• No results found

Standby system

Reliability and Availability Analysis of a Dissimilar Units Cold Standby System with Repair or Replacement of Degraded Unit after Inspection

Reliability and Availability Analysis of a Dissimilar Units Cold Standby System with Repair or Replacement of Degraded Unit after Inspection

... In this paper a stochastic model of a cold standby system is investigated. The system has two dissimilar units and a service facility. An original unit is in working mode and another duplicate unit ...

8

Modeling and evaluation of MTSF of a repairable 2-out-of-4 warm standby system attended by repair machines and repairmen

Modeling and evaluation of MTSF of a repairable 2-out-of-4 warm standby system attended by repair machines and repairmen

... warm standby system and derived its corresponding mathematical ...to system failure ...the system parameters have been ...the system. Expression for mean time to system failure ...

9

Steady State Behaviour of a Cold Standby System Consisting of Turbine, Boiler and Fans

Steady State Behaviour of a Cold Standby System Consisting of Turbine, Boiler and Fans

... engineering system. The power plant system in any industry serves as a backbone to ...cold standby system operating in a power plant ...The system comprises of a turbine, a high ...

7

Semi Markov Approach for Asymptotic Performance Analysis of a Standby System with Server Failure

Semi Markov Approach for Asymptotic Performance Analysis of a Standby System with Server Failure

... cold standby system consisting of two identical units and a single server (service facility) has been ...The system model has been developed using the theory of semi-Markov processes and the ...

6

Busy Period Analysis of a Dissimilar Unit Cold Standby System with Repair or Replacement of Degraded Unit after Inspection

Busy Period Analysis of a Dissimilar Unit Cold Standby System with Repair or Replacement of Degraded Unit after Inspection

... cold standby system is developed. The system consists of two dissimilar units and a ...whereas standby is taken as some duplicate unit. The standby unit can fail after crossing the ...

11

Reliability and Availability Analysis of a Dissimilar Unit Cold Standby System withMaximum Redundancy Time Limit

Reliability and Availability Analysis of a Dissimilar Unit Cold Standby System withMaximum Redundancy Time Limit

... cold standby system is ...the system. Initially the system starts operating taking original unit in active and duplicate in passive ...

10

A Standby System Model under Maximum Redundancy Time and Gamma Repairs

A Standby System Model under Maximum Redundancy Time and Gamma Repairs

... or system is always being challenging but essentially ...cold standby. The system studies with passive spares i.e. cold standby redundancy have always been riveting ...cold standby ...

9

Benefit Analysis of Emergency Standby System Promoted to Cogeneration System

Benefit Analysis of Emergency Standby System Promoted to Cogeneration System

... emergency standby system comb ined with absorption chille r promoted to cogeneration system is ...and system constraints are taken into account in the ...cogeneration system. The ...

6

Economic Analysis of a System Reliability Model with Priority to Preventive Maintenance over Repair subject to Weather Conditions

Economic Analysis of a System Reliability Model with Priority to Preventive Maintenance over Repair subject to Weather Conditions

... cold standby system with priority to preventive maintenance activity over the repair of the ...the system immediately whenever required and works only in normal weather ...

9

Analysis of a 3-Unit Induced Draft Fan System with One Warm Standby

Analysis of a 3-Unit Induced Draft Fan System with One Warm Standby

... of system effectiveness for different systems were discussed by many researchers ...unit standby systems were also done by several ...unit system for an ash handling plant where situation of ...

9

Reliability for Multicomponent System using Pareto Distribution

Reliability for Multicomponent System using Pareto Distribution

... The reliability of a multi component standby system of stress - strength model is considered. Reliability has been derived for cases.Numerical calculations for R (r), r=1, 2, 3 have been obtained for the ...

6

Analysis of Two-Dissimilar Component System with Uncertain Availability of Repairman

Analysis of Two-Dissimilar Component System with Uncertain Availability of Repairman

... cold standby system with two stage repair and waiting ...component system. The system operates even if a single component ...of system effectiveness such as MTSF, A,B ...

10

Interval Estimation of the Availability of a Two-Compressor with Erlangian Repair Time

Interval Estimation of the Availability of a Two-Compressor with Erlangian Repair Time

... two-unit standby system with non-instantaneous switch-over and "dead time" and obtain exact confidence limits for the steady-state availability of ...unit standby system and obtain ...

16

A Monotone Process Replacement Model for a Two Unit Cold Standby Repairable System

A Monotone Process Replacement Model for a Two Unit Cold Standby Repairable System

... deteriorating system, it is reasonable to assume that the successive working times are stochastically decreasing while the consecutive repair times after failures are stochastically increasing, due to the ageing ...

8

THE OPTIMAL SYSTEM FOR SERIES SYSTEMS WITH WARM STANDBY COMPONENTS AND A REPAIRABLE SERVICE STATION

THE OPTIMAL SYSTEM FOR SERIES SYSTEMS WITH WARM STANDBY COMPONENTS AND A REPAIRABLE SERVICE STATION

... Redundancy, repair maintenance, and preventive maintenance are some of the well-known methods by which the reliability of a system can be improved. Two- unit standby redundant systems have been extensively ...

17

Standby Redundancy Allocation for a Coherent System under Its Signature Point Process Representation

Standby Redundancy Allocation for a Coherent System under Its Signature Point Process Representation

... spare standby redundancy alloca- tion for a coherent system of dependent components without simultaneous failures, at component level, under a coherent system signature point process representation ...

13

A Stochastic system with possible maintenance of Standby before operation and inspection over replacement of the failed unit

A Stochastic system with possible maintenance of Standby before operation and inspection over replacement of the failed unit

... to system failure (MTSF), availability and profit function go on decreasing with the increase of failure rate (λ) while they increase with the increase of repair rate (α), inspection rate (β 1 ) maintenance rate ...

11

Reliability Enhancement of Distribution System Integrated with Rigorously Modelled Standby DG s

Reliability Enhancement of Distribution System Integrated with Rigorously Modelled Standby DG s

... A different reliability modeling will be required if the DG capacity available is insufficient to fulfill the maximum demand of all the customers connected at i th load point. In such situation the load point is ...

10

RELIABILITY AND FUZZY ANALYSIS OF A SYSTEM HAVING THREE UNITS

RELIABILITY AND FUZZY ANALYSIS OF A SYSTEM HAVING THREE UNITS

... for system managers and they are in dire need for such system which is fault ...the system fault tolerant and it is vital for proper utilization and maintenance of any ...having standby ...

17

TWO UNIT COLD STANDBY PRIORITY SYSTEM WITH FAULT DETECTION AND PROVISION OF REST

TWO UNIT COLD STANDBY PRIORITY SYSTEM WITH FAULT DETECTION AND PROVISION OF REST

... to system failure when the system starts from state S i , S i ∈ E and let π i ( ) t = P [ U i ≤ t ] be the cdf of time to system failure for the first time when it starts operation from state S i ...

15

Show all 10000 documents...

Related subjects