MICE_Users_Guide_Jul82.pdf

For the initial installation follow the instructions below precisely. The operating system may be reinstalled at any time should you wish to change some or any

(UHLESS OTHERWISE

When a command to read that block is received, the SCSI PCBA will trans- fer the data in and out of the buffer in a first in-first out mode (FIFO operation).. Long blocks during

The data directory is the disk drive and/ or directory specified as the default with the Data command on the Default Directories menu (see page 141), and is used to

Records in a database often require repetitive entries: product names, dates, division names, and so on. In such cases, you will find it useful to set up a series of records

If you did not opt to install a printer (did not complete portions E, F, G, or H under “Communication Setup Selections” on page 12), you must set the Printer portion of

The B (Block Trace) parameter provides a trace in the PRN file showing register usage information collected by the data flow analyzer.. This parameter is not

Although SELDSK must return the header apdress on each call, i t is advisable to postpone the actual physical disk select operation until an I/O function