rear surface
Simulation of rear surface contamination for a simple bluff body
... This combination of an eddy-resolving unsteady fl ow solver with extended particle and surface fi lm sub-models provides a suitable tool for the investigation of the rear surface contamination problem. ...
11
Diagnosis of Weibel instability evolution in the rear surface scale lengths of laser solid interactions via proton acceleration
... the rear surface scale lengths of a solid density ...target rear side, a magnetic instability is seeded with an evolution which is strongly dependent on the density scale ...target rear scale ...
10
The influence of preformed plasma on the surface-guided lateral transport of energetic electrons in ultraintense short laser-foil interactions
... and rear surface X-ray measurements indicate that under low contrast laser irradiation a significant proportion of the fast electrons generated at the front side of the target are guided along the front ...
9
Light Trapping in an 18 um Silicon Solar Cell with a Current Density of 34.5 mA/cm 2
... reflective rear mirror on an 18 um silicon solar cell is ...and rear surfaces. Further analysis shows that the rear surface of this solar cell is a partly diffuse surface which improves ...
9
Collimation of energetic electrons from a laser-target interaction by a magnetized target back plasma preformed by a long-pulse laser
... from rear surface of the target, are shown in (b) for the Al target with flat backside, and (c) for two plastic targets with different backside curvatures (blue: infinite, and red: ...
5
Time-resolved measurements of fast electron recirculation for relativistically intense femtosecond scale laser-plasma interactions
... In this model of fast electron-driven Ohmic heating the speed and change in relectivity of the apparent radial expansion can be directly related to the electron transport inside the target foil. Assuming a ballistic ...
10
Time-resolved measurements of fast electron recirculation for relativistically intense femtosecond scale laser-plasma interactions
... In this model of fast electron-driven Ohmic heating the speed and change in reflectivity of the apparent radial expansion can be directly related to the electron transport inside the target foil. Assuming a ballistic ...
9
Micron-scale fast electron filaments and recirculation determined from rear-side optical emission in high-intensity laser-solid interactions
... The third term in equation (4) is the result of the Fourier transform of the transverse profile of the electron current [17, 25, 26]. It can be understood by analogy with classical diffraction in the far-field ...
12
Prediction of Noise in a Diesel Engine Using Sound Intensity Mappings.
... the rear side of the engine the following observations are ...the rear surface of the engine also the maximum noise is observed at the crank case region, same as the front ...
5
Ion acceleration with radiation pressure in quantum electrodynamic regimes
... the rear surface of the target in a process known as Target Normal Sheath Acceleration ...front surface, which are accelerated by the incident laser pulse, setting up a space charge on the ...
9
Demonstration of coherent terahertz transition radiation from relativistic laser-solid interactions
... In conclusion, we have demonstrated intense THz transition radiation of the laser-accelerated relativistic electron beams crossing the solid rear surface. The THz emissions from the mass-limited and ...
13
The energy absorption of modified foamed concrete with Rice Husk Ash subjected to impact loading
... the surface target, will be initiated within the linear elastic region of the stress-strain curve of the concrete ...target surface is not restrained, then this unrestrained surface condition ...
6
Intense terahertz radiation from relativistic laser–plasma interactions
... When the fast electrons cross the target rear surface, a strong sheath field will be established due to the transient charge separation, leading to the well-known TNSA. The time-varying dipole-like charge ...
14
An Investigation of the Mechanisms of Light-Induced Nickel Plating on P-type Silicon Substrates
... In the process of silicon solar cell production, the fabrication of plated Ni/Cu contacts is regarded as the next generation of metallization processes and has the potential to replace the screen-printing technology. In ...
11
DVD PLAYER CONTROLS (Except Armada and Pathfinder)
... turning the ignition to the ACC or ON position. Insert the disc into the slot. The disc is automatically drawn in. The player can be operated by using the control panel buttons or the remote control. The DVD player can ...
6
Analysis of Eddy Formation and Heat Transfer Process in Weld Pool during Plasma Keyhole Arc Welding
... the rear region. The weld pool in the rear region is formed through the heat transportation primarily due to the weld pool convection driven by Shear force, Marangoni force, Lorentz force and Buoyancy ...
17
Kinematics of twin rotary tiller
... The rear rotor is designed to handle upper soil ...the rear rotor, the position of the rotor above land surface, rotational rotor speed, tractor forward speed at desired sizes of slice pierсe in the ...
6
Development of surrogate child restraints for testing occupant sensing and classification systems
... For rear-facing applications, the belt can be routed under or over the thighs of the ATD, simulating typical convertible and rear-facing infant belt paths, ...
14
Tractor Rear Axle Casing
... fields. REAR AXLE CASING The rear axle is one of the components of the tractor which is present in the ...as Rear Axle. The rear axle casing is the outer cover of the rear ...the ...
6
Rifle Marksmanship MCRP 3 1A pdf
... All Marines share a common warfighting belief. The essence of this belief is captured by a simple yet powerful credo: “ Every Marine a rifleman.” In other words, every Marine, regardless of specialty, has a fundamental ...
211