• No results found

monocrystalline Si

Preparation of Metal Nanoparticles by Jet Electrodeposition Using Monocrystalline Silicon Substrate

Preparation of Metal Nanoparticles by Jet Electrodeposition Using Monocrystalline Silicon Substrate

... high. In this case, the deposition time per unit area was short, such that the electric power during crystallization process was insufficient and initiated surface nuclei did not have time to grow larger. The above ...

11

Effect of crystal plane orientation on the friction induced nanofabrication on monocrystalline silicon

Effect of crystal plane orientation on the friction induced nanofabrication on monocrystalline silicon

... erty, monocrystalline silicon has been widely used as the structural material in micro/nanoelectromechanical sys- tems (MEMS/NEMS) ...on Si(100) surface by scanning a dia- mond tip on a target sample ...

8

Taking monocrystalline silicon to the ultimate lifetime limit

Taking monocrystalline silicon to the ultimate lifetime limit

... A central quantity to assess the high quality of monocrystalline silicon (on scales beyond mere purity) is the minority charge carrier lifetime. We demonstrate that the lifetime in high purity float zone material ...

9

60Co y-irradiation Effects on Electrical Characteristics of Monocrystalline Silicon Solar Cell

60Co y-irradiation Effects on Electrical Characteristics of Monocrystalline Silicon Solar Cell

... I   (7) The dark I–V characteristics of the monocrystalline Si solar cell were further analyzed to study the degradation mechanism of γ-ray irradiation. For example, Figure 3 shows the γ-ray irradiation ...

11

Influence of Abrasive Shape on the Abrasion and Phase Transformation of Monocrystalline Silicon

Influence of Abrasive Shape on the Abrasion and Phase Transformation of Monocrystalline Silicon

... Keywords: three-body abrasion; phase transformation; monocrystalline silicon; abrasive shape;.. 26 molecular dynamics 27 28 1.[r] ...

16

MONOCRYSTALLINE SILICON CARBIDE WAFERS PROCESSING S. V. Ivenin

MONOCRYSTALLINE SILICON CARBIDE WAFERS PROCESSING S. V. Ivenin

... The present paper considers the methods of processing monocrystalline SiC wafers from cut- ting to polishing. The review of scientific papers by Russian and foreign authors shows that the most important and ...

14

Nanofabrication on monocrystalline silicon through friction induced selective etching of Si3N4 mask

Nanofabrication on monocrystalline silicon through friction induced selective etching of Si3N4 mask

... the post-etching process, the scanned area was selec- tively etched. Hence, the fabricated patterns were al- most composed of damage-free monocrystalline silicon structures. However, the structure fabricated by ...

7

Structural and optical properties of ITO/TiO2 anti reflective films for solar cell applications

Structural and optical properties of ITO/TiO2 anti reflective films for solar cell applications

... boron-doped monocrystalline Si wafer with one side polished. Silicon substrates were cleaned by a standard Radio Corporation of America method to remove sur- face contamination. After rinsing with deionized ...

6

Results in Sizing and Simulation of PV Applications Based on Different Solar Cell Technologies

Results in Sizing and Simulation of PV Applications Based on Different Solar Cell Technologies

... The PV system is intended to provide two days autonomy, in order to com- pensate for days with high cloudiness. This feature will result in a slightly over- sized PV generator and battery. The types of PV technologies ...

12

Enhanced Physical Properties Of Indium Tin Oxide Films Grown on Zinc Oxide-Coated Substrates

Enhanced Physical Properties Of Indium Tin Oxide Films Grown on Zinc Oxide-Coated Substrates

... on monocrystalline silicon (c-Si) wafers, multi-crystalline silicon (mc-Si) wafers, and glass substrates is systematically investigated regarding the ZnO buffer layer ...

9

Performance analysis of crystalline (poly Si) and thin film (a Si/c Si) 
		photovoltaic systems

Performance analysis of crystalline (poly Si) and thin film (a Si/c Si) photovoltaic systems

... The results of research carried out during the period of February to August 2015 shown that the values of PR and Ym of thin film (a-Si/µc-Si) PV cell were better than crystalline (Poly-Si) based on ...

5

Morphology Analysis of Si Island Arrays on Si(001)

Morphology Analysis of Si Island Arrays on Si(001)

... these Si pyramids arrays are not yet well ...these Si island arrays, we have carried out a detailed study of their mor- phology features, in particular island size and facet distri- ...described Si ...

6

Structural, Optical and Photoelectrochemical Properties of Cuprous Oxide Synthesized by Low Temperature Thermal Oxidation 

Structural, Optical and Photoelectrochemical Properties of Cuprous Oxide Synthesized by Low Temperature Thermal Oxidation 

... The results of this study showed that low temperature deposition of a near single phase Cu 2 O is possible and that, post deposition cooling did not result in appreciable top CuO layer as confirmed by the X-ray ...

6

Spectral Filtering of Photovoltaic Cells Using Novel Bio Filter: Silver Coated Ixora Extract Using Methanol Solution

Spectral Filtering of Photovoltaic Cells Using Novel Bio Filter: Silver Coated Ixora Extract Using Methanol Solution

... The data logger was used to measure desired parameters such as radiation, current, voltage and power for two types of PV panels i.e. monocrystalline and polycrystalline. A data logger records and saves all ...

8

Crystal Orientation Effect on the Subsurface Deformation of Monocrystalline Germanium in Nanometric Cutting

Crystal Orientation Effect on the Subsurface Deformation of Monocrystalline Germanium in Nanometric Cutting

... to Si-II (β-tin-Si) or amorphous structure in the loading process of nanometric cutting and nanoindentation ...to Si-XII/Si-III or amorphous silicon according to the process ...

10

New Model for n-p Monocrystalline Solar Cell with Exponential Doping

New Model for n-p Monocrystalline Solar Cell with Exponential Doping

... For this raison, we have applied one dimensional model to calculate the efficiency of conversion of n ‏ + -p monocrystalline solar cell by imposing a concentration gradient on base region in order to create this ...

8

1.
													Comparative study on solar photovoltaic panel for different slope angles

1. Comparative study on solar photovoltaic panel for different slope angles

... For our experimental analysis as shown in fig.4 we took into consideration two solar panels, i.e., Monocrystalline and Polycrystalline Solar Cells. The testing of these panels was carried out on the first day of ...

6

Sub-barrier fusion of Si+Si systems

Sub-barrier fusion of Si+Si systems

... The near- and sub-barrier fusion excitation function has been measured for the system 30 Si + 30 Si at the Laboratori Nazionali di Legnaro of INFN, using the 30 Si beam of the XTU Tandem[r] ...

5

Photoconductivities in monocrystalline layered V2O5 nanowires grown by physical vapor deposition

Photoconductivities in monocrystalline layered V2O5 nanowires grown by physical vapor deposition

... diffraction (SAD). Electrical contacts of the two-terminal single-NW devices were fabricated by focused ion beam (FIB; FEI Quanta 3D FEG, FEI Company, Hillsboro, OR, USA) deposition using platinum (Pt) as the metal elec- ...

8

Superconductivity in monocrystalline YNiSi3 and LuNiSi3

Superconductivity in monocrystalline YNiSi3 and LuNiSi3

... orthorhombic centrosymmetric space-group Cmmm where the R = (Y, Lu) and the Ni atoms are located at the Wyckoff po- sitions 4 j (m2m) and 4i (m2m), respectively. There are three inequivalent Si atoms, two of them ...

15

Show all 5750 documents...

Related subjects