[PDF] Top 20 Expected Performance of Tracking in CMS at the HL-LHC
Has 10000 "Expected Performance of Tracking in CMS at the HL-LHC" found on our website. Below are the top 20 most common "Expected Performance of Tracking in CMS at the HL-LHC".
Expected Performance of Tracking in CMS at the HL-LHC
... reconstruction performance, defining the association between reconstructed and simulated tracks is particularly ...standard CMS definition, a reconstructed track is considered associated to a simulated ... See full document
10
Kalman Filter track reconstruction on FPGAs for acceleration of the High Level Trigger of the CMS experiment at the HL-LHC
... The Kalman Filter is ubiquitous in embedded applications, which frequently use FPGAs for their capabilities for tight integration with sensors. Examples include guidance in avi- ation, and control and sensor-fusion ... See full document
6
FPGA-Based Approach to Level-1 Track Finding at CMS for the HL-LHC
... the HL-LHC, L1 trigger rates for single muons, electrons, and jets will exceed the current front- end ...the HL-LHC. Including tracking in the L1 trigger allows for improved lepton ... See full document
10
FPGA-Based Tracklet Approach to Level-1 Track Finding at CMS for the HL-LHC
... the performance of the same triggers when including L1 ...L1 tracking improves the momentum measurement which translates to a sharp turn-on curve at the trigger threshold and a reduced trigger rate ... See full document
11
Particle Flow reconstruction in the CMS Level-1 Trigger For The HL-LHC
... the tracking information in the Level- 1 trigger in CMS for the High-Luminosity Large Hadron Collider (HL-LHC), the algorithms for the Level-1 trigger can be completely ...in CMS to use ... See full document
5
Performance of the LHC, ATLAS and CMS in 2011
... The structure of each of the two experiments is known worldwide already. ATLAS [7] features an air core toroid, high granularity “accordion” lead-liquid argon electromag- netic calorimetry, complemented by Copper/liquid ... See full document
12
The HEP.TrkX Project: deep neural networks for HL-LHC online and offline tracking
... are expected to be useful for pattern-recognition in track ...is expected that the initial layer of a CNN for tracking would identify stubs of com- patible hits in adjacent ... See full document
12
L1 track trigger for the CMS HL-LHC upgrade using AM chips and FPGAs
... For the latency and total time of reconstruction measurements we used the FNAL mezzanine that was developed for this purpose. All the HDL algorithms implemented in the FPGA were running at the frequency of 240 MHz. The ... See full document
10
The CMS Event-Builder System for LHC Run 3 (2021-23)
... the CMS experiment at the CERN Large Hadron Collider (LHC) assembles events of 2 MB at a rate of 100 ...the LHC taking place in ...the performance of the data networks under the event-building ... See full document
8
Development of radiation hard planar silicon tracking detectors for the ATLAS Experiment at the HL-LHC
... The FE-I4 is currently the largest readout chip produced for high energy physics experiments. Its physical size is 20.2 x 18.8 mm 2 with an active area of 20.2 x 16.8 mm 2 . This results in an active to inactive surface ... See full document
258
Top FCNC searches at HL-LHC with the CMS experiment
... order to obtain the discriminating distribution for the statistical analysis. Following sources of uncertainties are treated as nuisance parameters in the fit to the background-only model: the uncertainty in the b ... See full document
5
A Proposal for the Upgrade of the Muon Drift Tubes Trigger for the CMS Experiment at the HL-LHC
... to Δc = 0 is relevant for the determination of hit alignment. This allows to handle one-dimensional histograms, i.e. only the Δc ≈ 0 row of a two-dimensional (m, Δc) histogram. Defining the size of the bins and the best ... See full document
7
Luminosity reduction caused by phase modulations at the HL LHC crab cavities
... they have identical filling patterns and the acceleration cavities run the same control and detuning algorithms [15]. Therefore it will just displace the hori- zontal vertex. However, because HL-LHC bunches ... See full document
27
Exclusive diffractive results from ATLAS, CMS, LHCb, TOTEM at the LHC
... and CMS-TOTEM Precision Proton Spectrometer [10] (CT-PPS) detectors were installed recently in order to detect and measure intact protons in the final state that leads to a possible better identification of ... See full document
9
Updating Monte Carlo collision generators with LHC data up to √s = 8 TeV
... All the models have been extended to p-A and A- A collisions in order to describe the collision of cosmic ray hadrons with air constituents and the comparison with LHC data becomes also possible. Conversely, there ... See full document
6
Search for Heavy Neutral Resonances in the Dielectron Channel with the CMS Detector at the LHC
... improve performance, special OCCI [75] optimization techniques for bulk writing setDataBuffer, executeArrayUpdate and bulk reading setPrefetchRowCount methods were used ... See full document
173
Initial Energy Density of s7 and 8 TeV p+p Collisions at the LHC
... CERN LHC, however, the exploration of additional signatures (radial and elliptic flow, volume or mean multiplicity dependence of the signatures of the nearly perfect fluid in p+p collisions, scaling of the HBT ... See full document
11
Search for new neutral gauge bosons with the CMS Experiment at the LHC
... The CMS physics research programme on the detection of new physics beyond the standard model (SM) is aimed at detecting deviations from SM predictions in various channels ...The CMS searches signals from ... See full document
5
Search for Stop Pair Production at the LHC using the CMS Detector
... model with chargino mass parameter x = 0.25 (bottom left). The color scale indicates the observed cross section upper limit. The observed, median expected and ±1 standard deviation (σ) expected exclusion ... See full document
5
Development of 3D Silicon radiation detectors for neutrons and high energy charged particles
... since its behaviour is expected to be the same as that of a planar detector. In fact, the detector confirmed to be collecting most of the charge already at low voltage and for all the shaping times. Very different ... See full document
204
Related subjects