• No results found

Location and Sizing

A Multi-objective Optimization Approach for Optimal Location and Sizing of SVC to Enhance Power System Security
                 

A Multi-objective Optimization Approach for Optimal Location and Sizing of SVC to Enhance Power System Security  

... The table (7) populates the results of voltage deviation and overload for different scenarios, for before and after the placement of SVC. It is obvious from the results presented that the voltage profile has improved and ...

8

Optimal Location and Sizing of Distributed Generation (DG) To Minimize Power Loss Using Particle Swarm Optimization (PSO)

Optimal Location and Sizing of Distributed Generation (DG) To Minimize Power Loss Using Particle Swarm Optimization (PSO)

... optimal location and sizing of the distributed generation in the distribution network to minimize the active power loss includes the power flow with and with-out distributed generation in the distribution ...

9

Optimal Location and Sizing of DG in Distribution System using Moth Swarm Optimization (MSO)

Optimal Location and Sizing of DG in Distribution System using Moth Swarm Optimization (MSO)

... and sizing DG in an electric distribution network for minimization of power ...optimal location and size of ...and location of DG in radial distribution ...

5

Optimal Location and Sizing of Distributed Generation for Minimizing Power Loss Using Simulated Annealing Algorithm

Optimal Location and Sizing of Distributed Generation for Minimizing Power Loss Using Simulated Annealing Algorithm

... non-optimal location can result in an increase in system losses, damaging voltage ...the location, sizing and numbers of distributed generations depending on power loss reduction and voltage profile ...

7

A Firefly Algorithm for Optimal Location and Sizing of Capacitors on Radial Distribution Systems

A Firefly Algorithm for Optimal Location and Sizing of Capacitors on Radial Distribution Systems

... and location of shunt capacitors for loss reduction in distributionnetwork considering non- uniform distribution of ...and sizing isdone by the loss sensitivity factor and PSO ...optimal location of ...

5

Optimal Location and Sizing of UPFC to Enhance Power System Security Using Modified BFOA
                 

Optimal Location and Sizing of UPFC to Enhance Power System Security Using Modified BFOA  

... A modified BFOA approach for placement of UPFC has been formulated and presented. A multi objective function comprising voltage deviation, system overload and real power losses has also been successfully framed and ...

7

FUZZY LOGIC BASED OPTIMAL LOCATION AND SIZING OF DSTATCOM IN RADIAL DISTRIBUTION SYSTEMS

FUZZY LOGIC BASED OPTIMAL LOCATION AND SIZING OF DSTATCOM IN RADIAL DISTRIBUTION SYSTEMS

... 123 | P a g e mathematical modeling of DSTATCOM which is the optimum size of DSTATCOM at each bus. A novel methodology for determining the optimum location of DSTATCOM is presented in Section 4. In Section ...

8

Application of Imperialist Competitive Algorithm for Optimal Location and Sizing of Static Compensator Considering Voltage Profile

Application of Imperialist Competitive Algorithm for Optimal Location and Sizing of Static Compensator Considering Voltage Profile

... In each iteration, the specific particle is placed into the power grid, real and reactive net powers are updated corresponding to the specific particle. Power flow is done, and new value of bus voltages corresponding to ...

10

Application of Particle Swarm Optimization for the Reactive Power Compensation using STATCOM in a Transmission System in the presence of Photovoltaic Integration

Application of Particle Swarm Optimization for the Reactive Power Compensation using STATCOM in a Transmission System in the presence of Photovoltaic Integration

... ABSTRACT: The main aim of this paper is to implement the particle swarm optimization technique for finding the optimal location and sizing of the static synchronous compensator (STATCOM) in the system. The ...

10

A Novel Method for Determining Optimal Location and Capacity of DG and Capacitor in Radial Network Using Weight-Improved Particle Swarm Optimisation Algorithm (WIPSO)

A Novel Method for Determining Optimal Location and Capacity of DG and Capacitor in Radial Network Using Weight-Improved Particle Swarm Optimisation Algorithm (WIPSO)

... Owing to some inherent features of distribution system which includes radial structure, unbalanced distributed loads, large number of nodes, and a wide range of R/X ratios results in failure of conventional load flow ...

