Cuprate based materials for SOFC cathodes
Investigation and Improvement of SofC Composite Cathodes
... La0.8Sr0.2FeO3 (LSF), and La0.8Ba0.2FeO3 (LBF) into porous YSZ scaffolds. Although ionic conductivity varied by over an order of magnitude, no significant difference was observed in the performance of each material, ...
171
Zirconia based electroceramic materials for SOFC applications
... For ideal elements, the value o f the resistance obtained by the two methods should be equal. It is, however, more usual for materials to give non-ideal responses. The semi-circles produced in the complex ...
259
Cone-Shaped Gd1-xSrxFe0.8Co0.2O3-δ Electrodes for SOFC Cathodes
... Received: 19 August 2017 / Accepted: 15 September 2017 / Published: 12 November 2017 Five Gd 1-x Sr x Fe 0.8 Co 0.2 O 3- perovskites were synthesized using the glycine-nitrate process. The compounds were evaluated as ...
6
A Review on Cuprate Based Superconducting Materials Including Characteristics and Applications
... The cuprate based superconducting material can be used to make many kinds of active microwave ...is based on the breaking of the Cooper pairs by absorption of IR ...
18
Synthesis and pulsed laser deposition of lead-based cuprate superconducting materials
... lead based cuprates, im provem ents in the superconducting properties have been achieved by changing preparation conditions such as high oxygen pressure, low oxygen am bient or partial m elt processing [1, 2, 3, ...
264
Improving Performance Of Infiltrated Sofc Cathodes Via Scaffold Engineering And Catalyst Surface Engineering
... 5 There are a number of factors that can contribute to the total cell resistance. The resistance due to transport of the charge carriers, primarily the ions moving through the electrolyte, is always present and is ...
160
Modelling of Perovskite based materials for intermediate temperature solid oxide fuel cell cathodes
... the materials currently used for components for SOFCs, and devel- opment of alternative materials have been considered as methods of improving their ...improved materials for intermediate tempera- ...
216
Thermal Insitu Analyses of Multicomponent Pyrophosphate Cathodes Materials
... batteries based on abundant and inexpensive elements are ...cathode materials for NIBs have been designed and studied to meet the challenging ...pyrophosphate cathodes have shown promising ...
10
Highly dense and novel proton conducting materials for SOFC electrolyte
... 4. Conclusions The BaCeO 3 -BaZrO 3 based samarium, yttrium doped novel materials of BCZYS adding 4 wt. % ZnO as sintering aid have been successfully prepared at 1350 o C. This temperature is lower than the ...
37
Preparation for Graphite Materials and Study on Electrochemical Degradation of Phenol by Graphite Cathodes
... The sulfur-free expanded graphite has been reported [2], for the better quality. Nanographite also with unique che- mical and physical structure exhibits good thermal and electrical conductivity, inertness and ...
6
Binder materials for the cathodes applied to self stratifying membraneless microbial fuel cell
... PTFE-based cathodes. The low cost and biocompatibility of PVA further support that conclusion. Unfortunately, their stability over time was low and their production protocol would need to be further ...
6
Ni-GDC anode for GDC electrolyte-based IT-SOFC
... Palabras clave: CeO 2 -Gd 2 O 3 , Ni-CGO cermet, compatibilidad química, compatibilidad termomecánica. Ni-GDC anode for GDC electrolyte-based IT-SOFC The purpose of this work is to investigate the possible ...
5
Advanced Nanofiber-Based Lithium-Ion Battery Cathodes.
... cathode materials for rechargeable LIBs and to determine the effect of fabrication parameters including carbon amount, carbon coating thickness, stabilization and carbonization temperature, ...
226
Development of Novel Anode material for Intermediate Temperature SOFC (IT SOFC)
... of SOFC. 5-9 The weaknesses of the nickel cermet based anode under operating conditions prompted large scale research on the development of novel oxide ceramic based anode ...anode materials ...
10
Carbon based air breathing cathodes for microbial fuel cells
... The same order was followed by the electrodes prepared with MPL and the different supporting materials, being CF + MPL was the electrode producing the highest current density, followed by the CC + MPL and by the ...
13
Advances in lithium sulfur batteries based on multifunctional cathodes and electrolytes
... batteries based on multifunctional cathodes and electrolytes Quan Pang † , Xiao Liang † , Chun Yuen Kwok † and Linda ...host materials and ...recent materials engineering, especially for high ...
11
Specific Heat and Entropy of a Three Electron Model in Bismuth Based Cuprate Superconductor
... are resistant to water or humid atmosphere and have the advantage of compositional / oxygen stability, e.g. some of its superconducting phases do not gain or lose oxygen, when the material is annealed at 850°C [12]. ...
6
Production of single cell anode supported SOFC using NiO/YSZ YSZ LSM/YSZ powder materials
... 3. Xiuqin Zhang, Huiying Liu, Meng Ni, Jincan Chen, Performance Evaluation and Parametric Optimum Design of a Syngas Molten Carbonate Fuel Cell and Gas Turbine Hybrid System. Renewable Energy 2015. 80: p. 407-414. 4. ...
62
Preparation and Conductivity of La9.33 Si6O26 (LSO) – Ce0.85Gd0.15O1.925 (CGO15) Composite Based Electrolyte for IT-SOFC
... . SOFC also uses high operational temperature (800-1000°C) due to the type of its ...the materials which lead to lower ...of SOFC technology by lowering the operational temperature to the ...
6
Effect of Dopant on Improving Structural, Density and Functional Properties of Ceria Based SOFC Electrolyte
... Keywords: GDC, Conventional sintering, Electrolyte, SOFCs. 1. INRODUCTION Solid oxide fuels cell was considered as one of the best electrochemical device for the direct conversion of chemical energy into electrical ...
8