• No results found

[PDF] Top 20 Catalytic Activity of Ni-YSZ composite as Anode for Methane Oxidation in Solid Oxide Fuel Cells

Has 10000 "Catalytic Activity of Ni-YSZ composite as Anode for Methane Oxidation in Solid Oxide Fuel Cells" found on our website. Below are the top 20 most common "Catalytic Activity of Ni-YSZ composite as Anode for Methane Oxidation in Solid Oxide Fuel Cells".

Catalytic Activity of Ni-YSZ composite as Anode for Methane Oxidation in Solid Oxide Fuel Cells

Catalytic Activity of Ni-YSZ composite as Anode for Methane Oxidation in Solid Oxide Fuel Cells

... to methane for the Ni/YSZ anode supported ...to methane addition was ...and anode delamination were avoided under this ... See full document

14

Planar copper containing anode-supported solid oxide fuel cells

Planar copper containing anode-supported solid oxide fuel cells

... the catalytic activity and the electrical conductivity, the material used in the cathode must be stable in strongly oxidising atmosphere and have both chemical and mechanical compatibility with other cell ... See full document

95

Optimization of Flow Rate for Improving Performance and Stability of Ni-YSZ based Solid Oxide Fuel Cells Using CH4 Fuel

Optimization of Flow Rate for Improving Performance and Stability of Ni-YSZ based Solid Oxide Fuel Cells Using CH4 Fuel

... in catalytic activation ...on Ni-YSZ have been sought to overcome carbon ...and anode thickness, deposited carbon became more difficult to ...that Ni-YSZ anode- supported ... See full document

13

La and Ca doped A site deficient strontium titanates anode for electrolyte supported direct methane solid oxide fuel cell

La and Ca doped A site deficient strontium titanates anode for electrolyte supported direct methane solid oxide fuel cell

... (Ni-YSZ) composite anode matrices in a solid oxide fuel cell ...of anode catalyst for direct hydrocarbon SOFC with improved electrochemical properties and ... See full document

24

Synthesis and Characterization of La0 75Sr0 25Cr0 5Mn0 5O3 δ Nanoparticles Using a Combustion Method for Solid Oxide Fuel Cells

Synthesis and Characterization of La0 75Sr0 25Cr0 5Mn0 5O3 δ Nanoparticles Using a Combustion Method for Solid Oxide Fuel Cells

... capable anode material for SOFCs due to its electrocatalytic/catalytic activity for oxidation of methane fuel in the absence of steam, re- duced carbon deposition, and high ... See full document

5

Materials Development for the Fabrication of Metal-Supported Solid Oxide Fuel Cells by Co-sintering

Materials Development for the Fabrication of Metal-Supported Solid Oxide Fuel Cells by Co-sintering

... porous YSZ anode (without the catalyst) is co- sintered with metal support, electrolyte and possibly other layers at high temperature in reducing ...the anode catalyst coats the metal support as well ... See full document

156

Influence of Dry Methane Reactions on the Cell Output Characteristics of Solid Oxide Fuel Cells

Influence of Dry Methane Reactions on the Cell Output Characteristics of Solid Oxide Fuel Cells

... a Ni-ScSZ anode with different concentrations of dry methane as ...the anode ex- haust gas and through examination of the activation energy on the cell anode oxidation reaction, ... See full document

11

Studies of anode supported solid oxide fuel cells (SOFCs) based on La  and Ca Doped SrTiO₃

Studies of anode supported solid oxide fuel cells (SOFCs) based on La and Ca Doped SrTiO₃

... that YSZ scaffold structure could be modified by treatment in hydrofluoric acid [276], therefore titanate might topographically react in nitrate solution during impregnation and the subsequent firing process, ... See full document

247

Investigations of Ni SDC carbonate (Ni SDCC) as composite anode for low temperature solid oxide fuel cells

Investigations of Ni SDC carbonate (Ni SDCC) as composite anode for low temperature solid oxide fuel cells

... an anode component of the SOFC must possess several characteristics to perform in stringent working environment such as great chemically stability, suitable porosity for gaseous transport, good electrochemical ... See full document

48

Strain Accumulation Study of Ni-based Anode-Supported Solid Oxide Fuel Cells under Partial-Redox Cycling Conditions

Strain Accumulation Study of Ni-based Anode-Supported Solid Oxide Fuel Cells under Partial-Redox Cycling Conditions