8

Optimal Location of SVC for Voltage Stability Enhancement under Contingency Condition through PSO Algorithm

Optimal Location of SVC for Voltage Stability Enhancement under Contingency Condition through PSO Algorithm

... optimal location and sizing of Static Var Compensator (SVC) to improve voltage stability under the most critical line outage contingency in a power system ...the location and size of the ...

7

Optimal Sizing Of Distributed Generation For Voltage Profile Improvement Considering Maximum Loadability Limit

Optimal Sizing Of Distributed Generation For Voltage Profile Improvement Considering Maximum Loadability Limit

... The standard IEEE-14 bus system consists of 6 generator bus, 9 load buses and 20 transmission lines. The generator buses are 1, 2, 3, 6 and 8 with the slack bus connected to node 1. The other nodes are connected to all ...

6

Multi facts devices installation for loss minimization and techno economic impact assessment based on
computational intelligence technique

Multi facts devices installation for loss minimization and techno economic impact assessment based on computational intelligence technique

... optimal location and sizing of FACTS devices using computational intelligence technique: namely Particle Swam Optimization (PSO) technique for single objective function to minimize the transmission loss ...

66

Joint Multi-item Storage Location Assignment Capacitated Lot Sizing Problem

Joint Multi-item Storage Location Assignment Capacitated Lot Sizing Problem

... lot sizing problem (CLSP) is one of the most important and most difficult problems in production planning (Karimi et ...lot sizing problem was considered to be NP hard by Florian and Klein (1971) and Bitran ...

191

Optimal Placement & Sizing Of Distributed Generation (DG) To Minimize Active Power Loss Using Particle Swarm Optimization (PSO)

Optimal Placement & Sizing Of Distributed Generation (DG) To Minimize Active Power Loss Using Particle Swarm Optimization (PSO)

... optimal location and sizing of the distributed generation in the distribution network to minimize the active power loss includes the power flow with and with-out distributed generation in the distribution ...

9

Optimal Placement of DSTATCOM in Radial Distribution System using Fuzzy and Penguins Search Optimization Algorithm

Optimal Placement of DSTATCOM in Radial Distribution System using Fuzzy and Penguins Search Optimization Algorithm

... optimal location of FACTS devices [5- ...optimal location and sizing of ...the location and size of DSTATCOM by using particle swarm optimization ...

6

Optimal Sizing &Placement of D-STATCOM in Radial Distribution System using Power Loss Index and Bio Inspired Algorithm

Optimal Sizing &Placement of D-STATCOM in Radial Distribution System using Power Loss Index and Bio Inspired Algorithm

... ABSTRACT:An effective methodology is proposed in this paper to optimally size and place the D-STATCOM in distribution system usingPower Loss Index (PLI)and bio inspired algorithm known as Flower Pollination Algorithm ...

5

Application of Gravitational Search Algorithm for Planning Distribution Networks with Multiple Dg Units Based On Their Real and Reactive Power Delivering Capability

Application of Gravitational Search Algorithm for Planning Distribution Networks with Multiple Dg Units Based On Their Real and Reactive Power Delivering Capability

... TABLE I shows the optimization result for the IEEE 34 bus radial distribution system with the integration of Type A DG alone. The optimal location and sizing of three DGs attained are at buses 26, 8, 29 and ...

11

Improvement of Voltage Stability in Power System by Using SVC and STATCOM

Improvement of Voltage Stability in Power System by Using SVC and STATCOM

... the location ,sizing and cost comparison of these FACTS devices with traditional reactive power/voltage stability devices are ...the location and quantity of the load to be shed in order to avoid ...

7

Optimal Placement of Wind Farm on the Power System Using Multiobjective Bees Algorithm

Optimal Placement of Wind Farm on the Power System Using Multiobjective Bees Algorithm

... best location and sizing of wind farm on power system with minimum economic and emission of ...optimum sizing and location can reduce fuel cost and emission pollutant of ...

5

Show all 10000 documents...

Related subjects