Titanium substrates
Characterization and Corrosion Behavior of Hydroxyapatite- Coated Titanium Substrates Prepared Through Laser Induced Liquid Deposition Technique
... and titanium alloys are often used in orthopedic surgery and dentistry because of their biocompatibility, mechanical properties, and corrosion ...on titanium substrates at room temperature and ...
7
Physico-chemical Characterization of Different Preparation Routes of Binary and Ternary Metal Oxides on Titanium Substrates
... on titanium substrates are explored and characterized with Scanning Electron Microscopy (SEM), Energy Dispersive Elemental Analysis (EDAX), Atomic Force Microscopy (AFM) and X-ray Diffraction Spectroscopy ...
13
A Modified Laser Deposition Technique for Depositing Titania Nanoparticles on Commercially Pure Titanium Substrates (Mechanical Evaluation)
... metal substrates, this can be done by using several techniques such as laser cladding techniques, laser pyrolysis technique, laser assisted atmospheric chemical vapor deposition (CVD) and pulsed laser deposition ...
8
ANN prediction of corrosion behaviour of uncoated and biopolymers coated cp Titanium substrates
... resistant[4]. Titanium and Titanium alloys have emerged as materials of choice for biomedical implant applications [5] , [6] , [7] , [8] , [9] , [10] , ...pure Titanium) and Ti-6Al-4V (ELI) ...
50
Calcium Hydroxyapatite Thin Films on Titanium Substrates Prepared by Ultrasonic Spray Pyrolysis
... and titanium are widely used in medicine due to their excellent mechanical properties and corrosion ...of titanium alloy coatings in such a way that full weight bearing can be used much sooner after ...
8
Bioactive Glass-Ceramic Coating of Titanium Substrates by Alkaline Hydrothermal Process
... In this study, we developed a novel hydrothermal method for coating titanium surfaces with BG. This method involves a sol-gel synthesis of tertiary system of BG followed by hydrothermal treatment at 170ºC under ...
94
Biologically Modified Titanium Substrates for Improved Surface Bioactivity
... alloy substrates to evaluate the osteogenic prop- erties of coated and uncoated substrates, and reported that the coating has a positive influence on biocompatibility and oseoinductive performance of ...
7
Evaluation of Calcium Phosphate Coating Films on Titanium Fabricated Using RF Magnetron Sputtering
... pure titanium (CP-Ti) or þ type titanium alloys such as ...of titanium implants with calcium phosphate is one of the methods used to improve their ...to titanium substrates and ...
6
PubMedCentral-PMC4970218.pdf
... the substrates of different topography with respect to RhoA ...micropatterned substrates and demonstrated that the RhoA pathway is critical in topography-induced focal adhesion (FA) formation, actin ...
13
Effect of Hydroxide Ion Concentration on the Morphology of the Hydroxyapatite Nanorods Synthesized Using Electrophoretic Deposition
... crystal has a much smaller diameter. The smaller size of the HAp crystal may be beneficial to the bioactivity of the coating. All the deposits were rod-like in shape, having a defined hexagonal crystal habit. ...
6
Reduction of Titanium Dioxide to Metallic Titanium by Nitridization and Thermal Decomposition
... metallic titanium that exhib- ited a lustrous ...metallic titanium, as the obtained diffraction pattern was comparable to that of commercial grade ...
6
General review of titanium toxicity
... on titanium tattoo are ...including titanium, as reported by Venclikova et ...of titanium in tissue around an implant which had the presence of oral mu- cosa ...The titanium needle-like ...
12
Atmospheric pressure chemical vapour deposition of vanadium, chromium and titanium oxides
... f titanium tetraisopropoxide in a solution o f ethanol, w ater and diethanolam ine on a quartz ...using Titanium tetraisopropoxide in a solution o f isopropanol, with a glass substrate showed that phase ...
139
Studies on the crystal structure, magnetic and conductivity properties of titanium oxycarbide solid solution (TiO1 xCx)
... the titanium and non-metal sites and diffuse scattering detected by selected-area electron diffraction in the TEM indicates some evidence of local ordering of vacancies or segregation of carbon and oxygen rich ...
15
Fabrication of titanium foam by using compaction method
... percentage Figure 4: The effeot of pure titanium foam content and sintering temPerature on the porosity lor the titanium foams... Density g/cm3 vs Composition of titanium.[r] ...
6
A unique modular implant system enhances load sharing in anterior cervical interbody fusion: a finite element study
... Four implant iterations were modeled; InterPlate titanium device with dynamic surface features (springs), InterPlate titanium non-dynamic device, InterPlate titanium design having a full[r] ...
9
Electrophoretic Study of d-Block Metal Ions on Plain and Tri-n-Butylamine (TBA) Impregnated Titanium (IV) Tungstate Layers
... Gupta, M acid (O.A.), E movement of the centre of the zones was measured in cm. A positive sign 8 ; 0.1M citric acid (C.A), E 9 ; 0.1M tartaric acid (T.A). The indicates the movement of the ions towards cathode and a ...
13
Assessing the life cycle environmental impacts of titania nanoparticle production by continuous flow solvo/hydrothermal synthesis
... precursors, like titanium oxysulphate (TiOS), to complex organic precursors such as titanium bis(ammonium- lactato) dihydroxide (TiBALD). Synthesis at laboratory scale is used to determine yield, size ...
14
The Influence of Fluoride Anion on the Equilibrium between Titanium Ions and Electrodeposition of Titanium in Molten Fluoride Chloride Salt
... of titanium ions were ...know, titanium ions can form a variety of complex compounds in the molten salt with anions, and the complex- ation power of fluoride anion with titanium is more force than ...
5
Preparation of Calcium Phosphate Coatings on Titanium Using the Thermal Substrate Method and Their in vitro Evaluation
... implant applications because of their demonstrated osteocon- ductive properties. 1) Hydroxyapatite is considered to be a bioactive material, and is used in the fabrication of medi- cal and dental implants, usually in the ...
5