• No results found

positioning errors

Handling positioning errors when optimizing sawing of Scots pine and Norway spruce logs using CT scanning

Handling positioning errors when optimizing sawing of Scots pine and Norway spruce logs using CT scanning

... that positioning errors have an adverse effect on opti- mization, since the optimization methods used are rather sensitive to positioning ...of positioning errors, a method is proposed ...

7

On the Compensation of Probe Positioning Errors When Using a Nonredundant Cylindrical Nf-Ff Transformation

On the Compensation of Probe Positioning Errors When Using a Nonredundant Cylindrical Nf-Ff Transformation

... probe positioning errors in a near-field–far-field transformation with cylindrical scanning using a nonredundant number of measurements are presented and experimentally validated in this ...

15

Far Field Pattern Reconstruction from Positioning Errors Affected Near Field Data Acquired via Helicoidal Scanning

Far Field Pattern Reconstruction from Positioning Errors Affected Near Field Data Acquired via Helicoidal Scanning

... the positioning errors, the iterative technique has been suc- cessfully applied in [23,24] for reconstructing the uni- formly distributed helicoidal samples from the acquired irregularly spaced ones in the ...

9

The influence of antenna positioning errors on the radio-frequency localization of partial discharge sources

The influence of antenna positioning errors on the radio-frequency localization of partial discharge sources

... systematic errors on the positioning of the antennas. These errors are analyzed for three different antenna array configurations and for different vector directions from the ...antenna ...

7

An Iterative Technique to Compensate for Positioning Errors in the Nf-Ff Transformation with Helicoidal Scanning for Long Antennas

An Iterative Technique to Compensate for Positioning Errors in the Nf-Ff Transformation with Helicoidal Scanning for Long Antennas

... the positioning errors in the corresponding NF-FF transformation will be here validated both by numerical simulations and laboratory tests performed at the UNISA Antenna Characterization ...

14

Test–retest reliability of mandibular morphology measurements on cone-beam computed tomography-synthesized cephalograms with random head positioning errors

Test–retest reliability of mandibular morphology measurements on cone-beam computed tomography-synthesized cephalograms with random head positioning errors

... of errors in identifying bony landmarks on the reliability of determining morphological param- eter with random head positioning errors could be studied by simulating random head positions without ...

14

Performance of an ultrasonic telemetry positioning system under varied environmental conditions

Performance of an ultrasonic telemetry positioning system under varied environmental conditions

... between positioning performance and water ...increased positioning error as water tem- peratures ...larger errors in these estimates lead to larger positioning ...processing positioning ...

17

Evaluating the need for adaptive therapy when delivering conformal bladder radiotherapy

Evaluating the need for adaptive therapy when delivering conformal bladder radiotherapy

... Abstract Background and Purpose To audit positioning errors during bladder Image Guided Radiotherapy IGRT and quantify survival outcomes Materials and Methods Retrospective review of 141[r] ...

19

INDUSTRIAL ROBOT REPEATABILITY TESTING WITH HIGH SPEED CAMERA PHANTOM V2511

INDUSTRIAL ROBOT REPEATABILITY TESTING WITH HIGH SPEED CAMERA PHANTOM V2511

... of positioning errors in circular path tests (usually 1 mm) frequently proves insufficient in large industrial robots testing applications [16, ...repeatability errors employ ...the ...

8

Estimation and Calibration of Robot Link Parameters with Intelligent Techniques

Estimation and Calibration of Robot Link Parameters with Intelligent Techniques

... endeffector positioning errors in a single kinematic identification model of a robot ...the positioning errors are related to the geometric parameters of linkages ...manipulator ...

10

Effects of Random Errors Upon Effective Permittivity of a Composite Containing Short Needles

Effects of Random Errors Upon Effective Permittivity of a Composite Containing Short Needles

... of positioning and orientational errors upon the ensemble averaged effective permittivity of a composite medium containing electrically short needles are ...increasing positioning errors ...

15

IDENTIFICATION AND CORRECTION OF COORDINATE MEASURING MACHINE GEOMETRICAL ERRORS USING LASERTRACER SYSTEMS

IDENTIFICATION AND CORRECTION OF COORDINATE MEASURING MACHINE GEOMETRICAL ERRORS USING LASERTRACER SYSTEMS

... geometric errors WMP can be determined: positioning errors of par- ticular machine axes, perpendicularity of axes errors, straightness errors and rotation ...various errors for ...

6

Vol 61, No 4 (2018)

Vol 61, No 4 (2018)

... The positioning error of the LEDs on the band have the biggest contribution to the errors of x and y in the proposed ...the positioning error for the LEDs are only about 3 times as much as reading ...

6

Evaluation of three presets for four-dimensional cone beam CT in lung radiotherapy verification by visual grading analysis.

Evaluation of three presets for four-dimensional cone beam CT in lung radiotherapy verification by visual grading analysis.

... The patient-dependent variables that were thought to affect clarity and acceptability were generally not significant and not included in the final analyses. Further study of more patients would be required to investigate ...

9

Adaptive Genetic Algorithm Based Three Dimensional Positioning (AgaTdp) for Radio Frequency Identification Networks R. Maruthaveni 1, Dr. V. Kathiresn2

Adaptive Genetic Algorithm Based Three Dimensional Positioning (AgaTdp) for Radio Frequency Identification Networks R. Maruthaveni 1, Dr. V. Kathiresn2

... VLC positioning system, positioning precision is constrained due to the system noise and non-perfect ...the positioning errors that facilitate 3D of the receiver. Positioning directions ...

13

An improved algorithm of DV hop in wireless sensor networks

An improved algorithm of DV hop in wireless sensor networks

... average positioning precisions of the combination algorithm arerelatively ...node positioning errors because the cuckoo searching algorithm can correct the positioning errors of the ...

5

Indoor Positioning Algorithms with Offline Positioning Capabilities for Local Positioning Systems

Indoor Positioning Algorithms with Offline Positioning Capabilities for Local Positioning Systems

... introduce errors in estimating location ...require positioning robots or drones where a high accuracy and precision is required, the accuracy will be acceptable for the applications mentioned ...

71

Study on packaging design positioning and methods based on design accuracy

Study on packaging design positioning and methods based on design accuracy

... “Design positioning” is a term from abroad, of which “position” means location and ...design positioning refers to design with a clear goal and accurate design that solves the problem of ...as ...

5

THE STUDY OF STUDY PROGRAM COMPETITIVE POSITIONING IN HIGHER EDUCATION: A CASE STUDY IN A HIGHER EDUCATION INSTITUTION IN INDONESIA

THE STUDY OF STUDY PROGRAM COMPETITIVE POSITIONING IN HIGHER EDUCATION: A CASE STUDY IN A HIGHER EDUCATION INSTITUTION IN INDONESIA

... competitive positioning to monitor and evaluate the quality of the Study Programs according to Higher Education National Standard (SNPT) by conducting a case study in one Higher Education Institution in Indonesian ...

16

CAD/CAM implant surgical guides: maximum errors in implant positioning attributable to the properties of the metal sleeve/osteotomy drill combination

CAD/CAM implant surgical guides: maximum errors in implant positioning attributable to the properties of the metal sleeve/osteotomy drill combination

... The results of this study compute part of the expected maximum differences in the final clinical implant pos- ition when a CAD/CAM surgical guide is used. Given this data, the implant surgeon, with an in-office 3d ...

9

Show all 5964 documents...

Related subjects