... oxidized anode due to air penetration into the inner anode regions through cracks that develop in the YSZ ...the oxidation percentage was stable even there were fine cracks ...the anode ... See full document

11

Modification of Anode Microstructure to Improve Redox Stability of Solid Oxide Fuel Cells (SOFCs)

Modification of Anode Microstructure to Improve Redox Stability of Solid Oxide Fuel Cells (SOFCs)

... of oxidation, on the re-oxidation behaviour of a cell without changing the properties of the cell (porosity, microstructure, thickness of the anode, NiO/YSZ ratio, particle size distribution, ... See full document

184

Influence of Silver (Ag) Addition on the Morphological and Thermal Characteristics of NiO-SDC Carbonate Composite Anode

Influence of Silver (Ag) Addition on the Morphological and Thermal Characteristics of NiO-SDC Carbonate Composite Anode

... highly catalytic noble metal, such as platinum (Pt) and palladium (Pd), into electrodes is one possible strategy to improve the triple phase boundary (TPB) length ...electrocatalytic activity, high oxygen ... See full document

6

Performance evolution of niobium doped lanthanum strontium ferrate perovskite anode for solid oxide fuel cells

Performance evolution of niobium doped lanthanum strontium ferrate perovskite anode for solid oxide fuel cells

... Solid oxide fuel cell (SOFC) is an efficient, cost-effective and environmental friendly energy conversion device by electrochemical reactions with fuel-flexibility, which has attracted ... See full document

8

Development and characterisation of an A site deficient perovskite as alternative anode material for solid oxide fuel cells

Development and characterisation of an A site deficient perovskite as alternative anode material for solid oxide fuel cells

... the catalytic activity of LST towards the oxidation of hydrogen is relatively low compared to ...the catalytic activity of LST were proposed. First, the catalytic activity ... See full document

265

Development and testing of impregnated La0 20Sr0 25Ca0 45TiO3 anode microstructures for solid oxide fuel cells

Development and testing of impregnated La0 20Sr0 25Ca0 45TiO3 anode microstructures for solid oxide fuel cells

... Fuel cell testing was carried out in a sealless setup in order to provide an analogous testing environment to the HEXIS ...2 fuel gas and compressed air as an oxidant (both at flow rates of 250 mL ... See full document

11

Development of Novel Anode material for Intermediate Temperature SOFC (IT SOFC)

Development of Novel Anode material for Intermediate Temperature SOFC (IT SOFC)

... alumina fuel cell test fixture using ceramic cement (Ceramabond 552VFG, ...the fuel cell test setup after sealing the anode ...the anode compartment was purged with Ar+5%H 2 gas in order to ... See full document

10

Nickel Based Nano Particles as Adsorbents in Water Purification Methods – A Review

Nickel Based Nano Particles as Adsorbents in Water Purification Methods – A Review

... metal oxide nano particles are to be prepared, in place of reducing agents, precipitating agents are needed for precipitating the metal ions as hydroxides and/or hydrated oxide under controlled conditions ... See full document

11

Fabrication of anode supported zirconia thin film electrolyte based core–shell particle structure for intermediate temperature solid oxide fuel cells

Fabrication of anode supported zirconia thin film electrolyte based core–shell particle structure for intermediate temperature solid oxide fuel cells

... 8 mol% yttria stabilized zirconia (8YSZ, 99.9 wt%, Pi-Kem Ltd.) and nickel oxide (NiO, Type F, NOVAMET) were used as starting materials for preparation of anode substrate. NiO and 8YSZ powder were mixed in ... See full document

6

Synthesis of Na<sub>2</sub>WO<sub>4</sub> Mn Supported YSZ as a Potential Anode Catalyst for Oxidative Coupling of Methane in SOFC Reactor

Synthesis of Na<sub>2</sub>WO<sub>4</sub> Mn Supported YSZ as a Potential Anode Catalyst for Oxidative Coupling of Methane in SOFC Reactor

... of methane (OCM) to C2-hydrocarbons has attracted much attention during the past three decades as it is a potential route in utilizing methane, a major component of natural gas and a byproduct of oil ... See full document

8

Thin film components for solid oxide fuel Cells (SOFCs)

Thin film components for solid oxide fuel Cells (SOFCs)

... The phi scan results in a pattern of 4 peaks that are 90° apart in a cubic system. In this example where the scan is aligned around the orientation, the response from the peak is joined by peaks from three further ... See full document

285

Show all 10000 documents...