• No results found

Vibration Amplitude

Single Plane Mass Balancing of Generator Rotor Contemplating Vibration Amplitude Response

Single Plane Mass Balancing of Generator Rotor Contemplating Vibration Amplitude Response

... the vibration levels at both DE (Drive end) and NDE (Non Drive End) was found on the higher side ...The vibration limits for generator rotor is between 2 to 4 mm/sec for safe operation as per ...the ...

9

Effect Of Vibration Amplitude Level On Seated Occupant Reaction Time

Effect Of Vibration Amplitude Level On Seated Occupant Reaction Time

... low vibration amplitude on seated human drowsiness ...between vibration and drowsiness level has been reported, and the obtained results showed a significant increase in reaction time following ...

5

Influence of vibration amplitude on the ultrasonic dispersion of soils

Influence of vibration amplitude on the ultrasonic dispersion of soils

... and vibration amplitude on the process of ultrasonic dispersion of ...ultrasonic vibration, the solution was stirred with a magnetic stirring device (2 Hz, cylindrical shape with length 25 mm and ...

8

Vibration Amplitude Changes With Bridge Span Deterioration

Vibration Amplitude Changes With Bridge Span Deterioration

... In research by Rathish P. Kumar [71], the experimental results obtained from the concrete beam specimen demonstrated the usefulness of the changes in the PSD magnitude as a diagnostic parameter for detecting damage, ...

16

Effect On Vibration Amplitude In Aluminium Rectangular Plate Using Simulation Approach

Effect On Vibration Amplitude In Aluminium Rectangular Plate Using Simulation Approach

... Another research had been made about the analysis of free vibration by using characteristic orthogonal polynomials in assumed mode method. The analysis is done by comparing the different thickness of the plate. As ...

24

An Experimental Study On Drill Vibration, Thrust Force And Surface Roughness In Drilling Of SCF/Carbon Fibre Composite

An Experimental Study On Drill Vibration, Thrust Force And Surface Roughness In Drilling Of SCF/Carbon Fibre Composite

... The experimental results of drill vibration amplitude, surface roughness and thrust force are analysed with ANOVA to identify significant parameters which are affecting the responses. The ANOVA was carried ...

9

Finite Element Analysis and Experimental Study of the Ultrasonic Vibration-assisted Single Point Incremental Forming (UVaSPIF) Process

Finite Element Analysis and Experimental Study of the Ultrasonic Vibration-assisted Single Point Incremental Forming (UVaSPIF) Process

... Ultrasonic Vibration-assisted Single Point Incremental Forming (UVaSPIF) by applying ultrasonic vibration to the hemispherical-head ...ultrasonic vibration resulted in a reduction of the vertical ...

12

The Development of a Digital X-ray Imaging System for The Characterization of Transmission of Whole-Body Vibration in Mice

The Development of a Digital X-ray Imaging System for The Characterization of Transmission of Whole-Body Vibration in Mice

... whole-body vibration platform, as described in detail in Chapter ...during vibration, long-exposure imaging, stroboscopic imaging, and high-speed ...between vibration amplitude and the ...

84

The analysis of a Beam Made of Physical Nonlinear Material on Elastic Foundation Under a Harmonic Load

The analysis of a Beam Made of Physical Nonlinear Material on Elastic Foundation Under a Harmonic Load

... since the vibration amplitude can be determined. From Equation (24), it can be concluded that the resonance of the system depends on the velocity and the circular frequency of load. Knowing X 1 and ...

6

Vibration assisted machining: modelling, simulation, optimization, control and applications

Vibration assisted machining: modelling, simulation, optimization, control and applications

... The modelling is focused on establishing the scientific relationship between the process variables such as vibration frequency, vibration amplitude, feedrate and spindle speed while taki[r] ...

36

DIAGNOSTICS OF WORKPIECE SURFACE CONDITION BASED ON CUTTING TOOL VIBRATIONS DURING MACHINING

DIAGNOSTICS OF WORKPIECE SURFACE CONDITION BASED ON CUTTING TOOL VIBRATIONS DURING MACHINING

... of vibration amplitude were revealed during stainless steel machining, which seems to result from material properties (mainly strength) as well as stainless steel machining ...of amplitude and ...

9

Large-Amplitude Vibration of Imperfect Rectangular, Circular and Laminated Plate with Viscous Damping

Large-Amplitude Vibration of Imperfect Rectangular, Circular and Laminated Plate with Viscous Damping

... larger vibration amplitude and relatively large imperfection while independently Bert [71] conducted comparisons between the new and old composite plate vibration ...plate vibration problem ...

127

Effects Of Inertia And Gas Torques On Engine Crankshaft Systems

Effects Of Inertia And Gas Torques On Engine Crankshaft Systems

... torsional vibration amplitudes leads to detection on specific defects, if any, in the ...of vibration amplitudes is essential for its use in condition monitoring of the ...crankshaft vibration ...

8

Minimax Optimization Of Dynamic Pendulum Absorbers For A Damped Primary System

Minimax Optimization Of Dynamic Pendulum Absorbers For A Damped Primary System

... The vibration amplitude of the primary system which is the objective function is a function of frequency Ω and four parameters:ζ a, ζ p , Tand ...peaks amplitude (α p , α a ) is high in ...

7

Enhancement of the Homogeneity of Micro Slits Prepared by Wire Electrochemical Micromachining

Enhancement of the Homogeneity of Micro Slits Prepared by Wire Electrochemical Micromachining

... anode vibration amplitude of 5 µm, an anode vibration frequency of 100 Hz, a cathode travelling amplitude of 70 µm, a cathode travelling frequency of 2 Hz, a pulse period of 6 µs, and a pulse ...

9

Viscoelastic granular dampers under low amplitude vibration

Viscoelastic granular dampers under low amplitude vibration

... low amplitude using computational resources normally available to practising ...low vibration levels, the majority of the particles would not separate and therefore their behaviour could be represented by a ...

26

The Acute Effect of ArmVibration on Eye Hand Coordination Performance in Youth

The Acute Effect of ArmVibration on Eye Hand Coordination Performance in Youth

... the amplitude and the frequency that were used in the ...the amplitude at an optimum level when organizing the vibration exercises (Brogardh, Flansberj, & Lexell, 2010; Gerodimos, Zaferidis, ...

7

Dynamic analysis and test study of ultrasonic compound micro fine electrical machining system

Dynamic analysis and test study of ultrasonic compound micro fine electrical machining system

... Ultrasonic vibration system is the chief part of ultrasonic compound micro-fine electrical-machining, it is made up of ultrasonic transducer, amplitude transformer and the ...natural vibration ...

7

Study on Vibration of Reciprocating Pump Pipelines Based on Pressure Pulsation Theory

Study on Vibration of Reciprocating Pump Pipelines Based on Pressure Pulsation Theory

... (1) Imbalanced excited force has a great influence on the vibration of the pump outlet pipe (The 390. amplitude increases by 5%~140%) and the main outlet pipe (The amplitude increases b[r] ...

29

A comparison of methods used to predict the vibrational energy required for a reliable thermosonic inspection

A comparison of methods used to predict the vibrational energy required for a reliable thermosonic inspection

... measured vibration closely resembles an average of the vibration of the whole component rather than the desired vibration at the defect ...bulk vibration is not surprising given the omni- ...

12

Show all 5653 documents...

Related subjects