• No results found

Split Tensile Strength

EFFECT OF DIFFERENT TYPES OF STEEL FIBER ON THE SPLIT TENSILE STRENGTH OF SFRC CYLINDRICAL SPECIMENS

EFFECT OF DIFFERENT TYPES OF STEEL FIBER ON THE SPLIT TENSILE STRENGTH OF SFRC CYLINDRICAL SPECIMENS

... reinforced concrete (SFRC) was investigated. Different types of steel fiber i.e. hooked end fiber of aspect ratio 60 and 75 and crimped rounded steel fiber of aspect ratio 75 were used. These fibers were added in the ...

6

Effect of Magnetic Water on Split Tensile Strength and Flexural Strength of M25 Concrete

Effect of Magnetic Water on Split Tensile Strength and Flexural Strength of M25 Concrete

... in strength of ...the strength of ...as split tensile strength and flexural strength of M25 grade ...in split tensile strength by 44% after 7 days of curing ...

7

Compressive and Split Tensile Strength of Chopped Basalt Fiber Concrete

Compressive and Split Tensile Strength of Chopped Basalt Fiber Concrete

... This test is conducted as recommended in IS 5816:1999.The dimensions of cylinder is 300 mm in length and 150 mm in diameter. The specimen were kept in water for curing for the period of 7, 14 and 28 days and then tested. ...

5

To Study the Variation in Compressive and Split Tensile Strength of Concrete by Using Various Binders

To Study the Variation in Compressive and Split Tensile Strength of Concrete by Using Various Binders

... like strength and ...the strength properties is substitution of cement by other materials possessing similar properties ...ultimate strength, high impermeability and high corrosion ...

8

A Comparative of the Study on Mechanical Strength Properties by Replacing Cement with Rice Husk Ash

A Comparative of the Study on Mechanical Strength Properties by Replacing Cement with Rice Husk Ash

... 2) Split Tensile Strength of Cylinders: Determining the tensile strength of the concrete member is necessary to determine the load at which the concrete member may ...failure. ...

5

Analysis of Behaviour of Rice Husk Ash Cement Concrete on Addition of Polypropylene Fiber

Analysis of Behaviour of Rice Husk Ash Cement Concrete on Addition of Polypropylene Fiber

... and split tensile strength of M20 ...maximum strength value by plotting the test result of cube for compressive strength test and cylinder for split tensile ...

5

Experimental Study on Utilization of Red Mud and Used Foundry Sand in Cement Concrete

Experimental Study on Utilization of Red Mud and Used Foundry Sand in Cement Concrete

... possibility of replacing the part of Portland cement by Red mud and Fine Aggregates by Used foundry sand. Because of storing issues, the waste negatively affects the environment. To solve this problem, an attempt was ...

6

Studies on Geopolymer Concrete with GGBS as Partial Replacement to Fly Ash

Studies on Geopolymer Concrete with GGBS as Partial Replacement to Fly Ash

... the split tensile strength increases with increase in the molarity of the alkaline solution and portion of GGBS in fly ...maximum split tensile strength is achieved for 12M ...

7

A Study on the Mechanical Properties of Concrete by Replacing Sand with Waste Foundry Sand

A Study on the Mechanical Properties of Concrete by Replacing Sand with Waste Foundry Sand

... iii. Split Tensile Strength : Cylinder specimens were tested for splitting tensile ...splitting tensile strength of various concrete mixtures over plain concrete is also ...

6

EFFECT ON STRENGTH PROPERTIES OF CONCRETE BY USING WASTE WOOD ASH AS PARTIAL REPLACEMENT OF CEMENT

EFFECT ON STRENGTH PROPERTIES OF CONCRETE BY USING WASTE WOOD ASH AS PARTIAL REPLACEMENT OF CEMENT

... compressive strength of 20 ...For split tensile strength test, cylinders were casted with diameter being15 cm and height being 30 cm for ...

6

A PROFICIENT LOW COMPLEXITY ALGORITHM FOR PREEMINENT TASK SCHEDULING INTENDED 
FOR HETEROGENEOUS ENVIRONMENT

A PROFICIENT LOW COMPLEXITY ALGORITHM FOR PREEMINENT TASK SCHEDULING INTENDED FOR HETEROGENEOUS ENVIRONMENT

... that split tensile strength and strength of concrete value is low compared to normal concrete when the recycled coarse aggregate is replaced upto ...the split tensile ...

7

Study on the performance and durability of hemp concrete

Study on the performance and durability of hemp concrete

... Compressive Strength for Concrete and S plit Tensile Strength for Concrete and Flexural Strength for Concrete have been ...compressive Strength value at 28 days 12.8%, and the ...

7

Investigating Mechanical Properties of Animal Bone Powder Partially Replaced Cement in Concrete Production

Investigating Mechanical Properties of Animal Bone Powder Partially Replaced Cement in Concrete Production

... compressive strength, split tensile strength and flexural strength at different ...and split tensile strengths for 0%, 5%, 10%, 15% & 20% replacement of cement by ABP ...

14

Experimental Investigation on Characteristics of Polythene Waste Incorporated Concrete

Experimental Investigation on Characteristics of Polythene Waste Incorporated Concrete

... compressive strength and Split tensile strength and flexural strength shows that an appreciable improvement in tensile strength of concrete can be achieved by introducing ...

6

Studies on Self Compacting Fuel Dispenser Hose Pipe Rubber in Concrete

Studies on Self Compacting Fuel Dispenser Hose Pipe Rubber in Concrete

... To cast concrete cubes specimen of size 100× 100 ×100 and to test the harden cube on 28 days under compression. To cast concrete cylinder specimen of size 100× 200 and to test the harden cylinder on 28 days under ...

8

Experimental Investigation on Concrete Considering Different Types of Steel Fibers

Experimental Investigation on Concrete Considering Different Types of Steel Fibers

... The present work is made to investigate experimentally and the following test are carried out, namely Cubes (150mm*150mm*150m) for Compressive strength, Cylinder (300mm*150mm) for Split Tensile ...

8

A Study of Strength and Cost Analysis in Concrete Using Copper Slag

A Study of Strength and Cost Analysis in Concrete Using Copper Slag

...  Replacement of copper slag increases the self weight of concrete specimens to the maximum of 15 to 20%.  For higher replacement of copper slag in cement (greater than 20%) the compressive strength decreases.  ...

12

Effect of Rapid Fluctuation in Temperature on Hybrid Fibre Reinforced Concrete

Effect of Rapid Fluctuation in Temperature on Hybrid Fibre Reinforced Concrete

... normal strength concrete mix sample by addition of polypropylene fibre (PP) at a fixed percentage ...and split tensile strength test, UPV test before and after exposure to heat to determine ...

8

Exploring the Impact of Work Life Balance on the Employee and Organisational Growth

Exploring the Impact of Work Life Balance on the Employee and Organisational Growth

... compressive strength, flexural strength, split tensile ...In split tensile strength of the cylinder and beam flexural strength the maximum tensile ...

5

Experimental study on strength properties of metakaolin and 
		GGBS based 
		geopolymer concrete

Experimental study on strength properties of metakaolin and GGBS based geopolymer concrete

... Energy saving in building technology is among the most critical problems in the world. Thus it is a need to develop sustainable alternative to conventional concrete utilizing more environmental friendly materials. One of ...

9

Show all 10000 documents...

Related subjects