaces polishing
... surface polishing require unlike a traditional flat or spherical surfaces polishing a different attitude, because there is possible to employ traditional technology based on large diameter polishing ...
5
Evaluation of the Surface of Nitinol after MR Polishing Process
... conventional polishing and MR polishing were used to minimize the corrosion and residual stress when the nitinol is used as ...tional polishing was decreased by MR ...MR polishing can be used ...
10