Surfaces (Technology) - Analysis
Methodology for Surfaces Analysis and Classification
... present analysis methodology for different types of ...of surfaces. We have proposed several classes and ways to place surfaces in proper classes, according to their characteristic ...and ...
7
Analysis of leaf surfaces using scanning ion conductance microscopy
... leaf surfaces due to their micoscale roughness (AFM has a limited ability to accommodate surfaces with large changes in height, changes above several microns prohibit imaging) and hence is limited to the ...
17
Nanofractal Analysis of Material Surfaces Using Atomic Force Microscopy
... Based on their results, the present study has been conducted to clarify the actual state of the surface nano- structure and to establish a computer-aided engineering (CAE) method for estimating them. At first, the surface ...
10
Corrosion wear and microstructure analysis of surfaces coated by hardfacing electrode and nitriding
... all surfaces that have come into contact with the ...line analysis N concentration decreasingly continues towards the depth of parent ...the analysis reflects from the base used in SEM device (Figure ...
7
Analysis of Frequency Selective Surfaces for Radar Absorbing Materials
... Selective Surfaces (FSS) for radar absorbing materials (RAM) are increasing, but it is still a challenge to select a proper FSS for a particular material as well as the dimensions of FSS for optimized ...selective ...
18
Bloodstain Patterns on Textile Surfaces- A Fundamental Analysis.
... textile surfaces could not be carried out as that of regular stains due to the anisotropic nature of textiles and the plethora of options available for choosing a textile ...pattern analysis on two of the ...
167
A Mode-Matching Technique for Analysis of Scattering by Periodic Comb Surfaces
... dimensional surfaces are computationally ...comb surfaces illuminated by a plane ...waves. Analysis is performed for two cases where the comb thickness is either infinitely thin or of a finite ...
10
Analysis of the discontinuous Galerkin method for elliptic problems on surfaces
... error analysis have been successfully applied to problems on surfaces via the intrinsic approach in Dziuk (1988) based on interpolating the surface by a triangulated ...evolving surfaces in Dziuk ...
22
Modeling and Analysis of Dimpled Textured Surfaces on Rolling Pairs
... In this work, the control of the friction of dry sliding contact through micro surface texturing is the main objective. To accomplish this objective, a thorough analysis of the mechanisms involved in dry sliding ...
6
Structural and compositional analysis of cobalt palladium model catalyst surfaces
... Exposure of both cobalt-rich and palladium-rich alloys to CO at 300 K led to strong segregation of cobalt to the surface. The starting composition in the cobalt rich alloy of 30% was reduced to almost zero in the top ...
171
Seismic Stability Analysis af a Cask Transporter on Sloped Surfaces
... sliding analysis, where appropriate consideration has to be given at any instant of time during the seismic excitation to the friction resistance being overcome, thus resulting in some level of ...
8
Analysis of discontinuous Galerkin methods on surfaces
... The efficient computation of the surface lifting ξ and the signed distance function d are central to implementing the surface DG methods analysed in the previous sections; namely for performing grid refinements, as newly ...
155
Fractal analysis of topography and reflectance surfaces
... wavelength), whereas the flattening behaviour of spectra occurs within larger observation scales (small wave number) still exists between the original and planar trend removed surfaces (compare between Figs. 2.10a ...
279
Analysis of Vibration Generated by the Rubbing of Flat Surfaces
... Using this test configuration, a different contact role can be assigned to each of these contact interfaces. Rubbing the uppermost disk will cause asperity-related impacts on the upper contact interface, which will ...
6
ABSTRACTS: October 1978149-154
... Application of Thin Films to Adsorption and Catalysis on Metals and Alloys.. The paper discusses developments in the analysis and characterisation of film surfaces, the surfac[r] ...
6
Optimization of ultrasonic microwave synergistic extraction of anthocyanins from Acanthopanax sessiliflorus (Rupr et Maxim ) Seem
... Response surfaces and contour plot showing the effects of ultrasonic power and extraction time on extraction rate The response surfaces and contour plots of Figures 4 show that anthocyanins extraction rate ...
5
Direct organocatalytic enantioselective functionalization of SiOx surfaces
... chiral surfaces prepared by click chemistry, with the same tips and surfaces used for comparison of the adhesion force ...measurements. Analysis of the adhesion values derived from the D-cysteine ...
5
Spatial autocorrelation analysis of migration and selection.
... We test various assumptions necessary for the interpretation of spatial autocorrelation analysis of gene frequency surfaces, using simulations of Wright’s isolation-by-distance[r] ...
11
PHYSICO-TECHNOLOGICAL ASPECTS OF WORK OF LUBRICANT FILMS IN THE TRIBOSYSTEM "OVERHEAD LINE – CURRENT COLLECTOR CONTACT STRIP"
... comprehensive analysis of the processes occurring in the lubricant films of the friction surfaces of the tribosystem «overhead line – current collector contact strip» (OLCCCS) and identification of the ...
9
Modeled Surface Observations for Spatial Analysis of Landscape Dynamics
... of analysis, geoprocessing is an essential tool, because it combines several technologies that help in this ...planimetric surfaces on the interpretation of landscape ...
9