HTR-10
Energy Consumption Analysis and Comparison of HPC and HPS of HTR-10
... Abstract ： In order to reduce the quantity of chemical impurities and the gaseous radionuclide fission products in the coolant helium, a helium purification system (HPS) should be designed for high temperature gas cooled ...
6
Characteristic Analysis of Rotor Dynamics and Experiments of Active Magnetic Bearing for HTR-10GT
... The 10MW high-temperature gas-cooled test reactor (HTR-10) is the first module high-temperature gas-cooled test reactor in the world. It was constructed by INET at Tsinghua University of China. The modular ...
14
Study on the Improved Recuperator Design Used in the Direct Helium-turbine Power Conversion Cycle of HTR-10
... After the improvement, the heat transfer coefficient of the new recuperator is larger than the former one. It changes from 251W/( m2⋅℃ ) to 339.2W/( m2⋅℃ ). So the structural area of the surface decreases from 945 m2 to ...
6
Turbo-Machine deployment of HTR-10GT
... (HTGR), HTR-10GT has been studied and developed by Institute of Nuclear and New Energy Technology (INET) of Tsinghua University after the success of HTR-10 with steam turbine ...measures. ...
11
HTR-10GT AMBs Displacement Sensor Design
... the HTR-10GT, turbo-compressor and generator rotors are connected by a flexible ...the HTR-10GT AMBs displacement sensors and introduction of the related experiments to demonstrate its ...
6
A Preliminary Design of Pre-service Test Platform for HTR-10GT
... After simulation experiments for the helium turbine was successfully held (Zhu, 2012), a pre- service test platform was designed to verify the technical feasibility of PCU, such as dynamic characteristics of rotor which ...
6
The Development On-Line Monitoring System of Active Magnetic Bearings for HTR-10GT
... of HTR started at the middle of the 1970’s, and came to be a part of the Chinese High Technology Program in ...power 10 MW operation for 72 hours have reached in 2003, and have been checked and accepted by ...
10
Design on the Recuperator Used in Power Conversion Unit with the Direct Helium-Turbine Cycle of HTR-10
... project, HTR-10 Second Phase, was brought forward to add the power conversion unit with direct gas-turbine cycle in the HTR-10 SG’s pressure ...vessel. HTR-10 incorporated with ...
10
Auxiliary Bearing Design and Rotor Dynamics Analysis of Blower Fan for HTR-10
... The 10MW high-temperature gas-cooled test reactor (HTR-10) is the first module high-temperature gas-cooled test reactor in the world. It was constructed by INET at Tsinghua University of China. The modular ...
5
Reliability Analysis of Helium Blower Auxiliary Bearings for HTR-10
... Active magnetic bearing (AMB) instead of mechanical bearing will become the new sustaining assembly for the helium blower of 10MW high-temperature gas-cooled reactor (HTR-10). However, one implication of ...
6
Study of Active Magnetic Bearing for Helium Circulator in HTR-10
... feature. HTR-10 takes the entire ceramic covered granule as the fuel element, the graphite as moderator and the reactor core structural material, and the helium as the cooling ...
6
Design of the Filter Pressure Vessel of HTR-10 Safety Valve Testing Loop
... loop HTR-10 (10 MW High Temperature Gas Cooled Reactor), in order to prevent particles in flow medium from damaging the sealing surface of the safety valves, the flow medium has to be ...
6
Irradiation Stress Analysis of Graphite Bricks in HTR-10 - A Finite Element with Hybrid Model
... of HTR-10, high temperature reactor- test module in the Institute of Nuclear and New Energy Technology of Tsinghua University, Beijing, has been conducted, considering irradiation induced deformation and ...
9
Stress and Seismic Calculation of HTR-10 Primary Loop Pressure Relief System (K417)
... 10MW High Temperature Gas Cooled Reactor (HTR-10) was constructed in INET of Tsinghua University and reached the first full power operation in January 26, 2003. Steam Generator (SG) heat transfer tubes of ...
6
Feasibility Analysis of Method to Avoid Tube Rupture in HTR-10 Steam Generator
... Because the pressure on the secondary side is higher than the helium pressure on the primary side, a heat transfer tube rupture will cause water and stream in the SG to fl[r] ...
5
Irradiation Behaviour and Structural Analysis of HTR/VHTR Graphite Core Components
... There are two main high-temperature gas cooled reactor (HTR) design concepts: a pebble-bed concept (as used in AVR, THTR, HTR-10 and PBMR) and a prismatic concept (as used in Dragon, Peach Bottom, ...
10
Progress of HTR-M Projects for the HTR (S443)
... under HTR relevant conditions are required and need to be compiled for candidate materials of different HTR concepts, in relation to both normal and accident ...and HTR-10 (China) - use a ...
8
Targeting Human Telomerase RNA via Biochemical and in vitro Selection Methods
... Phylogenetic studies performed by Chen et al. (2000) show that positions 8 and 10 are 100% conserved. Therefore, these mutant hairpins are not expected to shift RNA33-147. Positions 7 and 9 are not 100% conserved; ...
100
Materials for the High Temperature Reactor (HTR)
... This is a key component and HTR-M investigations will establish the available information on a few selected vessel steels and a database for design and feasibility investiga[r] ...
8
Hyperprolactinemia in Thai children and adolescents with autism spectrum disorder treated with risperidone
... In all cases, baseline prolactin levels prior to the initiation of antipsychotic therapy were not available for comparison, and no comparable group on another atypical antipsychotic agent was available. All participants ...
6