thin foils
Validation of the MCNP6 electron-photon transport algorithm: multiple-scattering of 13- and 20-MeV electrons in thin foils
... distributions corresponding to electron pencil beams of 13- and 20-MeV normally incident on single-element (with exception of a titanium alloy), thin foils with atomic numbers from 4 to 79. Electron fluence ...
6
New pathways for improved quantification of energy-dispersive X-ray spectra of semiconductors with multiple X-ray lines from thin foils investigated in transmission electron microscopy
... very thin samples where X-ray absorption is negligible, quantification is hampered by two effects: the small numbers of X-rays produced in very thin foils mean that statistical errors will be high ...
47
Modelling the effects of the radiation reaction force on the interaction of thin foils with ultra-intense laser fields
... Abstract. The effects of the radiation reaction (RR) force on thin foils undergoing radiation pressure acceleration (RPA) are investigated. Using QED-particle-in-cell simulations, the influence of the RR ...
23
Modelling the effects of the radiation reaction force on the interaction of thin foils with ultra-intense laser fields
... Abstract. The effects of the radiation reaction (RR) force on thin foils undergoing radiation pressure acceleration (RPA) are investigated. Using QED-particle-in-cell simulations, the influence of the RR ...
24
Modelling the effect of the radiation reaction force on the acceleration of ultra-thin foils
... density thin foil of varying ...in thin foils), which accounts for the conversion of laser energy to synchrotron radiation, we can describe this change in target ...
10
Radiation pressure-driven plasma surface dynamics in ultra-intense laser pulse interactions with ultra-thin foils
... The dynamics of the PCDS in ultra-intense laser interactions with thin foils, ranging in thickness from tens to hundreds of nanometres, has been investigated experimentally and numerically. The maximum PCDS ...
11
Ion acceleration and plasma jet formation in ultra-thin foils undergoing expansion and relativistic transparency
... At su ffi ciently high laser intensities, the rapid heating to relativistic velocities and resulting decompression of plasma electrons in an ultra-thin target foil can result in the target becoming ...
6
Charge exchange in thin foils
... backing foils before ...of foils was - 5/0 and in general this was true for measurements on different series of foils (Figure ...alumina foils were produced in aqueous solutions, it is not ...
165
Very Low Energy Scanning Electron Microscopy of Free Standing Ultrathin Films
... standing thin foils of gold and carbon were obtained in the transmitted mode at landing energies from several keV down to 2 eV with a lateral resolution from 15 nm up to 30 nm using a detector positioned ...
6
Assessment of the Makeability of T-welded Joints in 10 mm Thick TMCP Steel Using Laser Beam
... of thin foils performed using a high- resolution scanning transmission electron microscope revealed that, during welding, an increase in the content of the base material in the weld was accompanied by an ...
18
Microstructual Study of the Dissimilar Joints of Alloy 690 and SUS 304L Stainless Steel
... 5 TEM micrographs of grain boundary precipitates in the I-52 cap region from thin foils: a bright image of interdendritic phases and tiny precipitates, b EDXS analysis of interdendritic [r] ...
9
Simple and Rapid Spectrophotometric Determination of Titanium on Etched Aluminum Foils
... tometric determination of Ti (IV) has been established in the present work. The proposed procedure offers the ad- vantages of high recovery (>99%) and low RSD (<1.1%) in such a short time without extraction by ...
8
Recycling of Multilayer Packaging Foils by using Diferent Organic Solvent
... range of 5-10 minutes, the temperature range was 60-90 ºC and mechanical stirring ≈300 rpm; the volume of reagents was depended on the samples weight and size (samples must be covered by reagent). Separation by ethyl ...
5
Determination of oxygen permeability and mechanical properties of the aluminium paper foils
... Ten specimens of the foils were used of each sort. In this test, a load was applied along the longitudi- nal axis of a test specimen. The applied load and the resulting elongation of the member were measured. The ...
8
A case study on tandem configured oscillating foils in shallow water
... Previous research on the oscillating-foil turbine system has demonstrated its great potential for energy extraction. However, not much is known about the interaction of this device with its working environment. To ...
35
Gas sensors based on plasma-electrochemically oxidized titanium foils
... Third, we apply the amperometic principle (i.e. a current measurement at a constant voltage between the Pt-C top electrode and the Ti substrate) to demonstrate CO detection in humid air [r] ...
9
Flexibility foils filter function: structural limitations on suspension feeding
... Given that cylinder diameters, gap widths, array width, and fraction of projected area occluded by filter elements were equivalent among the most rigid filter arrays, observed reductions[r] ...
10
STUDY ON VARIOUS PRODUCTION TECHNIQUES FOR DEVELOPMENT OF METAL MATRIX COMPOSITES
... or foils as the matrix materials. The matrix in the form of sheets or foils and the fiber reinforcements are chemically surface treated to effectively inter-diffuse with each ...(metal foils) as per ...
6
Late consequences of early selection: when memory monitoring backfires
... to foils on the first test enriches them with qualitative characteristics that were searched for in targets, then on the second test those foils should be mistaken for targets more often if there was a ...
51
Novel Pre oxidation Patterning on Thin Aluminium Film Generating Ordered Nanopores through Anodization
... metal/oxide interface at the Al surface is angled away from the horizontal, and the electric field is concentrated due to a change in local surface morphology. This condition is apparently exploited in all reported ...
10