[PDF] Top 20 Effect of Annealing on Structural, Morphological, Electrical and Optical Studies of Nickel Oxide Thin Films

... nanocrystalline nickel oxide (NiO) thin films. The films were annealed at 400 ˚C - 700 ˚C for 1 h in an air and changes in the structural, morphological, electrical ... See full document

... K. Thyagarajan received the M.Sc, M.Phil and Ph.D degrees in Physics from Sri Venkateswara University, Tirupati. He is presently Professor and head in the Department of Physics, JNTUA college of Engineering (Autonomous), ... See full document

... Copper Oxide (CuO) thin film is considered to be a p-type semiconductors which have low band gap ...or annealing [9], low cost production processing [1,3,5], non-toxic nature ...[1,3,5],.good ... See full document

... the films deposited at different substrate temperature and with different thickness show cubic ...these films. Optical studies show the presence of nanocrystalline particles whose size ... See full document

... The effect of annealing on the structural, surface morphological, optical and electrical properties of the prepared films has been ...The structural studies ... See full document

... Nickel oxide is a low cost material allowing for good cyclic reversibility, high coloration efficiency and good ...metal oxide material which has very interesting characteristics such as good ... See full document

... and electrical properties of Zinc oxide thin films (IZO) prepared through spray pyrolysis method is ...IZO thin films decreases as the dopant concentration ...the optical ... See full document

... Abstract Annealing treatment of transparent conducting oxide (TCO) thin films plays a great role in enhancing the optoelectronic properties of the ...in morphological, optical ... See full document

... good optical and electronic properties ...for thin film deposition by thermal ...The electrical, optical and structural properties of phthalocyanine thin films de- pend on ... See full document

... (SnSSe) thin films were prepared by chemical spray pyrolysis ...SnSSe thin films were the surface temperature, distance between surface nozzle and substrate heater and the pressure were ... See full document

... The structural and optical properties of four samples of cobalt phthalocyanine (CoPc) thin films having almost the same thickness deposited onto silicon substrates by organic molecular beam ... See full document

... doped films was done as ...concentrations. Effect of annealing of the films at different temperatures was also studied to obtain films with low resistivity and high ... See full document

... lower annealing temperature attributed secondary phase of ZnS, whereas at higher temperature didn’t exhibited any secondary ...uniform thin film at higher ... See full document

... cobalt oxide thin film an- nealed at 400˚C - ...all films with slight increase in grain size ...cobalt oxide film surface is well cov- ered without any pinholes and ... See full document

... The optical absorption and transmission spectra of CCIS, CdS, and ITO films were recorded in the 300 nm to 1100 nm ...for optical materials and ...the films, ITO, CdS, ITO/CdS are equal 75%, ... See full document

... tin oxide thin films with good ...synthesized films was found to be about 300 nm for 3 minutes deposition ...tin oxide films in the visible region is higher than the tin ... See full document

... were found to have high absorbance in the UV region. This property makes the film candidate for solar control coatings. The structural analysis indicates that the grown film has an average grain size of 0.004µm ... See full document

... the films. If the temperatures are too low the films are ...smooth films can be ...on structural, optical and electrical properties of zinc oxide films deposited by ... See full document

... grown films were characterized by (XPERT-PRO) X-ray diffractometer using Cu-Kα radiation with wavelength, ...of thin film was measured by the weight difference method at room ...deposited films was ... See full document

... X-ray diffraction (XRD) has been taken on a number of annealing condition of cadmium sulfide thin films (as deposited, 300, 400 & 500 C) using monochromatic CuKα (λ = 1.54178 Å) radiation. Figure ... See full document