• No results found

DG Placement

Multi DG placement in practical 
		distribution system for maximum cost saving with increasing load 
		scenario

Multi DG placement in practical distribution system for maximum cost saving with increasing load scenario

... multi DG placement for the first year of planning period is given in ...multi DG placement, the voltage profile has a significant increase in magnitude at multiple ...The DG investment ...

9

Optimal DG Placement in Distribution Networks Using Intelligent Systems

Optimal DG Placement in Distribution Networks Using Intelligent Systems

... of DG. The optimal DG placement defined in [6] takes productivity, cost effectiveness, loss reduction, and reliability and DG type into account and fails to consider other ...parameters: ...

7

Multiple DG Placement in Radial Bus System using Weight Adaptive Swarm Intelligence to Improve Voltage Profile

Multiple DG Placement in Radial Bus System using Weight Adaptive Swarm Intelligence to Improve Voltage Profile

... multi-location DG placement ...for DG placement and power flow analysis is done to evaluate electricity losses and voltage profile at all ...type-1 DG placement is ...

6

Comparative study on optimum DG placement for distribution network

Comparative study on optimum DG placement for distribution network

... [8]. DG has many advantages in terms of improved system efficiency stability, economical, environmental and technical benefits ...of DG installations has been increased ...of DG units were 2631, now ...

7

Network Reconfiguration and DG Placement in Distribution Systems for Power Loss Minimization and Reliability Optimization

Network Reconfiguration and DG Placement in Distribution Systems for Power Loss Minimization and Reliability Optimization

... The ability of a Distribution network is to provide uninterrupted power to its consumers is a measure of reliability of the network. Reliability indices are SAIFI,SAIDI AND CAIDI etc., which are called performance ...

7

Active Power Loss Minimization Using Simultaneous Network Reconfiguration and DG Placement with AGPSO Algorithm

Active Power Loss Minimization Using Simultaneous Network Reconfiguration and DG Placement with AGPSO Algorithm

... and DG installation method is more effective in reducing power loss and improving the voltage profile compared to other ...to DG size is highest when number of DG installation locations is ...and ...

10

Optimal Placement of Capacitor and DG for Minimization of Power Losses using Genetic Algorithm and Artificial Bee Colony Algorithm

Optimal Placement of Capacitor and DG for Minimization of Power Losses using Genetic Algorithm and Artificial Bee Colony Algorithm

... of DG going to place in these systems for minimizing power losses and improving voltage ...two DG placement is less than the losses with single DG ...

7

Distributed generation (DG) placement for 
		reducing power losses on radial distribution system using
		K means Clustering method

Distributed generation (DG) placement for reducing power losses on radial distribution system using K means Clustering method

... of DG can be the solution improving network ability from decreasing power loss, voltage profile improvements, power quality, also reliability ...on DG placement can make the system get bigger loss ...

8

Optimum multi DG units placement and sizing based on voltage stability index and PSO

Optimum multi DG units placement and sizing based on voltage stability index and PSO

... Abstract-Optimum DG placement and sizing is one of the current topics in restructured power ...optimum placement base on the power losses reduction ...multi DG placement and sizing for ...

6

Multiple Distributed Generators Placement for Enhancement of Voltage stability and Minimizing Energy Loss at Minimum Cost in RDNs

Multiple Distributed Generators Placement for Enhancement of Voltage stability and Minimizing Energy Loss at Minimum Cost in RDNs

... with DG placed to minimize loss is subjected assessment of voltage ...stability. DG placement is further adjusted to minimize the stability index ...of DG placement, based on cost ...

10

Network Reconfiguration and DG Placement in Distribution Systems for Power Loss Minimization and Reliability Optimization

Network Reconfiguration and DG Placement in Distribution Systems for Power Loss Minimization and Reliability Optimization

... DG is a method in which power generated at the load centers by using available source of energy like thermal, wind energy etc. DG method is for bulk generation of power has its own advantages such as low ...

7

Loss Minimization by Optimal DG Placement on Radial Distribution Network

Loss Minimization by Optimal DG Placement on Radial Distribution Network

... to DG placement in the system it can be clearly seen from the graph no 6 that reactive power losses have drastically reduced in distribution line section number 1 to 9 but the reactive power losses have ...

13

Optimal Placement And Sizing Of Distributed Generation Considering Costs Of Operation Planning

Optimal Placement And Sizing Of Distributed Generation Considering Costs Of Operation Planning

... as DG units can be very effective in improving technical, economical and especially environmental characteristics of distribution systems ...(PV) DG is used to generating power from the solar energy such as ...

24

DG Placement and Penetration under Standard Market Design using GA and PSO

DG Placement and Penetration under Standard Market Design using GA and PSO

... the DG placement and penetration problem. The DG is a viable solution at a node provided that cost of grid electricity is higher than the DG electricity ...of DG reduces the LMPs in the ...

9

The Phenomenal Alleviation of Transmission Congestion by Optimally Placed Multiple Distributed Generators Using PSO

The Phenomenal Alleviation of Transmission Congestion by Optimally Placed Multiple Distributed Generators Using PSO

... optimal DG placement problem in distribution networks with different topologies ...of DG optimal size is not addressed in this ...optimal placement of DG ...of DG, without ...

13

Performance Enhancement in Optimal Placement and Sizing of Wind Based DG in Distribution System Using Firefly Optimization Technique

Performance Enhancement in Optimal Placement and Sizing of Wind Based DG in Distribution System Using Firefly Optimization Technique

... Abstract-Proper placement of DG in distribution system is still very challenging issues for obtaining their maximum potential ...Unit placement suggest for power loss reduction and voltage stability ...

9

A Genetic Algorithm Based DG placement Approach to Optimize Power System Distribution

A Genetic Algorithm Based DG placement Approach to Optimize Power System Distribution

... Abstract— Distributed Generators are very effective to monitor the power system and to take the decisions regarding the load distribution over the system. In such power system, the main challenge is about to identify the ...

5

Improvement of bus voltages and line 
		losses in power system network through the placement of capacitor and DG 
		using PSO

Improvement of bus voltages and line losses in power system network through the placement of capacitor and DG using PSO

... both DG and Capacitor in the distribution system network; the OpenDSS engine was developed to provide a very flexible research Platform, and as a base for distribution analysis enforcement such as Distributed ...

11

Placement of dg and capacitor for loss reduction and reliability 
		improvement in radial distribution systems using BFA

Placement of dg and capacitor for loss reduction and reliability improvement in radial distribution systems using BFA

... Furthermore, it is assumed if the reactive or active component of a distributor section current is fully compensated, its failure rate reduces to 85% of its uncompensated failure rate [13 - 14] and for partial ...

10

UPQC with Islanding and Grid Connection for Microgrid Applications

UPQC with Islanding and Grid Connection for Microgrid Applications

... In the case of power quality problems, it is reported that more than 95% of voltage sags can be compensated by injecting a voltage up to 60% of the nominal voltage, with a maximum duration of 30 cycles. Therefore, based ...

8

Show all 1958 documents...

Related subjects