Layers Based on Multiple Split Ring Resonators (MSRRs)
Tunable microwave filters based on dielectric split ring resonators
... The EM field distributions of the Dielectric-SRRs, on the other hand, are useful to tune the coupling coefficients between two adjacent Dielectric-SRRs by rotating these resonators. Therefore, these new ...
152
Design and evaluation of split-ring resonators for aptamer-based biosensors
... Abstract. Split-ring resonators are electrical circuits, which enable highly sensitive readout of split capacity changes via a measurement of the shift in the resonance ...the split ...
11
Compact Multi-Band Filter Based on Multi-Ring Complementary Split Ring Resonators
... and 9%, respectively. In the proposed filters, the resonance frequencies of the multi-ring CSRR cells were adjusted at 2.4 GHz, 3.4 GHz, and 5.8 GHz respectively, which can be designed by tuning the geometrical ...
9
Permittivity Measurement of Low Loss Substrates Based on Split Ring Resonators
... Keywords Split-Ring Resonators (SRR), Permittivity, Non-Contact Measurement 1. Introduction Complex permittivity of the material is an important parameter to reflect the in- teractions of matter and ...
7
Microwave Sensors Based on Coplanar Waveguide Loaded with Split Ring Resonators:
... 4 Split Ring Resonators SRRs are the artificial structures used to construct Left Handed Materials (LHM), the index of refraction is less than zero, which is not readily available in nature, namely ...
11
A Terahertz Quarter Wave Plate Based on Staggered Split Ring Resonators
... its multiple applications, such as communication system and sensing ...controller based on metamaterial is urgently needed, especially for the THz ...
7
A Novel Miniaturized Bandpass Filter Based on Complementary Split Ring Resonators (CSRRs ) and Open-Loop Resonators
... presented based on Complementary Split Ring Resonators (CSRRs) and a pair of open- loop resonators that has a single pair of transmission zeros at finite frequencies that causes an ...
8
Complementary Split Ring Resonators of Large Stop Bandwidth
... Artificial transmission lines based on CSRR are useful for the implementation in microwave devices due to their peculiar nature and small size. Artificial transmission lines offer improved performance, novel ...
6
On-metal UHF-RFID passive tags based on complementary split-ring resonators
... complementary split-ring resonators (CSRRs) placed at very small distances from a metallic plane have been studied in this ...work. Based on duality, qualitative predictions of the particle ...
13
Duplexers and Multiplexers Based on Microstrip Line Loaded with Complementary Split Ring Resonators
... 12. Hu, X. and S. He, “Novel diplexer using composite right/left- handed transmission lines,” Microwave and Optical Technology Letters, Vol. 50, No. 11, 2970–2973, 2008. 13. Baena, J. D., J. Bonache, F. Mart´ın, R. ...
8
A Compact UWB HMSIW Bandpass Filter Based on Complementary Split-Ring Resonators
... 2. DESIGN OF CSRR FOR UWB BAND-PASS FILTER 2.1. New CSRR Unit and Equivalent Circuit The geometry dimensions and the equivalent circuit of the proposed CSRR are shown in Figs. 1 and 2 respectively. The resultant ...
7
Optical Bandpass Filter Design Using Split Ring Resonators
... metallic split ring resonators (SRR) at optical frequencies is theoretically investigated in this ...SRR layers will cause increase in the number of magnitude peaks and narrowing of the ...
11
A Tunable Left-Handed Metamaterial Based on Modified Broadside-Coupled Split-Ring Resonators
... LHMs based on nematic liquid crystals were investigated by placing a periodic array of split ring resonators in nematic liquid crystal background ...circuits.Capacitor-loaded split ...
11
A Dual-Band High Gain Antenna Based on Split Ring Resonators and Corrugated Plate
... the equivalent inductance “L” from the metal rings will be affected significantly with variable b or variable r changing. The width between the two rings and the width of split are the main factors which affect ...
6
A Varactor-Tuned Bandpass Filter Using Open Split-Ring Resonators
... Open Split-Ring Resonators Cheng Liu, Xinhuai Wang * , Yangbing Xu, and Xiaowei Shi Abstract—This paper presents a compact tunable bandpass filter that is based on open split ring ...
6
A Further Investigation on the Performance of the Broadside Coupled Rectangular Split Ring Resonators
... study based on the Finite Element Method (FEM) formulation of Ansoft’s High Frequency Structure Simulator (HFSS) is reported to investigate the performance of a conformal Broadside Coupled Rectangular Split ...
8
Fabrication of Multiple 3D Ring Resonators by FDTD Method
... layers at prescribed angles. 3D direct write lithography (3DDW) has the capability to draw nearly arbitrary structures, but is an inherently slow serial writing process. Here we present a method, denoted focused ...
5
Comparative Analysis of Split-Ring Resonators for Tunable Negative Permeability Metamaterials Based on Anisotropic Dielectric Substrates
... 2. SIMULATION MODELS OF SRRS This section will describe the models for the composite negative magnetic permeability media. Four types of SRRs from which the various resonators are constructed are shown in Fig. 1. ...
14
Response of complementary split ring resonators in composite stratified substrate integrated waveguide
... to multiple planar trans- mission lines, from RF to the IR frequency range applied to optical communications and sensing/detection ...plane layers of the SIW structure, leading to unavoidable radiation loss ...
6
Substrate integrated waveguide filters with broadside-coupled complementary split ring resonators
... coupled resonators can be established to obtain the physical configuration of the required ...are based on resonators coupled by an evanescent-mode waveguide ...
14