• No results found

CST microwave studio

CST Microwave Studio

CST Microwave Studio

... based microwave vacuum dryer which was used to conduct preliminary investigation of the effects of drying parameters on the drying kinetics of rice ...the microwave chamber and its auxiliary attachments. ...

6

Implementation of Compact LPF Utilizing Defected Structures and Surface Mount Capacitor for Low Insertion Loss and Elliptic Characteristics

Implementation of Compact LPF Utilizing Defected Structures and Surface Mount Capacitor for Low Insertion Loss and Elliptic Characteristics

... In this section, a new design for compact size and low cutoff frequency third order butterworth LPF is introduced. SIR, DMS, DGS, and surface mount capacitor are utilized to obtain the desired LPF characteristics. A third ...

9

Broad-Band Dipole for RFID Applications

Broad-Band Dipole for RFID Applications

... The two circular areas have been placed at a distance of λ/4 from the antenna port, and the parameters given in Figures 3(b) and 3(c) have been optimized in order to satisfy the matching condition with respect to the tag ...

10

Multiple Cavity Modeling of a Feed Network for Two Dimensional Phased Array Application

Multiple Cavity Modeling of a Feed Network for Two Dimensional Phased Array Application

... The theory has been validated by the excellent agreement with the theoretical, CST Microwave Studio simulated data and Measured Data. The scattering parameters for the circuit, when excited through ...

6

1.
													A framework for the analysis of dual layer stacked novel microstrip patch antenna design employing flexible substrates

1. A framework for the analysis of dual layer stacked novel microstrip patch antenna design employing flexible substrates

... chloride). It is a probe fed antenna for impedance matching with 50Ω coaxial cable. The results are compared on the basis of variation of different layers of dielectric constant and some of the antenna parameters for ...

7

Multilayered Swastika Antenna Design for Enhancement of Bandwidth

Multilayered Swastika Antenna Design for Enhancement of Bandwidth

... -------------------------------------------------------------------------***------------------------------------------------------------------------ Abstract:- The design issues of a conventional microstrip antenna for ...

7

Experimental studies of 7 cell dual axis asymmetric cavity for energy recovery linac

Experimental studies of 7 cell dual axis asymmetric cavity for energy recovery linac

... additional mode led to the realisation that the approach based on the uncoupled modes assumption (eq.(1)) does not provide an accurate solution. The insert to figure 7 illustrates the set of eigenmodes calculated ...

27

Design and Analysis of Stair-shaped lotus Microstrip Patch Antenna for UWB Applications

Design and Analysis of Stair-shaped lotus Microstrip Patch Antenna for UWB Applications

... ABSTRACT: The paper presents an antenna for Ultra Wideband Applications (3.1 to 10.6 GHz). This paper proposed the design of a compact Stair-Shaped lotus; line feed Microstrip Antenna for Ultra-Wide Band applications. ...

6

Ultra wideband antenna for microwave imaging using modified fractal structure

Ultra wideband antenna for microwave imaging using modified fractal structure

... for Microwave Brain Imaging is proposed by Adhitya Satria ...technique. Microwave imaging is considered as a suitably matched modality to those ...of microwave imaging on brain tumors, which it ...

39

Multilayered Swastika Antenna Design for Enhancement of Bandwidth

Multilayered Swastika Antenna Design for Enhancement of Bandwidth

... -------------------------------------------------------------------------***------------------------------------------------------------------------ Abstract:- The design issues of a conventional microstrip antenna for ...

7

G slot microstrip patch antenna for RFID application

G slot microstrip patch antenna for RFID application

... is CST Microwave Studio. Figure 3.4 shows a screenshot of CST Microwave Studio’s main ...with CST Microwave Studio allows the use of an interactive mouse for data ...

36

Parametric Analysis and Modeling of Jerusalem              cross Frequency Selective Surface

Parametric Analysis and Modeling of Jerusalem cross Frequency Selective Surface

... The present work reports detailed investigation and study of JC FSS with resonant unit cells. The simulations are performed with CST Microwave Studio on single-layer and multilayer substrates for ...

9

A Matching-Pursuit Based Approach for Detecting and Imaging Breast Cancer Tumor

A Matching-Pursuit Based Approach for Detecting and Imaging Breast Cancer Tumor

... named CST Microwave Studio (CST MWS) is used to generate backscattered electric field data from a constructed scenario in which a tumor is located in a breast ...the CST MWS simulation ...

12

Performance Analysis of Different PSK Modulation Schemes for 2X2 MIMO System Using Microstrip Antennas

Performance Analysis of Different PSK Modulation Schemes for 2X2 MIMO System Using Microstrip Antennas

... on CST Microwave studio, the obtained channel matrix from CST has been used for further coding MIMO, symbol Error Rate of all schemes decreases with increase in ...

9

Graphene-Based Nano Patch Antenna For Microwave Radiation Using CST Software

Graphene-Based Nano Patch Antenna For Microwave Radiation Using CST Software

... A design of a coplanar graphene-based nano-patch antenna will be done in the CST software. The material in the patch is simulated only by using graphene. The antenna will not be fabricated since the graphene is ...

24

Dual Band Defected Ground Microstrip Patch Antenna for WLAN/WiMax and Satellite Application

Dual Band Defected Ground Microstrip Patch Antenna for WLAN/WiMax and Satellite Application

... is defected ground structure. The ground has been reduced from all the sides with a pie (  ) at the centre of the ground. Edges along the width are called radiating edges and that along the length are called non ...

5

Design And Simulate Nanofiber Laser Using Microwave CST

Design And Simulate Nanofiber Laser Using Microwave CST

... Firstly thank to ALLAH with blessing and overflow the award I can finish this project. I wish to thank as high appreciation to my project supervisor Mr Anas Bin Abdul Latiff for all the guidance has been given to ...

24

Enhanced features for design of traveling wave tubes using Christine-1D

Enhanced features for design of traveling wave tubes using Christine-1D

... After performing this feasibility study on a known TWT design, we applied our optimization algorithms to the design of a folded waveguide, slow-wave circuit. This is a W- band, 9 kV, 28 mA TWT [15]. The customer provided ...

20

MIMO Performance and Decoupling Network: Analysis of Uniform Rectangular array Using Correlated-Based Stochastic Models

MIMO Performance and Decoupling Network: Analysis of Uniform Rectangular array Using Correlated-Based Stochastic Models

... the spatial correlation function of URA in advanced MIMO technologies. Therefore, our objective in this paper is to experiment the CBSMs at 2.4 GHz. We modelled the transmitter as a uniform rectangular array, and ...

5

Compact Patch Antenna on Structurally Modified Magnetodielectric Substrate

Compact Patch Antenna on Structurally Modified Magnetodielectric Substrate

... are dispersed in low density polyethylene (LDPE) to develop magnetodielectric substrate with varying volume fraction. Volume fraction (VF) of the nickel ferrite beyond 5% makes the composite brittle and fragile, and the ...

10

Show all 3406 documents...

Related subjects