Temperature and Strain Rate
The Shear Response of Beryllium as a Function of Temperature and Strain Rate
... with strain control such that the sample could be immediately unloaded at the onset of sample ...elevated temperature tests, the samples were held at the test temperature for a minimum of ten minutes ...
6
Effects of temperature and strain rate on commercial aluminum alloy AA5083
... different strain rates and ...various strain rate from ...wide temperature range from ambient to ...increasing strain rate increases flow stress, while increasing ...
5
Effect of temperature and strain rate on the compressive behaviour of supramolecular polyurethane
... the temperature of 50 ◦ C for half hour with the diameter of 5mm and thickness of about ...high rate test systems, in order to provide adequate strain gage signals and improve the time taken to reach ...
5
Strain rate and temperature dependent mechanical behavior of nanocrystalline gold
... of strain rates 10 -5 –10 s -1 and temperatures 298–383 ...different temperature and strain rate ranges as the means to identify thermally activated mechanisms responsible for inelastic ...
112
Effect of Temperature and Strain rate on Flow behavior of Al0.3CoCrFeNi HEA
... quasi-static strain rate region under temperatures ranging from cryogenic to room temperatures ...room temperature most of the HEAs have low ductility limits the ...high strain rate ...
63
Effects of Strain Rate and Temperature on the Deformation and Fracture Behaviour of Titanium Alloy
... alloy, strain rate and temperature effects, deformation behaviour, adiabatic ...operating temperature and applied strain ...the temperature and time-dependent aspects of the ...
9
Effect of Strain Rate and Temperature on Fracture and Damage of Magnesium Alloy AZ31B
... low temperature compared to aluminum and ...of temperature and strain rate on damage and fracture remain ...various strain rates and temperatures was performed with this ...
107
Influences of Temperature and Strain Rate on Mechanical Behavior of a Cu45Zr45Al5Ag5 Bulk Glassy Alloy
... of temperature and strain rate on the mechanical properties of a Cu 45 Zr 45 Al 5 Ag 5 bulk glassy alloy fabricated by high pressure die casting ...at strain rates from 5 10 5 to 5 10 3 s 1 ...
5
Flow and failure of an aluminium alloy from low to high temperature and strain rate
... low strain rates using a servo-hydraulic machine. High strain rate tests have been carried out using the same geometry in a Hopkinson Split Tensile ...low temperature were performed using a ...
6
Effect of Temperature and Strain Rate on the Hot Deformation Behaviour of Ferritic Stainless Steel
... plain strain compression test with a true strain of 90% in the temperature range of 850-1100 °C and strain rate of ...high strain rate, which was caused by the coupling ...
20
Effect of Strain Rate and Temperature on Tensile Properties of Bi Based Lead Free Solder
... In this study, pure Bi and Bi alloys with addition of Sn or Ge or Ag are focused as lead-free high-melting point solder. The addition of Sn is expected to suppress excessive Ni disso- lution in the solder joint with Ni ...
8
Effect of Temperature and Strain Rate on Deformation Behavior of Zirconium Alloy: Zr-2.5Nb-0.5Cu
... the temperature and strain rate range of 700 to 925 o C and ...at temperature of around 750 o C and strain rate of 1×10 -2 s -1 , in (α +β) phase ...at temperature range ...
6
Effect of Strain Rate and Temperature on Micro Fatigue Crack Propagation of Bi Sn Eutectic Alloy
... low strain rates 3) ...alloys strain-rate dependence that af- fects fatigue reliability is ...by temperature and strain rate 4,5) ...of strain rate and ...
7
Analysing the effect of strain rate and temperature on the flow stress in AA1050 sheet using E-2448 standard
... optimum temperature and strain rate for forming the AA1050 ...elevated temperature, which in turn, they can change the mechanical properties of the ...material. Strain rate and ...
7
Influence of Strain Rate and Temperature of Hot Tension Testing on Mechanical Properties of Medium Carbon Steel S48C
... of Strain Rate and Temperature of Hot Tension Testing on Mechanical Properties of Medium Carbon Steel ...of temperature and strain rate for S48C flow stress, that close ...
6
Analysing the effect of strain rate and temperature on the flow stress in AA1050 sheet using E-2448 standard
... optimum temperature and strain rate for forming the AA1050 ...elevated temperature, which in turn, they can change the mechanical properties of the ...material. Strain rate and ...
8
Temperature and strain rate dependent mechanical response of METCO 601 aluminium-polyester abradable seal coating
... imposed strain rate of 1·10 -3 s -1 and at temperatures of 298 K, 373 K and 573 K in order to determine the sensitivity of the mechanical response of the material to ...macroscopic strain field and ...
6
Temperature, Strain and Strain Rate Dependence of Serrated Flow in Bulk Metallic Glasses
... (Received December 19, 2006; Accepted January 22, 2007; Published June 25, 2007) Keywords: bulk metallic glasses, serrated flow, deformation kinetics, shear band relaxation, strain rate sensitivity 1. ...
7
Strain-Rate Dependence of the Brittle-to-Ductile Transition Temperature in TiAl
... Transition Temperature in TiAl Abstract The brittle-to-ductile transition (BDT) and the strain-rate dependence of the brittle-to-ductile transition temperature (BDTT) have been recently ...
8
Influence of the temperature on the tension behaviour of EUROFER97 alloy at high strain rate
... the temperature on the reduced activation steel Eurofer97 under uniaxial tensile loads at high strain ...high strain rates (300 s − 1 , 1000 s − 1 ) ...high strain rate were carried out ...
6