• No results found

Overall heat transfer rate

Experimental investigations of polymer hollow fibre heat exchangers for building heat recovery application

Experimental investigations of polymer hollow fibre heat exchangers for building heat recovery application

... These includes the hot water and cooling water inlet and outlet temperature, the mass flow rate of the two streams, the calculated total heat transfer rate, and the overall heat transfer[r] ...

23

Experimental investigation on the heat transfer performance and pressure drop characteristics of γ-Al2O3/water nanofluid in a double tube counter flow heat exchanger

Experimental investigation on the heat transfer performance and pressure drop characteristics of γ-Al2O3/water nanofluid in a double tube counter flow heat exchanger

... the heat transfer rate in various equipment used in microelectronics, industry, transportation, electronic, and ...the heat transfer rate, reduce heat transfer ...

12

Thermodynamic and Hydrodynamic Performance of Double Pipe Heat Exchanger through Bended Strips

Thermodynamic and Hydrodynamic Performance of Double Pipe Heat Exchanger through Bended Strips

... pipe heat exchanger was performed using various bended strip ...water-to-water heat transfer study performed and tested for counter flow ...The heat transfer rates in 10 mm pitch were ...

11

A numerical investigation of γ-Al2O3-water nanofluids heat transfer and pressure drop in a shell and tube heat exchanger

A numerical investigation of γ-Al2O3-water nanofluids heat transfer and pressure drop in a shell and tube heat exchanger

... baffles heat exchanger were compared with Kern and Bell-Delaware methods ...The overall heat transfer coefficients based on the shell side surface area and pressure drops in the shell side ...

7

Analysing the Effectiveness of the Heat Exchanger by Increasing Overall Heat Transfer Coefficient

Analysing the Effectiveness of the Heat Exchanger by Increasing Overall Heat Transfer Coefficient

... Passive heat transfer methods does not need any external power ...convective heat transfer one of the ways to enhance heat transfer rate is to increase the effective ...

6

Thermal Analysis of Corrugated Plate Heat Exchanger by using Ansys Software through FEA Method

Thermal Analysis of Corrugated Plate Heat Exchanger by using Ansys Software through FEA Method

... on heat transfer coefficients are found for an unvarying wall temperature or an unvarying heat ...in heat exchangers with natural action like ...constant heat flux finds application in ...

11

Analysis of Double Pipe Heat Exchanger With Helical Fins

Analysis of Double Pipe Heat Exchanger With Helical Fins

... of heat exchanger widely use in oil refinery and other large chemical processes because it suits high pressure ...pipe heat exchanger, the hot fluid has made to flow through inner tubes and cold fluid is ...

6

AN EXPERIMENTAL PERFORMANCE INVESTIGATION OF COUNTER FLOW HELICAL COILED HEAT EXCHANGER

AN EXPERIMENTAL PERFORMANCE INVESTIGATION OF COUNTER FLOW HELICAL COILED HEAT EXCHANGER

... coiled heat exchanger against a straight tube heat ...the heat transfer in helical circular tubes is higher as compared to Straight tube due to their ...increased heat transfer ...

12

Isothermal Continuous Stirred Adsorption Tower(Csat) Heat Exchanger Rating For Vanadium Catalyst Based So3 Hydration Process

Isothermal Continuous Stirred Adsorption Tower(Csat) Heat Exchanger Rating For Vanadium Catalyst Based So3 Hydration Process

... Shell-and-tube heat exchangers are used commonly in industries and aimed at maintaining constant temperature for the production of sulphuric ...of heat exchange rating models in evaluating overall ...

11

Performance Assessment of Heat Exchanger Using Mamdani Based Adaptive Neuro-Fuzzy Inference System (M-ANFIS) and Dynamic Fuzzy Reliability Modeling

Performance Assessment of Heat Exchanger Using Mamdani Based Adaptive Neuro-Fuzzy Inference System (M-ANFIS) and Dynamic Fuzzy Reliability Modeling

... the heat exchanger is assessed by computing overall heat transfer ...The overall heat transfer coefficient is calculated using log mean temperature difference (LMTD) ...

