• No results found

tensile stress-strain behavior

Design issues for concrete reinforced with steel fibers, including fibers recovered from used tires

Design issues for concrete reinforced with steel fibers, including fibers recovered from used tires

... the tensile stress-strain behavior of SFRC that affect the accuracy of the ...the tensile stress-strain behavior of SFRC and models are derived for different types ...

41

Functional morphology of the Alligator mississippiensis larynx with implications for vocal production

Functional morphology of the Alligator mississippiensis larynx with implications for vocal production

... In tensile tests, alligator vocal folds demonstrated a linear stressstrain behavior in the low strain region and nonlinear stress responses at strains larger than 15%, which ...

8

Evaluation of material stress-strain behavior of pressure tubes of heavy water reactors using FE analysis of ring-tensile tests

Evaluation of material stress-strain behavior of pressure tubes of heavy water reactors using FE analysis of ring-tensile tests

... In this work, specimens in the form of circular rings have been machined from both Zircaloy-2 as well as Zr-2.5%Nb pressure tubes. Both of these materials have been used in the manufacture of pressure tubes of Indian ...

10

Uniaxial Tensile Stress-Strain Relationships of RC Elements Strengthened with FRP Sheets

Uniaxial Tensile Stress-Strain Relationships of RC Elements Strengthened with FRP Sheets

... the behavior of such members under shear stress field is still under investigation due to the high level of complexity associated with the shear behavior (Zararis ...shear behavior of FRP RC ...

35

Effects of surface cracks and strain rate on the tensile behavior of Balmoral Red granite

Effects of surface cracks and strain rate on the tensile behavior of Balmoral Red granite

... mechanical behavior of Balmoral Red granite under dynamic and quasi-static ...the tensile strength of the rock decreases and the rate sensitivity of the rock increases as more cracks are introduced to the ...

5

Co-sintering of a metal injection overmolded bi-metallic part

Co-sintering of a metal injection overmolded bi-metallic part

... yield stress is much higher respect to the original two feedstocks, the stress increases immediately during the initial part of the plastic deformation reaching a very high tensile ...the ...

113

Experimental Compression Behavior of Stiffened Steel-Plate Concrete(SSC) Structures under Compressive Loading

Experimental Compression Behavior of Stiffened Steel-Plate Concrete(SSC) Structures under Compressive Loading

... The importance of the research on the steel-plated concrete (SC) structure is now ever increasing in nuclear structures. The experiments on concrete filled tube (CFT) columns which are similar to SC structures have ...

8

Mechanical Behavior of V-shaped Specimens Optimized for Slow Strain Rate Tensile Tests

Mechanical Behavior of V-shaped Specimens Optimized for Slow Strain Rate Tensile Tests

... intergranular stress corrosion cracking (IGSCC) since the very beginning of the 60’s as mentioned in ...slow strain rate (SSR) and reverse U-bend (RUB) techniques, do not allow to understand the behaviour ...

7

Strain-softening behavior of wood under tension perpendicular to the grain

Strain-softening behavior of wood under tension perpendicular to the grain

... radial tensile strain obtained using the DIC analysis is shown in ...the strain was not uniformly distrib- uted in the earlywood of the specimen and that a consider- ably large tensile ...

7

Superelastic Behavior under Cyclic Loading for Coil Spring of Ti Ni Shape Memory Alloy

Superelastic Behavior under Cyclic Loading for Coil Spring of Ti Ni Shape Memory Alloy

... superelastic behavior of coil springs of a Ti-Ni shape memory alloy was investigated using loading-unloading cycling tests under isothemal ...cyclic behavior in the superelastic deformation were ...

6

Effect of Deformation during Stamping on Structure and Property Evolution in 3rd Generation AHSS

Effect of Deformation during Stamping on Structure and Property Evolution in 3rd Generation AHSS

... ultimate tensile strength are shown to increase with increasing deformation level during forming especially in the areas of extensive bending and stretching with correla- tion to microstructural changes from the ...

19

Experimental and numerical study on fragmentation of steel projectiles

Experimental and numerical study on fragmentation of steel projectiles

... Chen et al. [5] performed a study on soft steel pro- jectiles impacting a harder, but not rigid, target plate with velocities ranging from 200 − 800 m / s. They ex- perimentally identified the sunflower-like petalling ...

6

Evaluation of Mechanical Properties and Medical Applications of Polycaprolactone Small Diameter Artificial Blood Vessels

Evaluation of Mechanical Properties and Medical Applications of Polycaprolactone Small Diameter Artificial Blood Vessels

... PCL scaffolds have acceptable mechanical properties in the range of natural vessels. The most important prop- erties are tensile stress, tensile strain, compliance, burst pressure, str[r] ...

13

6 Materials

6 Materials

... the tensile stress to the tensile strain, and is a constant for a given material provided the limit of proportionality has not been ...

7

Consideration on Design and Choice of Modern Pipelines for Use in Earthquake Areas

Consideration on Design and Choice of Modern Pipelines for Use in Earthquake Areas

... use tensile resistent couplers at these positions in the ...are tensile resistent in combination with bends and branches, couplers without sliding allowance can be ...use tensile resistent couplers ...

10

On Scale Effects and Mesh Independence in Dynamic Fracture Analysis by Means of the Discrete Element Method

On Scale Effects and Mesh Independence in Dynamic Fracture Analysis by Means of the Discrete Element Method

... uniform stress fields a hither to unknown problem arises in the analysis of non-homogeneous materials: the need to know a priori the degree of fracturing of the ...

8

Effect of Continuous Hydrogen Charging on Tensile and Fatigue Properties of Amorphous Ni Zr Alloy Membranes

Effect of Continuous Hydrogen Charging on Tensile and Fatigue Properties of Amorphous Ni Zr Alloy Membranes

... Fracture stress and fracture strain decrease by continuous hydrogen charging in the tensile ...the tensile test and the fatigue test. (5) The improvement of the tensile and fatigue ...

5

The tensile fracture of mild steel

The tensile fracture of mild steel

... described by the maximum tensile stress, hydrostatic tens ion, ratio between two principal stresses, maximum tensile strain, and ratio between two principal strains, all measured at the [r] ...

142

Determination of Tensile Properties of Polymers at High Strain Rates

Determination of Tensile Properties of Polymers at High Strain Rates

... the strain of the specimen can be measured globally or ...nominal strain can be obtained through measurements of the change in the grip ...for strain calculation it is not possible to detect any ...

8

On The Characterization of Plastic Flow in Zr based Metallic Glass
Through Micro indentation: an Atomic Force Microscopy Analysis

On The Characterization of Plastic Flow in Zr based Metallic Glass Through Micro indentation: an Atomic Force Microscopy Analysis

... deformation behavior during the micro- indentation is compared to the response of metallic glass in a multiaxial stress ...elastoplastic behavior at room ...

5

Show all 10000 documents...

Related subjects