• No results found

Side surface irregularities (left) and top surface irregularities (right). The surface

Analysis of flow through rectangular mini channel with surface irregularities

Analysis of flow through rectangular mini channel with surface irregularities

... smooth surface geometry and ...with surface irregularities have been benchmarked with theoretical ...of surface irregularities in defining the domain of analysis while performing ...

6

Numerical Computations of Hypersonic Boundary-Layer over Surface Irregularities

Numerical Computations of Hypersonic Boundary-Layer over Surface Irregularities

... 23681 Surface irregularities such as protuberances inside a hypersonic boundary layer may lead to premature transition on the vehicle ...localized surface heating that could damage the thermal ...

22

Quantitative assessment of carotid plaque surface irregularities and correlation to cerebrovascular symptoms

Quantitative assessment of carotid plaque surface irregularities and correlation to cerebrovascular symptoms

... the surface irregularity indices across image ...plaque surface irregularities was also performed by an experienced vascular scientist, off-line and blinded to patient clinical history, classifying ...

8

The vibrations induced by surface irregularities in road pavements – a Matlab® approach

The vibrations induced by surface irregularities in road pavements – a Matlab® approach

... 7 Conclusions Road infrastructures, and therefore vehicular traffic flow, in many cases, develop near historical buildings, with artistic and architectural values. Inevitable consequence of the dynamic interaction ...

9

Development of a smartphone application to measure pavement roughness and to identify surface irregularities

Development of a smartphone application to measure pavement roughness and to identify surface irregularities

... pavement surface distress detection and maintenance are very important for safety and for the control of further damage to pavements, as repair costs tend to increase exponentially with time when maintenance is ...

171

Recognition of Surface Irregularities on Roads: a machine learning approach on 3D models

Recognition of Surface Irregularities on Roads: a machine learning approach on 3D models

... describe surface geometry around a point without taking into account the complete geometry of the object the point belongs ...geometry surface analysis (type of object, shape, ...

11

Ride quality due to road surface irregularities: Comparison of different methods applied on a set of real road profiles

Ride quality due to road surface irregularities: Comparison of different methods applied on a set of real road profiles

... Received: 28 February 2017; Accepted: 19 April 2017; Published: 26 April 2017 Abstract: Road roughness evaluation can be carried out using different approaches. Among these, the assessment of ride quality level perceived ...

16

Investigating the influence of topographic irregularities and two-dimensional effects on surface ground motion intensity with one- and two-dimensional analyses

Investigating the influence of topographic irregularities and two-dimensional effects on surface ground motion intensity with one- and two-dimensional analyses

... Field Elevation (m) In section 4, it is observed that the results of the one and two dimensional analyses are more compatible in comparison to the other sections. In the two-dimensional analysis, the beginning of the ...

16

over the top several meters of the earth’s surface is the

over the top several meters of the earth’s surface is the

... as surface temperature and evapotrans- from the soil surface, the Theta Probe provided an average piration, for evaluation of the soil moisture ...the top 6 cm of soil, while To overcome such ...

7

Geomagnetic jerks from the Earth’s surface to the top of the core

Geomagnetic jerks from the Earth’s surface to the top of the core

... Figure 4 shows, from left to right, maps obtained for two periods corresponding to the two S(t ) maxima representa- tive of the 1978 event (e.g. 1977.0–1978.0 and 1980.0– 1981.0). Both panels show that this event is not ...

10

Micro-Irregularities of Metal Surfaces

Micro-Irregularities of Metal Surfaces

... a surface with complex 3D shapes ...the surface roughness should be ...to surface quality are ...of irregularities when a machined surface is subjected to further treatment are also of ...

12

Solid Surface Top Table

Solid Surface Top Table

... Solid Surface, West Elm, always use a cutting board. Discover daily dose of? That stewardship begins in the initial conversations about wants and needs, carefully crafted from the finest quality materials to be ...

10

AUTOMATIC OPERATORS SURFACE MOUNTED PULL SIDE

AUTOMATIC OPERATORS SURFACE MOUNTED PULL SIDE

... 6” Surface and Flush mounts WALL MOUNTED ACTUATOR, 8310-852 Hardwired low voltage actuator with round, stainless steel touch plate in 6” (152mm) ...or surface mount box (sold separately) in/on a vertical ...

136

Lower ionospheric irregularities

Lower ionospheric irregularities

... horizontal surface using an ordinary 35 ...horizontal surface was ruled in lines parallel to the time axis of film and the phase height of any given phase coherent echo could be found by algebraically ...

193

Side Flow Effect on Surface Generation in Nano Cutting

Side Flow Effect on Surface Generation in Nano Cutting

... cutting, Side flow, Surface generation, Plastic deformation, Cutting mechanism Background Ultra-precision cutting is one of the most common methods in realizing the nanometric surface rough- ness and ...

11

Water damage mechanism of surface and downstream side of spur dike

Water damage mechanism of surface and downstream side of spur dike

... dike surface and downstream slope is found through analysing the field investigation and experimental ...dike surface and downstream slope, and then observe the process of washout, so that reveals its ...

6

SURFACE APPLIED TACTILE / DETECTABLE WARNING SURFACE TILES (Rectangular and Radius Surface Applied Tiles)

SURFACE APPLIED TACTILE / DETECTABLE WARNING SURFACE TILES (Rectangular and Radius Surface Applied Tiles)

... C. Domes: Square grid pattern of raised truncated domes of 0.2”nominal height, base diameter of 0.9” and top diameter of 0.45”. The Federal Code of Regulations permits a truncated dome spacing range of 1.6”-2.4.” ...

8

A dense surface modelling technique for foot surface imaging

A dense surface modelling technique for foot surface imaging

... 3 METHODOLOGY 3.1 Camera Calibration and Test-Subject Imaging The selected high definition (HD) video cameras were calibrated individually using a custom- made camera calibration testfield at an object distance of 1000 ...

8

"Scattered surface charge density: A tool for surface characterization"

"Scattered surface charge density: A tool for surface characterization"

... the top and bottom Si dimer atoms are combined to reflect the experimental conditions, where the measurements are made along the middle of the dimer row (top of ...

6

Optimization of the Surface Structure on Black Silicon for Surface Passivation

Optimization of the Surface Structure on Black Silicon for Surface Passivation

... high surface recombination velocity limits the efficiency of solar ...rear side, single-side black silicon was obtained on n-type solar grade silicon ...the surface but also increases the ...

7

Show all 10000 documents...

Related subjects