• No results found

Antenna Electromagnetic Band Gap

Electromagnetic band gap (EBG) for microstrip antenna design

Electromagnetic band gap (EBG) for microstrip antenna design

... 5.1 Conventional Microstrip antenna 44 5.2 Electromagnetic band gap (EBG) structure 48 5.2.1 Effect of the vias locations 52 5.2.2 Effect of the separation (gap) 53 5.3 Microstrip ...

16

Gain Enhancement and Wideband RCS Reduction of a Microstrip Antenna Using Triple-Band Planar Electromagnetic Band-Gap Structure

Gain Enhancement and Wideband RCS Reduction of a Microstrip Antenna Using Triple-Band Planar Electromagnetic Band-Gap Structure

... In this paper, a triple-bands EBG structure realized by adding two planar spiral inductances on a conventional planar EBG structure is used to reduce the RCS and enhance the gain of antenna. Equivalent model and ...

6

Microstrip Array Antenna with New 2D-Electromagnetic Band Gap Structure Shapes to Reduce Harmonics and Mutual Coupling

Microstrip Array Antenna with New 2D-Electromagnetic Band Gap Structure Shapes to Reduce Harmonics and Mutual Coupling

... patch antenna radiates, a portion of total available radiated power becomes trapped along the surface of the ...using electromagnetic band-gap (EBG) or photonic band-gap ...

11

A Novel Design Approach for Dual-Band Electromagnetic Band-Gap Structure

A Novel Design Approach for Dual-Band Electromagnetic Band-Gap Structure

... dual-band electromagnetic band-gap (EBG) structure is proposed in this ...the band-gap characteristics of the EBG structures. Several dual-band EBG structures are designed ...

11

Low Specific Absorption Rate Antenna Using Electromagnetic Band Gap Structure for Long Term Evolution Band 3 Application

Low Specific Absorption Rate Antenna Using Electromagnetic Band Gap Structure for Long Term Evolution Band 3 Application

... proposed antenna with surrounded EBG unit cells gives minimum SAR value for 1 gram (g) of tissue, so according to FCC standards the SAR should be assessed for 1 g and 10 g of tissue mass, whereas generally 1 g of ...

12

Mutual Coupling Reduction of Micro Strip Antenna Array by using the Electromagnetic Band Gap Structures

Mutual Coupling Reduction of Micro Strip Antenna Array by using the Electromagnetic Band Gap Structures

... From figure-9 the simulated current distribution can noticed at 5.8GHz. The EBG structure reduces the surface wave’s excitation so the current density on the antenna surface also reduced. The simulated results ...

6

Designing of High Gain Hemispherical Dielectric Resonator Antenna with Electromagnetic Band-Gap Structure

Designing of High Gain Hemispherical Dielectric Resonator Antenna with Electromagnetic Band-Gap Structure

... Fig. 5 shows the simulated gain as a function of frequency for the two antennas, with and without EBG structure. The EBG structure allows us to increase the gainof the antenna around the operating frequency. For ...

6

Four Element Microstrip Antenna Array with Electromagnetic Band Gap Structure and Silver Material Deposition for Reduced Mutual Coupling

Four Element Microstrip Antenna Array with Electromagnetic Band Gap Structure and Silver Material Deposition for Reduced Mutual Coupling

... microstrip antenna array. The overall bandwidth of the microstrip antenna array with silver material coating is equal to ...microstrip antenna array with silver material coating of 30 mm thickness is ...

15

Microstrip Array Antennas Integrated with Electromagnetic Band-Gap (EBG) Structure for Low Coupling

Microstrip Array Antennas Integrated with Electromagnetic Band-Gap (EBG) Structure for Low Coupling

... The FDTD method is used to analyze the mutual coupling of microstrip antennas. The mutual coupling of antennas fed by microstrip lines has been solved using the FDTD method and the probe fed antenna case is ...

