thermal performances
THERMAL PERFORMANCES OF DIFFERENT TYPES OF UNDERGROUND HEAT EXCHANGERS
... the thermal properties of the ground will be ...for thermal conductivity (Table ...lower thermal conductivity than moist packed ...soil thermal properties, soil moisture content and ...
41
Investigation of Hydraulic and Thermal Performances of Fin Array at Different Shield Positions without By pass
... The constant demand for speed and performance in electronics is unfortunately accompanied by ever increasing thermal dissipation. Air heat exchangers or heat sinks continue to be the most viable thermal ...
7
Study of the parameters influencing the thermal performances of an earth to air heat exchanger used in cooling mode
... good thermal design of the building, the EAHE can eliminate the need for active mechanical and air-conditioning units in buildings, which will result in a major reduction in electricity consumption of a building ...
9
Influence of Geometric Parameters on the Thermal Performances of a Double Air Pass Solar Collector
... The studied air solar collector has two glasses, upper glass (3) and lower glass (5) as cover, an absorber plate (7) and an insulating material (9). The two glasses are separated by an air layer (4) that promotes the ...
10
Influence of the Addition of Sand and Compaction on the Mechanical and Thermal Performances of Plaster
... and thermal chara- cteristics is obtained for the mortar called M2, despite its decreased thermal performance; it is the mortar that marked the better thermal performance and gives an ac- ceptable ...
5
Exergo economic optimization of the operation of a heat exchanger subjected to fouling
... the thermal performances of the exchanger, which involves the increase in resistance to the transfer of the heat flow, of the pressure losses as well as operational costs related to the faulty operation of ...
7
Thermal Tests Of A CP5.2 Packaging System: Prototype and Experimental Test Description
... The integrity is a crucial aspect in the design of these systems; to certify it packages should demonstrate to withstand loads, that could occur under normal and accident conditions, and to meet the safety requirements ...
11
Numerical Study of a Confined Axisymmetric Jet Impingement Heat Transfer with Nanofluids
... investigated. The flow is turbulent and a constant heat flux is applied on the heated plate. A two-phase mixture model approach has been adopted. Different nozzle-to-plate distance, nanoparticle volume concentrations and ...
6
Courtyard as a passive cooling strategy in buildings
... indoor thermal comfort in Universiti Teknologi Malaysia (UTM) ...their thermal performances is required, and future simulation studies can predict a better design requirement for optimum ...
8
Fuel Managements for an Orgel Prototype Orientation Study EUR 4204
... At fixed mean maximum cladding temperature of the fuel element and fixed maximum coolant entrance velocity, the thermal performances of the core will slightly change as to yield the ther[r] ...
42
Carbon ammonia pairs for adsorption refrigeration applications : ice making, air conditioning and heat pumping
... Abstract – A thermodynamic cycle model is used to select an optimum adsorbent-refrigerant pair in respect of a chosen figure of merit that could be the cooling production (MJ m -3 ), the heating production (MJ m -3 ) or ...
39
Application of Pitch-based Carbon Fiber in Flexible Heatsinks.
... better thermal performance and coefficient of thermal expansion was lower than conventional copper heat sinks by about 25% [56] ...their thermal performances in power electronic ...anisotropic ...
124
The Effect of Indoor Thermal Comfort on Visual Search Task Performances in a Personal Learning Environment
... indoor thermal environment, based on the participants’ ...perceived thermal sensitivity (PTS) as an extraneous variable in the impact of comfort sensation on learning task performance ...
7
Effect of CuI Anode Buffer Layer on the Growth of Polymers Thin Films and on the Performances of Organic Solar Cells
... duces more flexibility in the polymeric chains and a lost of conjugation due to the decrease of quinoids and het- eroaryl units. Moreover, aniline-thiophene units show more thermal stability in a greater range of ...
11
The Objective Ear: assessing the progress of a music task
... We define the Objective Ear as an agent that takes as input a pair of performances of a piece of music and returns an accurate and reliable classification of the progress made between the two performances. ...
9
Megaship Economies and Transnational Maritime Performance
... Land-based entertainments tend to privilege indoor professional performances over spontaneous or amateur acts, yet this is not the case on a tourist cruise. The journey is the destination and all passenger/staff ...
17
Affordances of vibrations in performances and composition
... The excitation of motorised vibrations has typically been used within performance environments to either inform per- formers of relevant system functions or as a mode of infor- mation exchange between performers. In this ...
6
PERFORMANCES OF YOUNG ATHLETES IN SPORTS
... Hence, the objectives of this study were: (a) to determine the prevalence of sports supplements, (b) to determine source of information regarding supplementation, (c) to a[r] ...
9
Performances of the post New Order
... 1: Performing regional, national, 'Indonesian' identities 19 Otonomi daerah and the arts 27 New centres, new paradigms: Forum Teater Se-Sumatera 33 Regional identity, randai and reformas[r] ...
294
Writing performance : on relations between texts and performances
... dangerous elements of the performances of Marina and Ulay. In the other space, the exhibition space, there was a large projection of a film and that film was recorded in that same space – the exhibition space. You ...
180