• No results found

Residual analysis using reconstructed WASP-12 model

Analysis of a Residual Model for the Decomposition of Polarimetric SAR Data

Analysis of a Residual Model for the Decomposition of Polarimetric SAR Data

... generalized residual model is introduced to estimate f d and f s ...the residual model is analyzed. Eigenvalues computed from the residual model must be positive to ex- plain ...

7

Five transiting hot Jupiters discovered using WASP South, Euler, and TRAPPIST : WASP 119 b, WASP 124 b, WASP 126 b, WASP 129 b, and WASP 133 b

Five transiting hot Jupiters discovered using WASP South, Euler, and TRAPPIST : WASP 119 b, WASP 124 b, WASP 126 b, WASP 129 b, and WASP 133 b

... to model the WASP light curves and those obtained with the ExoPlanet-BB, NGTS and Gunn R ...our analysis are given in Table ...of WASP-126 A ( dγ dt = ...

8

Parameter uncertainty analysis for an operational hydrological model using residual based and limits of acceptability approaches

Parameter uncertainty analysis for an operational hydrological model using residual based and limits of acceptability approaches

... new model- ing framework mainly tailored for an operational ...timate model parameters from observations (Crawford and Linsley, ...sensitivity analysis concept of Hornberger and Spear (1981), and it ...

19

Analysis of spin orbit alignment in the WASP 32, WASP 38, and HAT P 27/WASP 40 systems

Analysis of spin orbit alignment in the WASP 32, WASP 38, and HAT P 27/WASP 40 systems

... Left: residual map of WASP-32 time-series CCFs with the model stellar spectrum ...RM analysis. Right: the best-fitting model for the time-variable planet feature has been subtracted, ...

14

Homogeneously derived transit timings for 17 exoplanets and reassessed TTV trends for WASP-12 and WASP-4

Homogeneously derived transit timings for 17 exoplanets and reassessed TTV trends for WASP-12 and WASP-4

... TTV analysis results, we need to dis- cuss the quality of the derived transit timing ...transit analysis pipeline differs in several important aspects from the standard methods applied ...noise using ...

20

A comparison of plaster, digital and reconstructed study model accuracy

A comparison of plaster, digital and reconstructed study model accuracy

... that analysis performed on virtual models was a valid as traditional plaster models for intra and inter arch ...available. Using CBCT obtained images a third party software such as Anatomage allows digital ...

82

Analysis of the Accuracy of Reconstructed Two Teeth Models Manufactured Using the 3DP and FDM Technologies

Analysis of the Accuracy of Reconstructed Two Teeth Models Manufactured Using the 3DP and FDM Technologies

... FDM is the most widely used additive technique in manufacturing medical replicas after stereolithography [21]. An FDM model is built of thin layers of thermoplastic wire similar to filaments (Fig. 2a). Filaments ...

10

A Statistical Analysis and Model of the Residual Value of Different Types of Heavy Construction Equipment

A Statistical Analysis and Model of the Residual Value of Different Types of Heavy Construction Equipment

... of residual values percent. The highest goodness-of-fit even using the plain models was achieved for small track excavators, large wheel and track loaders, integrated toolcarriers, middle-sized and large ...

292

Absolute parameters for AI Phoenicis using WASP photometry

Absolute parameters for AI Phoenicis using WASP photometry

... error analysis It is inappropriate to use the covariance matrix from the least- squares fit to estimate the standard errors on the model parame- ...calculated using a prayer-bead (residual ...

16

Residual Strength of Corroded Reinforced Concrete Beams Using an Adaptive Model Based on ANN

Residual Strength of Corroded Reinforced Concrete Beams Using an Adaptive Model Based on ANN

... regression analysis and analytical modeling techniques, though performing well in their respective applications, do not handle the non-linearity between independent variables and their target ...regression ...

14

Residual Analysis for Auto Correlated Econometric Model

Residual Analysis for Auto Correlated Econometric Model

... of residual analysis for an economic GDP ...series analysis and ARIMA method in particular—used here might be valuable only for a time se- ries that is stationery and it is much preferred and more ...

14

Model Checks Using Residual Marked Empirical Processes

Model Checks Using Residual Marked Empirical Processes

... OF RESIDUAL MARKED EMPIRICAL PROCESSES We have seen that the asymptotic null distribution of continuous functionals of R 1 n,w depends in a complicated way of the DGP and the specification under the ...regression ...

44

WASP South transiting exoplanets: WASP 130b, WASP 131b, WASP 132b, WASP 139b, WASP 140b, WASP 141b and WASP 142b

WASP South transiting exoplanets: WASP 130b, WASP 131b, WASP 132b, WASP 139b, WASP 140b, WASP 141b and WASP 142b

... eight WASP-South cameras can cover up to half the avail- able sky per year (south of declination +08 ◦ and avoiding the crowded galactic ...longest-period WASP dis- covery yet, a “warm Jupiter” at ...

19

WASP South hot Jupiters : WASP 178b, WASP 184b, WASP 185b & WASP 192b

WASP South hot Jupiters : WASP 178b, WASP 184b, WASP 185b & WASP 192b

... the WASP-South survey. WASP- 178b transits a V = ...stars WASP-184, WASP-185, and WASP-192 are all post-main- sequence G0 stars of ages 4–8 .... WASP-185b has an eccentric orbit ...

9

Automatic software correction of residual aberrations in reconstructed HRTEM exit waves of crystalline samples

Automatic software correction of residual aberrations in reconstructed HRTEM exit waves of crystalline samples

... The phase of the unobstructed region of the graphene grain boundary is plotted in Fig. 6b, c for the uncorrected and corrected exit waves respectively. Before aberration correction, we observe that the graphene lattices ...

10

Residual stress evaluation using XRD and failure analysis

Residual stress evaluation using XRD and failure analysis

... X-ray diffrac- tion based technique for the evaluation of residual stress is non-destruc- tive and determines the nature and magnitude of both macro and micro surface stress.. It is base[r] ...

7

Generation Planning using WASP Software

Generation Planning using WASP Software

... 1. Wasp panel After entering the information on loads and existing units and the units added to the development plan, we proceed to the first 3 modules, to the second 3 modules, which relate to the decision on ...

6

Three WASP south transiting exoplanets : WASP 74b, WASP 83b, and WASP 89b

Three WASP south transiting exoplanets : WASP 74b, WASP 83b, and WASP 89b

... by WASP-South together with the TRAPPIST photometer and the Euler/CORALIE ...spectrograph. WASP-74b orbits a star of V = ...star. WASP-83b is a Saturn-mass planet at ...star. WASP-89b is a 6 M ...

9

Residual Stress Analysis For Axisymmetric Welded Cone & Tee Assembly Model

Residual Stress Analysis For Axisymmetric Welded Cone & Tee Assembly Model

... axisymmetric model is used for the Finite Element Analysis, shown as Figure ...Assembly model of Figure 2.1. Main difference between a full 3D model and a 2D axisymmetric model is the ...

102

WASP 52b, WASP 58b, WASP 59b, and WASP 60b : four new transiting close in giant planets

WASP 52b, WASP 58b, WASP 59b, and WASP 60b : four new transiting close in giant planets

... planets, WASP-52b, WASP-58b, WASP-59b, and WASP-60b, have orbital periods ranging from ...radii, WASP-52b and WASP-58b are new cases of low-density, inflated planets, whereas ...

11

Show all 10000 documents...

Related subjects