8

Design a Microstrip Patch Antenna with Electronic Band gap Structure for Wireless Devices

Design a Microstrip Patch Antenna with Electronic Band gap Structure for Wireless Devices

... the antenna designed must be able to fit in such a cellular ...patch antenna has been successfully designed having a center frequency of ...patch antenna have been designed to be 28 mm by 28 mm and ...

7

Surface Waves of Finite Size Electromagnetic Band Gap Woodpile Structures

Surface Waves of Finite Size Electromagnetic Band Gap Woodpile Structures

... In antenna applications, when the woodpile structure is used as substrate for planar antennas, a thin dielectric substrate onto which the antennas are printed is ...the antenna that interacts with the EBG ...

16

RCS Reduction Using a Miniaturized Uni-Planar Electromagnetic Band Gap Structure for Circularly Polarized Microstrip Antenna Array

RCS Reduction Using a Miniaturized Uni-Planar Electromagnetic Band Gap Structure for Circularly Polarized Microstrip Antenna Array

... microstrip antenna array is proposed with severe restriction in the space between ...CP antenna arrays are simulated, fabricated and ...proposed antenna has a lower RCS value in-band and ...

7

Design and Analysis of Miniaturized Microstrip Patch Antenna with Electromagnetic Band GAP Structures Manish Kansal, Jitender Chaudhary

Design and Analysis of Miniaturized Microstrip Patch Antenna with Electromagnetic Band GAP Structures Manish Kansal, Jitender Chaudhary

... the electromagnetic band gap structure, their various configurations, and successive improvement up to today’s uni-planar ...An antenna is an indispensable part of a communication system to ...

6

Ultra-Wide Bandwidth Microstrip Monopole Antenna by Using Electromagnetic Band-Gap Structures

Ultra-Wide Bandwidth Microstrip Monopole Antenna by Using Electromagnetic Band-Gap Structures

... the antenna size since it is much easier in ...proposed antenna are shown in Figure 8 at two different ...on antenna performance. Figure 9 shows the variation of antenna gain versus frequency ...

10

Triple Band Notched UWB Antenna Design Using Electromagnetic Band Gap Structures

Triple Band Notched UWB Antenna Design Using Electromagnetic Band Gap Structures

... microstrip antenna considerably useful while the major concern of such antennas is low ...UWB antenna with band- notch ...for band-notch designs such as cutting slots in patch/ground plane ...

9

Electromagnetic Susceptibility of an Electromagnetic Band-Gap Filter Structure

Electromagnetic Susceptibility of an Electromagnetic Band-Gap Filter Structure

... the electromagnetic compatibility (EMC) of an EBG structure have been ...the electromagnetic susceptibility (EMS) of an EBG microstrip structure to interference introduced by a nearby radiating circuit ...

26

Enhanced Low Profile, Dual-Band Antenna via Novel Electromagnetic Band Gap Structure

Enhanced Low Profile, Dual-Band Antenna via Novel Electromagnetic Band Gap Structure

... an antenna to interact with the ...the antenna was designed considering that it would be mounted on top of the EBG ...dipole antenna was used [17–21], resonating around ...the antenna ...

11

Electromagnetic Band Gap (EBG) Structure

Electromagnetic Band Gap (EBG) Structure

... In order to suppress surface wave propagation, there were some techniques which can be use, such as special antenna designs, micromachining the substrate and employing electromagnetic band gap ...

24

Electromagnetic Band Gap Structures Incorporate with Dual Band Microstrip Antenna Array

Electromagnetic Band Gap Structures Incorporate with Dual Band Microstrip Antenna Array

... lower band radiating elements sometimes demonstrate higher (harmonics) resonant frequencies, and if it happens to resonate at the intended second band of frequency of operation at a different phase, this ...

12

Electromagnetic Band Gap Structures in MSA

Electromagnetic Band Gap Structures in MSA

... The electromagnetic band gap structures are widely used to suppress pronounced surface waves in antennas with thicker substrate and higher dielectric ...of Electromagnetic band ...

9

Show all 10000 documents...

Related subjects