• No results found

CdTe-CdS solar cells

Power Conversion Enhancement of CdS/CdTe Solar Cell Interconnected with Tunnel Diode

Power Conversion Enhancement of CdS/CdTe Solar Cell Interconnected with Tunnel Diode

... the CdTe absorber layer, providing effective separation of the photo gener- ated ...efficiency solar cells of efficiencies up to 12.5% were developed with a CdTe low tempera- ture (<450˚C) ...

8

Optimisation of CdTe electrodeposition voltage for development of CdS/CdTe solar cells

Optimisation of CdTe electrodeposition voltage for development of CdS/CdTe solar cells

... the CdTe material layers will be either Te-rich or Cd-rich. When the CdTe is stoichiometrically grown and heat treated in air, only the (111) peak is dominant in the XRD diffractogram indicating a high ...

18

Scientific complications and controversies noted in the field of CdS/CdTe thin film solar cells and the way forward for further development

Scientific complications and controversies noted in the field of CdS/CdTe thin film solar cells and the way forward for further development

... electroplated CdTe thin films [29]. Not only in ED-CdTe thin films, but also in CSS-CdTe thin films and melt-grown bulk CdTe, Te-pre- cipitation has been observed ...in CdTe is a ...

16

Optimisation of pH of cadmium chloride post growth treatment in processing CDS/CDTE based thin film solar cells

Optimisation of pH of cadmium chloride post growth treatment in processing CDS/CDTE based thin film solar cells

... glass/FTO/n-CdS/n-CdTe/p-CdTe/Au cells were isolated by carefully removing surrounding layers to ensure that there was no peripheral collection as suggested by Godfrey et al ...

24

Optimisation of pH of the CdCl2+Ga2(SO4)3 activation step of CdS/CdTe based thin film solar cells

Optimisation of pH of the CdCl2+Ga2(SO4)3 activation step of CdS/CdTe based thin film solar cells

... against hv where α is the absorption coefficient, h is the plank’s constant and v is the incident photon frequency and λ is the wavelength (Tauc, 1968). Based on observation, all the glass/FTO/n- ...

23

A High Efficiency Ultrathin CdTe Solar Cell for Nano Area Applications

A High Efficiency Ultrathin CdTe Solar Cell for Nano Area Applications

... stable solar cell fabrication, thin film polycrystal- line CdS/CdTe solar cells are one of the most promising candidates for photovoltaic energy conversion in recent ...The CdTe ...

9

CdTe nanowire structures for solar cells

CdTe nanowire structures for solar cells

... the CdTe/CdS ...on CdTe NWs encapsulated in poly (3-octylthiophene) 155 , a 3.53% ZnO/CdS core-shell NW device 80 and a device that includes ZnO nanocones embedded into a CdTe film 156 ...

223

Graded Bandgap solar cells using all electrodeposited ZnS, CdS and CdTe thin films

Graded Bandgap solar cells using all electrodeposited ZnS, CdS and CdTe thin films

... Photoelctrochemical cell (PEC) measurements were used to confirm the electrical conductivity type of all the semiconductor layers prior to and after post-deposition annealing before device fabrication. Details of the PEC ...

21

Optimization of Electrics Parameters CdS/CdTe Thin Film Solar Cell Using  Dielectric Model

Optimization of Electrics Parameters CdS/CdTe Thin Film Solar Cell Using Dielectric Model

... film CdS-CdTe photovoltaic devices are leading technology for high efficiency, and low cost solar ...control solar cells parameters degradation and maximize the efficiency of energy ...

12

Research and development of CdTe based thin film PV solar cells

Research and development of CdTe based thin film PV solar cells

... Figure 4.3 shows another set of 21 ED-CdS layers (set 2) grown at different cathodic voltages. As the pH decreased, the cathodic voltage shifted upwards. It is observed from the Figure; the highest and lowest ...

241

Performance analysis of CdTe solar cell using different n-type Layers

Performance analysis of CdTe solar cell using different n-type Layers

... thin-film solar cells. CdTe is the first Photovoltaic technology at a low ...properties CdTe is the most appropriate material for design of solar ...the CdTe solar cell ...

7

Optimization of High-Efficiency CdS/CdTe Thin Film Solar Cell Using Step Doping Grading and Thickness of the Absorption Layer

Optimization of High-Efficiency CdS/CdTe Thin Film Solar Cell Using Step Doping Grading and Thickness of the Absorption Layer

... When modeling thin film solar cells, it is essential to take into account the interaction of optical and electrical that occur during the solar cells operation. The fundamental equations are ...

6

Fabrication of cadmium sulfide and cadmium telluride solar cells and their characterisations

Fabrication of cadmium sulfide and cadmium telluride solar cells and their characterisations

... Sel-sel solar yang diperbuat daripada tapak filem tipis CdTe mempunyai potensi kecekapan yang tinggi dan telah dikaji selama lebih 40 tahun kerana kelebihannya dalam teknologi pembuatan, pemendapan pantas, ...

23

A High Efficiency Ultra Thin (1.8 um) CdS/CdTe p-i-n Solar Cell with CdTe and Si as BSF layer

A High Efficiency Ultra Thin (1.8 um) CdS/CdTe p-i-n Solar Cell with CdTe and Si as BSF layer

... (PV) cells provide the lowest EBPT (energy payback time) and emit less amount of GHG (green house gases) among different types of PV ...of CdTe-based solar cells. A high efficiency ...

5

An investigation of the influence of different transparent conducting oxide substrates/front contacts on the performance of CdS/CdTe thin film solar cells

An investigation of the influence of different transparent conducting oxide substrates/front contacts on the performance of CdS/CdTe thin film solar cells

... a solar cell [15]. Sometimes CdS/CdTe solar cell researchers have introduced different TCOs as buffer layers between the front contact and CdS in pursuit of improvement in solar ...

16

Electronic Properties of CdS/CdTe Solar Cells as Influenced by a Buffer Layer

Electronic Properties of CdS/CdTe Solar Cells as Influenced by a Buffer Layer

... polycrystalline CdTe films are an essential component of many electronic devices such as detectors of high energy photons [1] and thin-film solar cells ...in CdTe solar cells has ...

7

Thin film solar cells using all electrodeposited ZnS, CdS and CdTe materials

Thin film solar cells using all electrodeposited ZnS, CdS and CdTe materials

... other solar energy conversion technologies, PV technology has provided power for various levels of application ranging from low power applications in the order of ...PV solar energy conversion is based on ...

348

Analysis of the Electronic Properties of All electroplated ZnS, CdS and CdTe Graded Bandgap Photovoltaic Device Configuration

Analysis of the Electronic Properties of All electroplated ZnS, CdS and CdTe Graded Bandgap Photovoltaic Device Configuration

... for CdS/CdTe- based devices show prospect of achieving even higher conversion ...the solar spectrum. The main highlight of graded bandgap solar cells is the short-circuit current ...

17

Unravelling complex nature of CdS/CdTe based thin film solar cells

Unravelling complex nature of CdS/CdTe based thin film solar cells

... electroplated CdS lay- ers [23, ...the CdS layer thickness. High efficiency solar cells are produced with ~50–100 nm thick CdS layers ...

21

15 3% efficient graded bandgap solar cells fabricated using electroplated CdS and CdTe thin films

15 3% efficient graded bandgap solar cells fabricated using electroplated CdS and CdTe thin films

... superior solar cells arise from device configurations with Cd-rich n-type CdTe rather than Te-rich p-type CdTe as the main absorbing ...

11

Show all 10000 documents...

Related subjects