• No results found

A Review on Reconfigurable Integrated Filter and Antenna

N/A
N/A
Protected

Academic year: 2020

Share "A Review on Reconfigurable Integrated Filter and Antenna"

Copied!
11
0
0

Loading.... (view fulltext now)

Full text

Figure

Table 1. Comparison of different tunable device technologies [26, 27].
Figure 2. Fabricated reconfigurable filter blocks with narrowband stubs [38].
Figure 3.Designed two-pole bandstop filter(separated into three sections for illustration) [45].
Table 2. Summary of tunable microstrip filters of several researchers.
+3

References

Related documents

FEKO Simulator software used to design and simulate the microstrip patch antenna, and it also used for computing and plotting return Loss, VSWR, bandwidth, gain and impedance.. We

S., “Application of sequential feeding to wide bandwidth circularly polarized microstrip patch arrays,” IEE Proceedings H Microwave, Antenna and Propagation , Vol. Lu, “2 ×

KEYWORDS: Reconfigurable, Switching, Microstrip patch antenna, dual band, Split Ring Resonator, High

This paper present Design and simulation of E and S Stacked microstrip patch antenna for overcome the limitation of bandwidth of the microstrip patch antenna

Keywords: UWB, rectangular stair slot antenna, return loss, Bandwidth enhancement, radiation pattern, microwave

This designed simple microstrip Rectangle shape patch antenna is given return loss -29.70 dB at the frequency 3.3 GHz with bandwidth 140 MHz and the same antenna with

Considering the rectangular patch antenna using microstrip line feed, the radiation from microstrip patch antenna can be found from the patch spaced of a wavelength above a

Fig.8 shows the Return loss and Impedance Bandwidth of Rectangular microstrip Patch Antenna with proposed metamaterial structure... IJER@2012 Page 42 Figure 8: Simulation