14

CFD Simulation Of A Shell And Tube Heat Exchanger; Effect Of Physical Features

CFD Simulation Of A Shell And Tube Heat Exchanger; Effect Of Physical Features

... a heat exchanger which is shell and tube heat exchanger with single segmental ...tube heat exchanger using CFD package ANSYS ...the heat transfer performance inside the shell using ...

24

PERFORMANCE COMPARISON OF CORRUGATED PLATE HEAT EXCHANGER WITH FLAT PLATE HEAT EXCHANGER – A THEORITICAL ANALYSIS

PERFORMANCE COMPARISON OF CORRUGATED PLATE HEAT EXCHANGER WITH FLAT PLATE HEAT EXCHANGER – A THEORITICAL ANALYSIS

... and heat transfer rate is very important in the field of application to enhanced performance and to save the money and space ...plate heat exchanger with parallel flow arrangement with regard ...

10

Numerical and heat transfer analysis of shell and tube heat exchanger with circular and elliptical tubes

Numerical and heat transfer analysis of shell and tube heat exchanger with circular and elliptical tubes

... tube heat exchanger design was explained by Gay et ...on heat transfer, while Halle et ...on heat transfer is quite in- teresting to design STHE with the optimistic ap- ...flow ...

18

The effect of Geometrical parameters on heat transfer coefficient in helical double tube exchangers

The effect of Geometrical parameters on heat transfer coefficient in helical double tube exchangers

... investigated heat transfer characteristics of R-134a in double pipe heat ...average heat transfer coefficient and the heat transfer coefficient of this refrigerant would ...

8

Experimental  Investigation Of Heat Transfer In Heat Exchanger Using Different Geometry Of Inserts  A Review

Experimental Investigation Of Heat Transfer In Heat Exchanger Using Different Geometry Of Inserts A Review

... Heat transfer is a discipline of thermal engineering that concerns the generation, use, conversion, and exchange of thermal energy and heat between physical ...systems. Heat transfer is ...

6

Optimisation of Direct Expansion (DX) Cooling Coils Aiming to Building  Energy Efficiency

Optimisation of Direct Expansion (DX) Cooling Coils Aiming to Building Energy Efficiency

... the heat exchanger were dis- cussed based on a distributed-parameter mathematical ...the overall heat transfer coefficient of the heat ...

13

EXPERIMENTAL STUDY OF THE PERFORATED RECTANGULAR FINS BY NATURAL CONVECTION

EXPERIMENTAL STUDY OF THE PERFORATED RECTANGULAR FINS BY NATURAL CONVECTION

... of heat transfer by natural convection can be found in many engineering applications, such as energy transfer in buildings, solar collectors, nuclear reactors and electronic ...examined heat ...

5

Agglomerate Formation and Heat Transfer study in a Novel Mechanically Fluidized Reactor

Agglomerate Formation and Heat Transfer study in a Novel Mechanically Fluidized Reactor

... In Figure 3.6, we see that for both bed temperature set-points, increasing the mixing speed reduced the mass of agglomerates. When increasing the impeller rotation speed, agglomerates break more easily, resulting in ...

110

Linear Layer Thermal Analysis of Lithium-Ion Battery Cooling System for Electric Vehicles

Linear Layer Thermal Analysis of Lithium-Ion Battery Cooling System for Electric Vehicles

... Zhoujian An [4] Lithium-ion power battery has become one of the main power sources for electric vehicles and hybrid electric vehicles because of superior performance compared with other power sources. In order to ensure ...

7

Thermal Cooling Of Computer Hardware

Thermal Cooling Of Computer Hardware

... using heat sinks which operate by carrying the heat either by convection or ...radiation. Heat sinks must have good heat conduction properties such as aluminium or copper, and placed near to ...

24

Show all 10000 documents...

Related subjects