solid interface
Interphase of a polymer at a solid interface
... 3 Enhanced Dynamic Light Scattering (REDLS), experiments on polybutadiene [11] showed a slowing-down in dynamics, and hence an increase in viscosity going to films below 25 nm in thickness. This is explained in terms of ...
26
Reflection and transmission of elastic waves at viscous liquid/micropolar elastic solid interface
... 3.3. Special case. It can be easily verified that neglecting the viscous effect of the liquid, that is, putting η = 0 in the boundary conditions given by (3.8a), one can obtain the same equations as obtained by Tomar and ...
10
Antireflection Property of a Periodic Nanocone Structured Solid-Solid Interface.
... between solid-solid interfaces is not ...air-solid interface can be easily ...between solid-solid interfaces, providing an ...
69
Self-assembly of 1,3,5-benzenetribenzoic acid on Ag and Cu at the liquid/solid interface
... H3BTB on Ag marks an interesting point in the design of SAMs. The geometry of the molecule and its arrangement on the surface, characterised by a monopodal anchoring to the substrate and the formation of a row structure ...
11
Propagation of P and SV Waves through Loosely Bonded Solid/Solid Interface
... The ordinary classical theory of elasticity fails to describe the microstructure of the material. To tackle this problem, Suhubi and Eringen (1964), Eringen and Suhubi (1964) developed a theory in which they considered ...
13
Self-assembled monolayers of oligophenylenecarboxylic acids on silver formed at the liquid-solid interface
... (a) Large scale image with differently orientated domains of the α-phase indicated by dotted lines. (b) Image showing co- existence of α and β phases. Phase boundaries are marked by dashed lines. Arrows highlight rows of ...
18
Self assembled monolayers of oligophenylenecarboxylic acids on silver formed at the liquid solid interface
... The less abundant -phase, seen in Fig. 2b adjacent to the -phase, exhibits a more complex structure. Highlighted by white arrows, rows of bright protrusions separated by 1 nm run along the <112¯> direction. A ...
18
Sequential nested assembly at the liquid/solid interface
... for the solid/liquid interface where the adsorption of species involves an exchange of solvent molecules. The studies reported here build on our previous work where, in experiments examining a series of ...
10
Propagation of Waves at Loosely Interface Between Solid Media
... viscoelastic solid half space with ...an interface between liquid and micropolar viscoelastic solid with ...bonded solid-solid ...loosely interface of viscoelastic solid ...
15
Neutron reflectivity for soft matter
... for solid samples, the surface curvature has also to be ...common solid substrates used in neutron reflectometry are sapphire, quartz crystals and silicon ...on solid substrates in soft matter, both ...
27
Presentation of a New Methodology of Chained Computations using Instationary 3D Approaches for the Determination of Thermal Fatigue in a T Junction of a PWR Nuclear Plant (C492)
... The results of our simulation will now be compared to experimental data taken from on-site measurements. It should yet be underlined that on-site recording of the temperature inside the pipe is not possible. Hence, the ...
8
Solid liquid Interface Energy of Metals at Melting Point and Undercooled State
... the solid-liquid interface energy of metals at melting point and undercooled state has been devel- ...The solid-liquid interface energy for metals decreases with increasing ...the ...
6
Wave Propagation at an Interface of Heat Conducting Micropolar Solid (Viscoelastic) and Fluid Media Nidhi Sharma 1, Rajneesh Kumar2 , Balwinder Kumar 3
... an interface of micropolar generalized viscothermoelastic solid half space and heat conducting micropolar fluid half ...plane interface between a micropolar generalized viscothermoelastic ...
24
Fabrication and Characterization of a Conductive Proton Exchange Membrane Based on Sulfonated Polystyrenedivinylbenzene Resin-Polyethylene (SPSDR-PE): Application in Direct Methanol Fuel Cells
... Methanol can be used as fuel in solid electrolyte fuel cells, thus measuring methanol permeability is one of the key parameters to evaluate the AEM for fuel cells application. Methanol permeability is the product ...
12
Stoneley Waves At The Interface Of Thermoelastic Diffusion Solid And Microstretch Thermoelastic Diffusion Solid
... http://www.ijmr.net.in email id- [email protected] Page 352 thermoelastic diffusion media.Abd-Alla, Khan, and Abo-Dahab[3] and Kumar and Kansal [4] investigated various problems surface waves in viscoelastic ...
21
Effect of Loosely Bonded Interface on Wave Propagation Between Solid Media
... of solid (S) and fluid (F) phases of the porous aggregate and p is the effective pore pressure of the incompressible pore ...the solid and fluid phases respectively and b is the body force per unit ...the ...
14
Ultrasonic reflection from mixed liquid-solid contacts and the determination of interface stiffness
... An ultrasonic pulser-receiver (UPR) was used to generate voltage pulses to actuate the piezo-electric transducer. The transducer, a longitudinal-wave 10 MHz in this case, is connected to the UPR. The voltage causes a ...
9
Surfactants at the solid-liquid interface: Measurements at higher concentrations using optical reflectometry
... If the bulk solution is inhomogeneous, especially adjacent to the silica surface, then the assumptions for our two-part description of the OR will be invalid. The OR will be very sensitive to any local inhomogeniety near ...
23
Behaviour of a shear-wave at a solid-smectic interface
... plane interface between the smectic and an isotropic elastic solid such that the wave first propagates through the solid then undergoes a reflection and refraction on contact with the ...
10
Interface Formation and Phase Distribution Induced by Co/SiC Solid State Reactions
... The study of metal-ceramic interfacial bonding and its re- actions is of great interest in materials science because of the technological applications of devices fabricated from both metal and ceramic components. 1–4) ...
6