Electro-thermal model for Bipolar latch-up
Hall Effect Latch / Bipolar Switch
... When using Hall-effect technology, a limiting factor for switchpoint accuracy is the small signal voltage developed across the Hall element. This voltage is disproportionally small relative to the offset that can be ...
12
A1250. Hall-Effect Latch / Bipolar Switch PACKAGES:
... the thermal and stress related offset, this novel technique also reduces the amount of thermal noise in the Hall sensor IC while completely removing the modulated residue resulting from the chopper ...of ...
12
Quality Assurance of Coating by Using Electro Thermal Model
... the electro-thermal approach similar to that described, an electrical model for stepped thermo graphy and its analytical solution for estimation of defect ...absolute thermal contrast ...
5
Comparative study between using electro thermal bipolar vessel sealing device and conventional method in haemorrhoidectomy
... the electro- thermal vessel sealing hemorrhoidectomy ...vessels up to 7 mm in ...electrothermal bipolar vessel- sealing device analyze the tissue type and deliver the appropriate amount of the ...
5
A Coupled Electro-Thermal Model for Simulating the Lightning Strike Damage in Cfrps
... the electro-thermal FE model, the plate was modeled using the 3D thermal-electric SOLID69 element ...to thermal balance, a thermal radiation boundary condition of emissivity ...
16
A nonlinear electro-thermal scalable model for high-power RF LDMOS transistors
... namic electro-thermal compact model for LDMOS RF power transistors is described in this ...intrinsic model comprises controlled charge and current sources that have been implemented using ...
11
Parametric modeling and model order reduction for (electro-)thermal analysis of nanoelectronic structures
... parametric model order reduction (PMOR) to compute a reduced-order model (ROM) that is not only of a much lower dimension, but also accurate for all values of the parameters within a specified ...full-order ...
16
Electro Thermal Modelling of Micro EDM
... element model based on the electro thermal theory to predict the MRR of the micro-crater produced from discharges of RC-circuit ...developed model predicts the temperature distribution using ...
6
A physical RC network model for electro thermal analysis of a multichip SiC power module
... the thermal models which can physically reflect the heat-flow paths in a lightweight three-phase half bridge, two-level SiC power module with 6 MOSFETs and can be used for coupled electro-thermal ...
15
Thermal nondestructive testing and spice simulation with approach of electro thermal modelling
... absolute thermal contrast plots of the mild-steel sample, for heat flux values of ...network model of transient heat conduction has been used for the simulations of the above-mentioned experiments on ...
6
Electro-Thermal Modeling to Improve Battery Design
... the electro-thermal model gives us the ability to find hot spots with a particular design, and propose solutions to eliminate it or reduce its ...the thermal images of the 2001 Panasonic NiMH ...
11
Numerical Algorithms for System Level Electro-Thermal Simulation
... a model diffusion-reaction PDE is ...A model 1D problem is used to introduce the novel method and analyze it in details and then a sound extension to 2D case and complex geometries is provided together with ...
160
Electro-Thermal-Mechanical Simulation Capability Final Report
... coupled Electro-Thermal-Mechanical (ETM) simulation as a simulation that solves, in a self-consistent manner, the equations of electromagnetics (primarily statics and diffusion), heat transfer (primarily ...
6
Electro thermal modelling for plasmonic structures in the TLM Method
... 2D model is considered in this ...EM model to thermal at every time step and that both thermal and EM time steps are ...the thermal model is t th & ...the thermal time ...
14
A New PSPICE Electro-Thermal Subcircuit For Power MOSFETs
... 1. Introduction Many power MOSFET models available today are based on an ideal lateral MOSFET device. They offer poor correlation between simulated and actual circuit performance in several areas. They have low and high ...
15
An Improved SPICE Model for the Study of Electro-thermal Static Behavior for two New Generations of SiC MOSFET
... to model the static behavior of two generations of Silicon carbide Metal Oxide Semiconductor Field Effect Transistors (SiC-MOSFETs) subjected to temperature and input voltage ...its electro-thermal ...
6
Bipolar Electro-Fenton System for Textile Dye Removal From Aqueous Solution
... a bipolar electro-Fenton process using stainless steel mesh for removal of methylene blue (MB) as a model of textile dye from aqueous ...proposed electro-Fenton efficacy was ...the ...
6
CiteSeerX — Electro-Thermal Circuit Simulation Using Simulator Coupling
... the electro-thermal behavior the die/header structure was modeled for thermal analysis with ...three-dimensional thermal FEM model was composed of 5120 finite ...the thermal ...
6
Synthesis of Ti3SiC2 Bicarbide Based Ceramic by Electro Thermal Explosion
... The Figure 6 shows the XPS data. The persistence of surface oxide is shown from the intensity of the O 1s line. The spectra of the model compounds were representative of those from the specimens that arise from ...
8
Electro-Mechanical-Thermal Modeling of Carbon Nanotube-Polymer Composites.
... percolation approach and an electro-mechanical-thermal finite-element (FE) approach. The percolation approach addressed current shortcomings and inconsistencies of classical percolation theory, and it was ...
139