angular position
New Method For Determining The Angular Position Of The Light Reflection Intensity Minimum Observed In Surface Plasmon Resonance
... This work is aimed at development of mathematical methods for determination of the minimum angular position R(ΞΈ). The authors have offered a new method named by them as the βmethod of mean lineβ. This ...
5
Conical diffraction of linearly polarised light controls the angular position of a microscopic object
... In conclusion, the linearly polarised case of internal conical diffraction produces a crescent- shaped beam whose intensity and polarisation vary in a unique way. Rotation of the plane of the linearly polarised light ...
8
Improving PID controller of motor shaft angular position by using genetic algorithm
... shaft angular position control on the Lab-Volt 8063 Digital Servo plant, the servomotor controller repeatedly has a problem in achieving the desired position control and system performance have an ...
42
DC Motor Angular Position Control using PID Controller with Friction Compensation
... Abstract- This paper finds to get the precision of angular position control for DC geared motor using PID controller. The Arduino microcontroller board is mainly used to control the 12V brushed Namiki DC ...
7
Precise Control of Angular Position of Geared DC Motors for Low Cost Applications
... ABSTRACT:Precise control of angular position are very crucial for robotic applications. This however leaves hobbyists with no other choice but to choose between a stepper motor, which has a slow response ...
5
High Accuracy Walking Motion Trajectory Generation Profile Based On 6-5-6 PSPB Polynomial Segment with Polynomial Blend
... Furthermore, the kinematics constraint (π, πΜ, πΜ, πππ πβ) between the two blended polynomial function must ideally match. Otherwise, there will be an error. The error generates a less accurate trajectory profile that ...
12
PID Parameters Optimization Using Genetic Algorithm Technique for Electrohydraulic Servo Control System
... Electrohydraulic servosystem have been used in industry in a wide number of applications. Its dynamics are highly nonlinear and also have large extent of model uncertainties and external disturbances. In order to in- ...
8
Stability studies of fuzzy logic based power system stabilizer in enhancing dynamic stability of a two generators tie line system
... in Figure 10 (a), (b) and (c)for the systems with 0% change of input torque for generator 1 and 20% for generator 2. Time is 120 sec using 16 rules in fuzzy logic controller. Figure-10 (a), (b) and (c) show ...
8
Tilt Angle Detector Using 3-Axis Accelerometer
... This paper describes accelerometer, which is an electromechanical device that can be used for various applications like tilt detection, obstacle detection, motion inputs, earthquake sensing, etc. Tilt detection is a ...
8
Position Control of a Three Degree of Freedom Gyroscope using Optimal Control
... gyrscope position control have been designed and controlled using optimal control ...the angular position of the second axis have been analyzed while the third axis are kept free from ...random ...
9
ANGULAR POSITIONING ACCURACY OF ROTARY TABLE AND REPEATABILITY OF FIVE-AXIS MACHINING CENTRE DMU 65 MONOBLOCK
... The majority of modern CNC machine tools enable linear and angular error compensa- tion. If repeatable, angular position errors can be compensated. Removing or minimising er- rors leads to improving ...
7
Large-uncertainty intelligent states for angular momentum and angle
... and position is obtained for states which also minimize the uncertainty ...for angular momentum and angular position both sides of the inequality are state dependent and therefore the ...
20
Entropic uncertainty minimum for angle and angular momentum
... for angular momentum and angular position [8, 9] is much less well-known than the Heisenberg uncertainty relationship for linear position and ...of angular position imposes a ο¬ ...
6
Time frequency localisation of defects using broadband pulsed arrays
... As the pulsed wavefront will cover all of the multi-skip paths to the defect sim- ultaneously, the signal received will contain all of these echoes. Therefore, a form of time-frequency analysis is required in order to ...
218
Power Generation for a 2D Tethered Wing Model with a Variable Tether Length
... The initial conditions for the third phase are not exactly the mirror of the first phase because our study is conducted in the transient state of the cycle. At the end of the second phase the kite-system is not at a zero ...
173
Nuclear Astrophysics at ELI-NP: the ELISSA prototype tested at Laboratori Nazionali del Sud
... degrader shifted the energy peak to 1 MeV and, due to energy straggling, the energy range reached energy as low as zero. The result of this run is reported in the left panel of fig. 2 showing the position Vs. ...
6
The Various Speeds of Lights in Inertial Frames of Reference
... stationary position compared to the same period measured from a receding or approaching position was quite small, but became obvious when Roemer added forty periods on approach, compared to forty periods ...
6
1. Position space information density
... Abstract-The position space and momentum space information densities analyze the amount of information for quantum mechanical systems and used to study the characteristic properties of different ...The ...
5
An improved photometric stereo through distance estimation and light vector optimization from diffused maxima region
... other additional imaging modality. The method firstly identifies Lambertian diffused maxima region to calculate the object distance from the camera, from which the corrected per-pixel light vector is able to be derived ...
28
Modeling and simulation of wind turbine for partial load operation
... Pitch angle Tip speed ratio, optimal tip speed ratio Shaft position angle at rotor, shaft position angle at generator Air density Angular velocity of rotor, angular velocity of generator[r] ...
8