• No results found

Skew angle

Wave steering effects in anisotropic composite structures: direct calculation of the energy skew angle through a finite element scheme

Wave steering effects in anisotropic composite structures: direct calculation of the energy skew angle through a finite element scheme

... the angle of the propagating energy wavefront as well as the skew angle between the phase and group velocities for each wave type as a function of the wavenumber angular ...

13

Effect of Skew Angle on the Behavior of Bowstring Girder Bridge

Effect of Skew Angle on the Behavior of Bowstring Girder Bridge

... of skew angle on the behaviour of Bowstring girder-bridge is briefly described in this ...The skew angles considered for study is 0 degree, 30 degree, 45 degree and 60 ...of skew angle ...

7

Influence of Skew Angle on RC-T Girder Bridge

Influence of Skew Angle on RC-T Girder Bridge

... bridge skew angle, deck width, deck flexibility, number of span, number of column per bent, column ductility, soil-abutment-superstructure ...the skew angle ...

6

Study of R.C.C. T-Beam Bridge with Skew Angle

Study of R.C.C. T-Beam Bridge with Skew Angle

... To facilitate a detailed comparative parametric study of the skewed highway T-beam bridges, a number of detailed three dimensional (3D) finite element (FE) models were developed using CSi Bridge (2015). In all of the ...

6

The effect of skew angle on the mechanical behaviour of masonry arches

The effect of skew angle on the mechanical behaviour of masonry arches

... At this study, arches were constructed with joints parallel to abutments (Fig. 2a). Since the intention of the authors was to investigate the effect of the arch ring geometry, the effect of fill has not been included at ...

13

Effect of Skew Angle on the Behaviour of Skew Slab under Uniformly Distributed Load

Effect of Skew Angle on the Behaviour of Skew Slab under Uniformly Distributed Load

... of skew angle on the behavior of skew slab, skew angles 0º (rectangular slab), 15º, 30º, 45º and 60º were considered with reinforcement pattern of main reinforcement parallel to free edge and ...

10

EFFECT OF SKEW ANGLE ON STRUCTURAL BEHAVIOR OF RC RIBBED SKEW SLAB

EFFECT OF SKEW ANGLE ON STRUCTURAL BEHAVIOR OF RC RIBBED SKEW SLAB

... of skew slab is quite complicated than those of a conventional rectangular ...the skew angle, the deflection and stresses in the skew slab are significantly different from those of a straight ...

9

Index Terms - Integral bridge, skew angle, stress reduction, static

Index Terms - Integral bridge, skew angle, stress reduction, static

... and skew angle, then check bending and shear stress, axial force and deflection under allowable stress ...skew angle. After the analysis finished, we can extend span length and skew ...

8

Nose-Angle Bridge Piers as Alternative Countermeasures for Local Scour Reduction

Nose-Angle Bridge Piers as Alternative Countermeasures for Local Scour Reduction

... but continuously to have a lesser difference as the skew angle is increased. This indicates that the nose-angle pier does insignificantly reduced the local scour for greater skew angles. ...

11

Analysis of clamped skewed plates subjected to lateral uniform loading.

Analysis of clamped skewed plates subjected to lateral uniform loading.

... The Rayleigh-Ritz technique was employed to establish a deflection function for clomped uniformly loaded skewed plates. From this function, deflections, rectangular moments and principal moments were computed at ...

69

Influence of construction method on the load bearing capacity of skew masonry arches

Influence of construction method on the load bearing capacity of skew masonry arches

... along the arch. The stones were arranged in a pattern where every second courses had a half-voussoir translation in the longitudinal direction. The arch barrels contained a single ring of stone voussoirs. In the ...

36

Variation of Design Live Load Moment with Skew on RC Bridges

Variation of Design Live Load Moment with Skew on RC Bridges

... with skew angle less than 15 o transverse girders are provided parallel to the support lines so the gridlines should also be parallel to the support ...for skew angles exceeding 15 degrees, ...

11

Dynamic analysis of 
		rotating composite cantilever blades with piezoelectric layers

Dynamic analysis of rotating composite cantilever blades with piezoelectric layers

... the skew composite plates with piezoelectric ...of skew angle and rotational velocity on the free vibration frequencies of a cantilever composite plate with piezoelectric ...

6

An Integrated Skew Detection And Correction Using Fast Fourier Transform And DCT

An Integrated Skew Detection And Correction Using Fast Fourier Transform And DCT

... In 2012 Kumar et al. has introduced a new method which reduces the time complexity without compromising with the accuracy of Hough transform. The main advantage of Hough transform [1] is due to its better accuracy and ...

6

Buckling Studies on Laminated Composite Skew Plates

Buckling Studies on Laminated Composite Skew Plates

... composite skew plates, the parameters considered being skew angle, aspect ratio, lamination sequence, fibre orientation angle, number of layers and boundary ...a skew plate increases as ...

13

Design of Novel Reconfigurable Frequency Selective Surfaces with Two Control Techniques

Design of Novel Reconfigurable Frequency Selective Surfaces with Two Control Techniques

... is excited using cosine modulated Gaussian pulse centered at 10 GHz with a bandwidth of 20 GHz. As shown in Figure 6 the top and bottom boundaries of the computational domain are terminated by the convolutional perfect ...

11

Fatigue and Fretting Studies of Gas Compressor Blade Roots

Fatigue and Fretting Studies of Gas Compressor Blade Roots

... ABSTRACT: Fretting Fatigue is the complex phenomenon which occurs at the contact regions. A typical dovetail blade and disc joints is the one in which the fretting fatigue failure takes place at their contact ...

5

A Comparative Experimental Study on Head-Disk Touch-Down Detectability Based on Off-Track Vibration

A Comparative Experimental Study on Head-Disk Touch-Down Detectability Based on Off-Track Vibration

... the skew angle, touch down area (TDA), and the head-stack assembly (HSA) rotation inertia effects on TD detectability were ...Bigger skew angle and bigger TDA are helpful for good TD ...

8

Vibration of Visco Elastic Parallelogram Plate with Parabolic Thickness Variation

Vibration of Visco Elastic Parallelogram Plate with Parabolic Thickness Variation

... Time period and deflection are computed for visco-elas- tic parallelogram plate, whose thickness varies paraboli- cally, for different value of skew angle (θ), taper constant (β), and aspect ratio (a/b) at ...

9

Effect of Reinforcement Pattern on the Behaviour of Skew Slab

Effect of Reinforcement Pattern on the Behaviour of Skew Slab

... in skew angle is because the maximum force flow between the support lines is through the strip area connecting the obtuse angled corners, as skew angle increases the length of strip area ...

7

Show all 6959 documents...

Related subjects