• No results found

fault tolerant control systems design

Impulse Elimination and Fault-Tolerant Preview Controller Design for a Class of Descriptor Systems

Impulse Elimination and Fault-Tolerant Preview Controller Design for a Class of Descriptor Systems

... the design method of optimal preview controller was given based on reference ...preview control of de- scriptor systems was extended to multiagent generalized sys- tems, and a new simulation idea was ...

14

Design and Analysis of Wind Turbine Systems with Open-Circuit Fault-Tolerant Control for Outer Switches of Five-Level Rectifiers

Design and Analysis of Wind Turbine Systems with Open-Circuit Fault-Tolerant Control for Outer Switches of Five-Level Rectifiers

... a tolerant control for the open-circuit fault of the outer switches in three-level rectifiers (both 5L-NPC and T-type topologies) used in wind turbine ...turbine systems because of their ...

8

Multi-agent Platform and Toolbox for Fault Tolerant Networked Control Systems

Multi-agent Platform and Toolbox for Fault Tolerant Networked Control Systems

... traditional control systems and enhances resource ...appropriate control equipment through a fault diagnosis (FDI) system to detect (FD - Fault Detection), isolate (FI) and identify the ...

8

Active fault-tolerant control for switched systems with time delay

Active fault-tolerant control for switched systems with time delay

... active fault-tolerant control for switched systems with time ...the fault diagnosis observer, an adaptive fault estimate algorithm is proposed, which can estimate the ...

20

Fault Diagnosis and Fault-Tolerant Control of Unmanned Aerial Vehicles

Fault Diagnosis and Fault-Tolerant Control of Unmanned Aerial Vehicles

... the fault-tolerant capability of unmanned systems has begun to draw more and more at- tention in both industrial and academic communities, due to the increased demands for safety and reliability [14, ...

205

Reconfigurable Control of Two-Time Scale Systems in Presence of Additive Faults

Reconfigurable Control of Two-Time Scale Systems in Presence of Additive Faults

... the fault-hiding approach for linear and Hammerstein systems and used virtual actuators and sensors respectively, for actuator and sensor ...affine systems in [8]. Another widely studied method ...

10

Fault Detection/Isolation and Fault Tolerant Control for Hypersonic Vehicle.

Fault Detection/Isolation and Fault Tolerant Control for Hypersonic Vehicle.

... gain-scheduling control scheme to encompasses the entire flight ...LPV systems are motivated by the gain-scheduling control design methodology ...LPV control has emerged as an effective ...

174

Observer-based fault-tolerant control for a class of networked control systems with transfer delays

Observer-based fault-tolerant control for a class of networked control systems with transfer delays

... to design and analysis ...conventional systems, which can lead to the performance degradation and even ...instability. Fault detection and diagnosis (FDD) and fault tolerant ...

15

Active Vibration Attenuation for Uncertain Buildings Structural Systems with Sensor Faults

Active Vibration Attenuation for Uncertain Buildings Structural Systems with Sensor Faults

... the fault tolerant control or reliable control during the past decades because unexpected faults or failures may result in substantial damage, and can even be hazardous to human and ...

7

A Fault Tolerant Control System Design Using Real Time Operating System

A Fault Tolerant Control System Design Using Real Time Operating System

... a fault tolerant Control System design which plays a vital role in the system design of any ...applications, fault tolerant control systems are used. If ...

6

Fault Tolerant Model Predictive Control of Hybrid Systems

Fault Tolerant Model Predictive Control of Hybrid Systems

... in Fault tolerant control of hybrid systems, for a survey one can look at [1] [2], ...hybrid systems discrete/temporal abstraction of the continuous dynamics is presented in ...optimal ...

8

Fault tolerant flight control system design for unmanned aerial vehicles

Fault tolerant flight control system design for unmanned aerial vehicles

... PID control development, for re-focusing the research and for your assistance with the UAV case ...in control systems engineering and I have always believed and still do that if I can be one tenth as ...

370

Control Reconfiguration of a Boiler-Turbine Unit After Actuator Faults

Control Reconfiguration of a Boiler-Turbine Unit After Actuator Faults

... the design and comparison of active and passive fault- tolerant linear parameter-varying (LPV) controllers for wind turbines, and 6) Robust fuzzy fault-tolerant control of wind ...

10

The Datacenter as a Computer. An Introduction to the Design of Warehouse-Scale Machines

The Datacenter as a Computer. An Introduction to the Design of Warehouse-Scale Machines

... Increasingly, computing and storage are moving from PC-like clients to large Internet ser- vices. While early Internet services were mostly informational, today many Web applications offer services that previously ...

120

Cross layer resource allocation for fault tolerant topology control in wireless mesh networks based on genetic algorithm

Cross layer resource allocation for fault tolerant topology control in wireless mesh networks based on genetic algorithm

... power control in wireless mesh network is ...topology control problem that has been studied in this paper; therefore, FTTC-TMBF is NP-complete and the computational complexity of FTTC-TMBF increases ...

24

Modeling and fault tolerant control of an electro hydraulic actuator

Modeling and fault tolerant control of an electro hydraulic actuator

... a control methodology that ensures the safe operation under acceptable limit of a system when faults occur under FDI ...variant fault behavior (fault ...for fault detection mechanisms. Chi and ...

15

Fault Tolerant Systems viewed as Switching Hybrid Systems

Fault Tolerant Systems viewed as Switching Hybrid Systems

... A Fault Tolerant Control system is a system that can change in a discrete way through change in states caused by faults occurrence. Plant architecture can be changed by switch-over functions. ...

6

CSP methods for identifying atomic actions in the design of fault tolerant concurrent systems

CSP methods for identifying atomic actions in the design of fault tolerant concurrent systems

... Again since the trace evaluation determines all possible traces, the set S will contain those events in the other process P, equivalently P, which can immediately precede the first commu[r] ...

12

A FAULT-TOLERANT EMERGENCY-AWARE ACCESS CONTROL SCHEME FOR CYBER-PHYSICAL SYSTEMS

A FAULT-TOLERANT EMERGENCY-AWARE ACCESS CONTROL SCHEME FOR CYBER-PHYSICAL SYSTEMS

... cannot control the emergencies within the system ...access control privileges to enable emergency management for ...only control the systems with single ...Access control (CAAC) [23, ...

12

Diagnosis and Fault-Tolerant Control

Diagnosis and Fault-Tolerant Control

... 1.2 Faults and fault tolerance 3 1.2.1 Faults 3 1.2.2 Requirements and properties of systems subject to faults 8 1.3 Elements of fault-tolerant control 10 1.3.1 Fault-tolerant control ar[r] ...

8

Show all 10000 documents...

Related subjects